• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
10 Results Found for Planer Viewing 1 - 10 of 10 results
RECENTLY ADDED
STANDARD LISTINGS
Extrema MXP-233 Roughing Planer, Double Surfacer, S/N 92005, 33” W x 8’ T, 50 HP Top Motor & 40 HP Bottom, Helical Carbide Tip Heads, Mounted Motor Controls, Exclusive Selling Agent "As Is Where Is"
Equipment Location:TX
Kittrell Sawmill Brokers and Appraisers
931-797-6284
25-1/2" x 8" cap., min. material length 16" and min. thickness 3/8"; max. depth of cut 1/2" each head; microprocessor controlled digital setup of part thickness. -- Equipped with: 50 HP Top & 40 HP bottom belt drive motors to STEALTH helical Spiral Cutterheads with (10) rows of carbide insert knives which rotate at 6,000 RPM. Cutterheads slide out of machine for easy knife replacement. -- Variable feed speed 30 - 117 FPM, powered by 5 HP gear & shaft drive with pneumatically controlled feed system to upper and lower sectional feed rolls. -- Infeed table is hard chrome plated & precision ground for maximum wear resistance. Powered raise & lower of bed table on (4) 8" dia. Heavy Duty columns via a 1 HP motor. -- Complete with: Electrical control & operator panel with motor load meters, central lubrication system, all manuals. -- NOTE: For 460-volt 3 phase operation add $300.
Equipment Location:SOUTH
Jeff Terrill
800-374-5009 ext:349
EXTREMA XP-124TV Planer, Single Sided;Specifications: -- Solid cast iron construction. -- 15 HP Main drive motor. -- 1 HP feed motor, 20 to 70 FPM. -- 1/2 HP Elevation motor.Equipped with: -- Precision ground cast iron table w/motorized programmable adjustment. -- Scale & pointer readout for accurate thickness adjustments. -- "VECTOR" insert cutterhead with 4-sided inserts. -- Fixed feed speed setting for consistent stock removal. -- Sectional steel infeed roller & segmented chipbreaker. -- Independently adjustable feed rollers. -- (2) Externally adjustable bed rollers. -- Hinged top for easy access to cutterhead & gear assembly. -- Self-braking motor. -- Magnetic starter & thermal overload switch and Emergency stop.Complete with: Operations manual, parts list & tool kit.
Equipment Location:SOUTHEAST
Ed Webb
800-374-5009 ext:377
Solid cast iron construction. -- 15 HP Main drive motor, 1 HP feed motor 20 to 70 FPM, 1/2 HP elevation motor. -- Precision ground cast iron table w/motorized programmable adjustment. -- Scale & pointer readout for accurate thickness adjustments. -- "VECTOR" insert cutterhead with (4) sided inserts. -- Fixed feed speed setting for consistent stock removal. -- Sectional steel infeed roller & segmented chipbreaker. -- Independently adjustable feed rollers. -- (2) Externally adjustable bed rollers. -- Hinged top for easy access to cutterhead & gear assembly. -- Self-braking motor. -- Magnetic starter & thermal overload switch. -- Emergency stop. -- Operations manual, parts list & tool kit. -- Options: Single-phase power, please add ...$ 100, 460 volt add...$ 150.
Equipment Location:SOUTH
Ed Webb
800-374-5009 ext:377
EXTREMA 126TV Single Sided Planer;26" Max. width capacity, 11.75" thickness, Solid cast iron construction. -- Precision ground cast iron table with motorized programmable height adjustment; 1/2 HP elevation motor. -- 20 HP Main drive motor -- Scale & pointer readout for accurate thickness adjustments. -- "VECTOR" cutterhead with (6) rows of 4-sided inserts. -- 1 HP Feed drive, variable feed speed setting from 20 to 75 FPM. -- Sectional steel infeed roller & segmented chipbreaker. -- Independently adjustable feed rollers; (2) Externally adjustable bed rollers. -- Hinged top for easy access to cutterhead & gear assembly. -- Self-braking motor with magnetic starter & thermal overload switch and Emergency stop. -- Includes Operations manual, parts list & tool kit.
Equipment Location:SOUTH
Ed Webb
800-374-5009 ext:377
16" x 7" cap., min. material length 12" and min. thickness 3/8"; 20 HP top and 10 HP bottom belt driven motors to "VECTOR" helical Spiral Cutterheads which rotate @ 6,000 RPM; (6) rows or spirals of 4-sided carbide inserts. -- Variable feed speed 20 - 75 FPM, powered by a 2 HP drive; infeed table is hard chrome plated and precision ground for maximum wear resistance. -- The specially designed top spike conveyor prevents pieces from jumping, even when workpieces are exceptionally narrow. The spikes are manufactured from high quality steel, heat treated and spring loaded for maximum life span. -- Powered lowering & raising of bed table on (4) columns via a 1/2 HP motor with synchronized transmission system. The transmission system is directly driven by flexible shafts for high accuracy; hand wheel for fine adjustment of thickness control. -- Complete with: VECTOR Spiral cutter heads (standard) and digital control for accurate thickness setting, side mounted electrical control & operator panel. -- NOTE: For 460-volt operation add $300.
Equipment Location:SOUTH
Jeff Terrill
800-374-5009 ext:349
25" x 8" cap., min. material length 12-1/2" and min. thickness 3/8"; 30 HP top and 20 HP bottom belt driven heads, MACH 6 helical spiral cutterheads 6,000 RPM with four sided carbide inserts. -- Variable feed speed 20 - 75 FPM, powered by a 3 HP drive; infeed table is hard chrome plated and precision ground for maximum wear resistance. Specially designed overhead spike conveyor, prevents pieces from jumping, even when workpieces are exceptionally narrow. The spikes are manufactured from high quality steel, heat treated and spring loaded for maximum durability. -- Powered lowering & raising of bed table on (4) columns via a 2 HP motor with synchronized transmission system. The transmission system is directly driven by flexible shafts for high accuracy; hand wheel for fine adjustment of thickness control. -- Complete with: Spiral cutterheads, digital control for accurate thickness setting, side mounted electrical control & operator panel. -- Optional: 4-Knife cutterheads. -- NOTE: For 460-volt operation add $300.
Equipment Location:SOUTH
Jeff Terrill
800-374-5009 ext:349
25" x 8" cap., min. material length 12-1/2" and min. thickness 3/8"; 30 HP top & 20 HP bottom belt drive motors to "STEALTH" helical Spiral Cutterheads which rotate @ 6,000 RPM; (6) rows or spirals of 4-sided carbide inserts. -- Variable feed speed 20 - 75 FPM, powered by a 3 HP drive to lower feed rolls and upper feed mat; infeed table is hard chrome plated for maximum wear resistance, relieving upper feed mat with spring loaded spikes, this allows cupped bowed or warped boards to feed into the heads for maximum straightebing capability. -- Powered lowering & raising of bed table on (4) columns via a 2 HP motor, hand wheel for fine adjustment of thickness control. -- Complete with: Spiral cutterheads, digital control for accurate thickness setting, side mounted electrical control & operator panel. -- NOTE: For 460-volt operation add $300.
Equipment Location:SOUTH
Jeff Terrill
800-374-5009 ext:349
Solid cast iron construction. -- Precision ground cast iron table chrome plated for maximium wear resistance. -- Powered lowering & raising of bed table on (4) columns via a 2 HP motor, hand wheel for fine adjustment of thickness control with LED Digital readout for accurate thickness adjustments. -- VECTOR sprial insert knife cutterhead. -- Variable feed speed setting 20 - 75 FPM for consistent stock removal. -- Relieving upper feed mat with spring loaded spikes, this allows cupped bowed or warped boards to feed into the heads for maximun straighting capability. -- Sectional steel infeed roller & segmented chipbreaker. -- Independently adjustable feed rollers. -- (2) Externally adjustable bed rollers. -- Hinged top for easy access to cutterhead & gear assembly. -- Self-braking cutterhead motors. -- Magnetic starter, thermal overload switch & emergency stop. -- Operations manual, parts list & tool kit. -- Options:460 volt add...$ 300.
Equipment Location:SOUTH
Jeff Terrill
800-374-5009 ext:349
EXTREMA XP-610 SINGLE SIDED PLANER24" Width capacity, 8-3/4" thickness, solid cast iron construction. -- 10 HP main drive motor -- Precision ground cast iron table w/motorized height adjustment, with digital thickness display; 1/2 HP elevation motor. -- Scale & pointer readout for accurate thickness adjustments. -- "VECTOR" cutterhead with (6) rows of 4-sided inserts. -- Variable feed speed from 20 to 42 FPM; 1 HP feed drive. -- Sectional steel infeed roller & segmented chipbreaker. -- Independently adjustable feed rollers. -- (2) Externally adjustable bed rollers. -- Hinged top for easy access to cutterhead & gear assembly. -- Self-braking motor with magnetic starter & thermal overload switch. -- Emergency stop. -- Operations manual, parts list & tool kit.
Equipment Location:SOUTHEAST
Ed Webb
800-374-5009 ext:377