Pats Heavy Equipment
 906-475-8582

We offer used equipment and sell to customers all over the world. Our focus is on high quality customer service and helping you find the equipment that you need so you can focus on your business or project. If we don’t have something in stock that you are looking for, just let us know and we can find it for you. Not sure what you need? Just give us

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 2
30 Results Found
Sort By 
Pats-Heavy-Equipment
 906-475-8582
2013 Komatsu XT430-2  Feller Buncher
$189,500

Very nice owner operated buncher here. 9,537 hours. Clean inside and out. Heat & A/C. 360 degree rotation head. Cummins power runs excellent! New teeth on cutting disk. 24 inch pads. Good undercarriage at roughly 80%. Quadco head. Model is QFH. Serial number is 21SC163 for head. Preheater. We do take trades depending on what you have. Hydraulics are very strong. Excellent track power. Please feel free to call us as well. We can also assist with trucking if needed. Thanks for looking!!

 Greenland, MI
 906-475-8582

 Call
2017 Komatsu XT430L-3  Feller Buncher
$375,000

2017 Komatsu XT 430 L with 1775 hours, like new!!!! 22 inch Quadco 360 degree rotation head. 8.3 Cummins power rated at 280 HP. 24 inch pads. Undercarriage is at 80%. Inside is very nice as well as the outside. Preheater. Heat and AC. Teeth on head are at 95%. 2 speed transmission works as it should.

 Greenland, MI
 906-475-8582

 Call
2008 Ponsse Wisent  Forwarder
$129,000

Nice working forwarder. 100% woods ready. Previously owner operated machine. Super straight and clean inside and out. You would be very hard pressed to find a nicer forwarder for the year. Hours are 16,666. Recent work done and we have the receipts which come up to just under $11,000 dollars. Heat & A/C. Benz engine runs like a top. Hydrostatic tranny works excellent. Fire suppression. Pre Heater. Grill guard and frame lock. CD Player. Front tires are 600/65-34 in 50% or better condition. Rear tires are 600/55-26.5 in similar condition to the front. Seat is like new yet. Nothing to be afraid of here. New paint and decals.

 Greenland, MI
 906-475-8582

 Call
2015 Rottne F15C  Forwarder
$249,500

2015 Rottne F15C, one set of tracks, Tier 3 John Deere 6068 Engine, No def fluid!! 5,786 hours, Sure Grip Model 360 bucket, 3 speed Hydrostatic transmission, Heat, AC, Pre Heater, 710/45/26.5 rubber in excellent condition, Squirt boom, $249,500

 Greenland, MI
 906-475-8582

 Call
2006 Timbco 415EX  Harvesters and Processors
$89,000

2005 Timbco 415EX, Rolly II, 70% U/C. - REDUCED PRICE! Processor Manufacturer: RISLEY, Processor Model: ROLLY II

 Greenland, MI
 906-475-8582

 Call
2000 Timbco 425D  Feller Buncher
$79,500

Owner operated buncher. Clean inside and out. Newly rebuilt engine. 8.3 Cummins rated at 215 HP. Leveling cab. Good undercarriage. Heat and A/C. 13,804 hours. 33 inch Timbco barsaw head. Serial# AT4C-1886-120700. Nice straight machine and has been well cared for by same family business for many years. Excellent hydraulic power and final drives are good as well. We may take a trade depending on what you have. Please give us a call!!!! We can also assist with trucking if needed. New paint and decals. Thanks for looking! 24 inch wide pads.

 Greenland, MI
 906-475-8582

 Call
2000 Timberjack 608S  Harvesters and Processors
$59,500

Nice working machine here. Fully serviced and ready to go to the woods! New joystick circuit board. New upper rollers. Couple rebuilt cylinder on good working 762C John Deere processing head. Joystick controls. Timberjack 3000 computer. Parker Hydraulics. Extendaboom. Heat & A/C. 5.9 Cummins power. Runs excellent. Good Undercarriage. 22,412 total hours. This is good working processor! Strong Hydraulics.

 Greenland, MI
 906-475-8582

 Call
2004 Timberjack 1110D  Forwarder
$119,000

2004 Timberjack 1110D, re-man drive pump and drive motor, John Deere 6 cly. engine, 600 rubber 15500 hours

 Greenland, MI
 906-475-8582

 Call
2002 Timberjack 460D  Skidder
$39,500

Good working skidder. 6068 Deere engine runs excellent. Transmission shifts as it should. Good working winch. Heat and A/C. 2 sets of Bearpaw chains included with the sale. Dual function grapple. Good rubber. This machine came out of the woods working daily. Woods ready!!

 Greenland, MI
 906-475-8582

 Call
2006 Timberking TK340  Feller Buncher
$44,500

2006 Timberking TK-340, 6cly. Cat engine, 22" hotsaw head, joystick steering, 28Lx26, rubber @ 65-70%, ice cold A/C,hour meter reads 2500 hours

 Greenland, MI
 906-475-8582

 Call
2006 TimberPro TF810  Forwarder
$149,500

Very well maintained machine. Clean inside and out. 8.3 Cummins runs like a top. Rebuilt injection pump, new center section, new computer, new throttle assembly, and new charge pump. Rubber size is 700/50/26.5 and in good working condition. Roughly 40 to 50% on each tire. Pre heater. Hydrostatic drive. Heat and A/C. Sure grip controls. Ready to go to work. We do take trades depending on what you have. Please feel free to call us anytime. We can also assist with shipping and financing if needed. Thanks for looking! Just over 11,000 hours.

 Greenland, MI
 906-475-8582

 Call
2010 TimberPro TN725B  Harvesters and Processors
$139,500

Nice working processor. Well cared for. Clean inside and out. Heat & A/C. Excellent running 8.3 Cummins rated at 280 HP. 90% Undercarriage. Reversing fan. Leveling cab. Pre heater. 27.5 inch wide pads. Rolly II processing head that we are in the process of repinning and putting new bushings. Nice tight machine, ready to go to work! 15,671 hours. We do take trades depending on what you have and we can also assist with shipping if needed. Please feel free to give us a call!!. We're located in the Western U.P. Thanks for looking!!

 Greenland, MI
 906-475-8582

 Call
2005 TimberPro TB630  Harvesters and Processors
$119,500

2005 TimberPro TB630, Rolly II with topsaw, Cummins 8.3 engine, 750/55x26.5 rubber,tracks, 11,150 hours, nice clean machine

 Greenland, MI
 906-475-8582

 Call
2000 Valmet 840  Forwarder
$79,500

Nice working owner operated forwarder. Tires are all around 50%. Size is 700/45/26.5. Just a little over 14,000 original hours. Heat and A/C. Good working Espar preheater. 6 cylinder Sisu engine runs like a top. Now blow by. Quiet, durable, and very fuel efficient engine. Hydrostatic transmission shifts as it should. Rebuilt bogeys. We're located 70 miles North of Eagle River, WI and 70 miles N.E. of Hurley, WI. We may take a trade depending on what you have. Please feel free to give us a call. Center section is tight. Load is in good working condition as well. Ready to haul wood. We can assist with trucking if needed. Recently fully serviced and many new parts installed. Please call us for more information and thanks for looking!!

 Greenland, MI
 906-475-8582

 Call
2011 Valmet 911.4  Harvesters and Processors
$129,500

Nice working processor. Very clean inside and out. Serial number is 9110041470. Sisu Tier 3 engine runs like a top. 228 HP. Hydrostatic drive, works as it should. 710/55-34 Rubber on the rear at roughly 60%. Front rubber is 710/55-26.5 also at roughly 60%. Hours are 9,800. Heat and A/C. Preheater. We do take trades depending on what you have and we can also assist with shipping if needed. Please feel free to call us as well. Thanks for looking!!

 Greenland, MI
 906-475-8582

 Call
2009 Valmet 430FXL  Harvesters and Processors
$149,000

Very clean machine inside and out. Everything works as it should and it's ready to cut wood! 8.3 Cummins engine runs like a top. New paint and decals. Clean interior. Heater & A/C. Espar Preheater. 9,483 hours. Excellent undercarriage, roughly 80%. 24" Single grouser pads. Final drives and pumps are all strong. New implement pump at 5,000 hours. New drive motor at 7,100 hours. New Hydraulic pump at 7,700 hours. Rolly II processing head in good condition. We do take trades depending on what you have and we can assist with delivery if needed. Thanks for looking!!

 Greenland, MI
 906-475-8582

 Call
2012 Valmet 445FXL  Feller Buncher
$189,000

2012 Valmet 445FLX-1, Quadco 22" hotsaw,360 degree turn, 80% U/C, 8.3 Cummins engine, 7656 hours

 Greenland, MI
 906-475-8582

 Call
2000 Caterpillar 517  Skidder
$159,000

These are super rare and they do not make them anymore. Cat engine runs like a top. 3 speed transmission works excellent. 5,383 original hours. Undercarriage at 80%. Full forestry package. No heat or A/C. Can be added easily enough. Serial# 5WW00194. We can assist with delivery if needed. We do take trades depending on what you have..Feel free to call us as well.

 Greenland, MI
 906-475-8582

 Call
2009 Caterpillar 501  Harvesters and Processors
$119,500

Very nice working machine. Clean inside and out. 10,740 machine hours. Excellent undercarriage. 3056E Cat engine runs like a top. Rated at 161 HP. Heat & A/C. Reversing Fan. Fire suppression. Model PF-48 4 roller head works as it should. Good track power. All pumps are strong. Machine Serial# is PH00716. Head serial# is PH00718. Width is 8'6" and Height is 11'. We're located in the Western U.P. Please s feel free to call us. We can assist with delivery if needed and we do take trades depending on what you have. Thanks for looking!!

 Greenland, MI
 906-475-8582

 Call
2016 Caterpillar 564  Forwarder
$229,500

2016 CAT 564 5,600 hours, , set of tracks, exc. Rubber all around, Pre Heater, Heat /A/C, CB Radio, Cat power, Hydrostatic transmission, Sure Grip controls, Joystick steer, Super clean/1 owner, $229,500

 Greenland, MI
 906-475-8582

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved