![Pats Heavy Equipment](https://www.lumbermenonline.com/logos/6685/PatsLogo.jpg?width=125&mode=pad)
906-883-3800
We offer used equipment and sell to customers all over the world. Our focus is on high quality customer service and helping you find the equipment that you need so you can focus on your business or project. If we don’t have something in stock that you are looking for, just let us know and we can find it for you. Not sure what you need? Just give us
42 Results Found
![](https://www.lumbermenonline.com/logos/6685/PatsLogo.jpg?width=100&mode=pad)
906-883-3800
$69,500
2010 Case 330B, 4680 hrs., 30 Ton Capacity, Cummins M11-C turbo diesel, powershift Transmission, 6x6, Full Lockers, Disc Brakes EROPS, Heat/AC, Tires 23.5R25, $69,500
$11,995
1997 Case 660 Trencher, 2400 hrs., tile plow, backhoe setup, backfill blade, 4 cyl. Cummins, 4 wheel drive, like new rubber, $11,995
$79,500
2017 CAT 545D, 9351 hrs., dual arch grapple, a winch, Tires at 75%, and is pretty nice and straight, $79,500
$79,500
2015 CAT 525D, 7960 hrs., Heat/AC, dual arch, winch 30.5L-32 tires at 75%, panel are all nice and straight, $79,500
$149,500
2009 CAT 574, 5438 hrs., 1 owner, 8 Wheel Cat 574 w/ John Deere D/A grapple, 2 sets of tracks, great option for soft ground conditions, to reduce ground pressure, or when the 8 wheel drive traction is needed, $149,500
2016 CAT 522B, 2700 hrs., Undercarriage good, Quadco HF201B 24” 360 degree rotation, $349,500
2012 CAT 501 HD, 9377 hrs., Tracks are 24" x 8" double grouser style pads at 50% , sprockets and idlers about 75%, 2 roller skidmore conversion, $149,500
$22,000
Dressta TD8H, 6044 hrs., 6 way 7’9” blade, Rebuilt transmission, Lever steering, Cummins 4BT, Undercarriage roughly 50%, 17” single grouser pads, 3 speed travel works as it should, $22,000
$129,500
2017 Fecon FTX128R, 1468 hrs., Cummins engine, guards and panels are all in nice shape, rubber style tracks, Undercarriage roughly 75%, Heat/AC, pre-heater, $129,500
$89,500
$139,500
2011 John Deere 1210E, 13,993 hrs., spin cab, Extend a boom, the panels, doors, glass, and guards in great shape, Webasto pre-heater installed, very nice straight machine, $139,500
$129,500
2015 John Deere 1010E, 17,634 hrs., Espar pre heater, Deere 4045 POWERTECH w/2 speed hydrostat trans., boom runs smooth, front tires 710 /55 R34 40%, Rears 710 /40-24.5 40%, PC Monitor, $129,500
$89,500
2005 John Deere 1010D, 11,826 hrs., single bunk, Deere 4045 4 cyl. turbo diesel, Hydrostatic 2 speed travel, 572 Crane, 600 rubber all around, Heat/AC, $89,500
2010 John Deere 753J, 11,890 hrs., Quadco OFH 360 20B head, Deere 6068 Turbo Diesel engine, 2 spd. Trans., undercarriage roughly 40% , 24" single grouser pads, EROPS, Heat/AC, Radio, Joystick Controls, preheater, $129,500
$89,500
2006 John Deere 1110D, 17,021 hrs., Heat/AC, 6068HT John Deere Turbo Diesel, Hand controls, CF510 extendable boom w/J De Souza grapple, bunk approx. 16'x8', blade approx..71", Uniden UM 380 Communication Radio, Stereo, 710/55-34 front tires, 710/45-26.5 rear tires, tires roughly 75%, $89,500
$109,500
2007 John Deere 548GIII, 17,965 hrs., 6068T 6.8L engine, Powershift transmission, continuous rotation grapple, winch, chains, blade, Heat/AC, Joystick controls, pins and bushings were all replaced 1500 hours ago, very tight and dry, great condition, $109,500
2008 John Deere 1270D, 21,419 hrs., 1400 hours on new Hyd. pump and alternator, new feed roller motor 20 hours ago, new batteries, newer 2013 model H480C Waratah, rotate and leveling cab works well, Webasto pre heater, 700/50/26.5 tires roughly 50%. Hi/low range, Forward/reverse, comes w/1 set of Tracks, $69,500
$149,500
2015 Komatsu 855.1, 13,861 hrs., AGCO Turbo diesel engine, 8x8, Diff locks, Komatsu CRF 8.1 crane, extendable boom, supergrip bypass grapple w/rotator, 96" decking blade, EROPS, Heat/AC, Radio, Joystick controls, Maxi Explorer OS, Webasto pre heater, 710/45R26.5 tires, $149,500
$295,000
2021 Komatsu 845, 3231 hrs., 4 cyl., hydrostatic trans., preheater, Forest King 710/45-26 tires 60%, fixed cab, comes with 1 set of tracks, blade with new cutting edge, $295,000
2015 Komatsu XT430-3, 7448 hrs., double grouser style pads @ 75%, rotating can, 2 speed hydrostatic transmission, Quadco 360° rotating head, $239,500