• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
14 Results Found for Planer Viewing 1 - 14 of 14 results
RECENTLY ADDED
STANDARD LISTINGS

Newman 282 Planer

Call for Price
Newman 282 Planer
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Newman Belt Driven Planer 8K w/100HP Motor
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

2018 Newman EPR-18 Planer

Call for Price
18" x 6" Fixed Bed Double Planer. -- 6-knife cutterhead with 7" cutting circle and 20° cutting angle, complete with high speed steel knives. -- 40 HP 3600 RPM top head motor; 25 HP 3600 RPM bottom head motor. -- Feed works consists of four feed rolls: One top infeed roll and one top outfeed roll each consisting of three pneumatic tires mounted on steel shafts. Top roll yokes are pivoted from frame allowing for stock variation and quick roll raising. Bottom infeed quad rolls and single outfeed roll are idle. -- Variable feed speeds of 40-150 FPM. Top rolls are powered by two 10 HP helical gear motors and AC variable frequency drive. -- Sectional top head chipbreaker with 3" wide, hardened steel toe pieces. -- Air operated top head chipbreaker release. -- Manual pressure bar release. -- Grinding, setting, and jointing equipment furnished for top and bottom cutterheads. -- Cutterhead brakes. Dust hoods. -- Outfeed bottom roll equipped with roll scraper. -- Standard electrical control panel equipped with full-voltage starters and fuses for line protection. -- OPTIONS: & EXTRAS: -- For 230 volt current in lieu of 460 volt, add $1,920 -- For 575 volt current in lieu of 460 volt (for step down transformer for electric feed drive) - ADD $1,985 -- Automatic Cut Control for elimination of fixed bottom head cut, add $7,965 -- Anti-lap device (required for conveyor feed) add $1,655 -- Operator remote console (standard conduit length 25’) add $1,675 -- Air operated pressure bar release add $2,840 -- Top head power hoist add $2,700 -- Helical Carbide Cutterheads, 6-knife, includes grinder and jointer add $15,195 -- Infeed Conveyor: 16’ long x 18” wide belt conveyor (AC vari-drive), with electronic controller add $12,075 -- Infeed Conveyor: Same as above except 18’ long add $ 12,210 -- Infeed Conveyor: Same as above except 20’ long add 12,$420 -- Powered Pinch Roll, free standing, complete with two 12” diameter feed rolls - bottom roll is powered, top roll is idle add $11,325 -- Electronic controller (required when either infeed or outfeed conveyor is supplied by another vendor) - add each $ 1,560 -- Sound cover (machine must be equipped with air operated pressure bar release) add $13,845 -- To plane strip material add $4,595 -- Top head digital setworks add $3,220 -- NOTES: -- 1. The standard electrical controls specified above conform to the National Electrical Code. -- 2. For all special electrical requirements including other voltages and local codes apply to factory. -- 3. All motors are premium efficiency, totally enclosed fan cooled. -- 4. Price includes factory service technician for start-up assistance and operator training for a minimum of 8 hours, not to exceed 12 hours, on plant site. Note: Customer will be billed for travel and living expenses. (Failure to use factory start-up person will result in the voiding of all warranty of the machine.) -- 5. Prices shown are F.O.B. Browns
Equipment Location:SOUTHEAST
Jeff Terrill
800-374-5009 ext:349

2018 Newman EPR-24 Planer

Call for Price
--24 24" x 6" Fixed Bed Double Planer, 6-knife cutterheads with 7" cutting circle and 20° cutting angle, complete with high speed steel knives. -- 60 HP 3600 RPM top head motor; 50 HP 3600 RPM bottom head motor; 3 phase, 60 cycle, 460 volt. -- Feed works consists of four feed rolls: one top infeed roll and one top outfeed roll each consists of four pneumatic tires mounted on steel shafts. Top roll yokes are pivoted from frame allowing for stock variation and quick roll raising. Bottom infeed quad rolls and single outfeed roll are idle. Variable feed speeds of 50-350 FPM. Top rolls are powered by two 15 HP helical gear motors with AC variable frequency drive. Sectional top head chipbreaker with 3" wide hardened steel toe pieces. Air operated top head chipbreaker release. Manual pressure bar release. -- Includes: Grinding, setting, and jointing equipment furnished for top and bottom cutterheads. Cutterheads brakes. Dust hoods. Outfeed bottom roll equipped with roll scraper. Standard electrical control panel equipped with full-voltage starters and fuses for line protection. -- OPTIONS & EXTRAS: -- For 230 volt in lieu of 46O ADD $4,120 -- For 575 volt current in lieu of 460 (for step down transformer for electric feed drive) ADD $1,985 -- Automatic Cut Control for elimination of fixed bottom head cut add $8,490 -- Anti-lap device (required for conveyor feed) add $1,670 -- Operator remote console (standard conduit length 25’) add $1,675 -- Air operated pressure bar release add 2,870 -- Top head power hoist add $3,135 -- Helical Carbide Cutterheads, 8-knife, includes grinder and jointer. add $16,885 -- Infeed Conveyor: 16’ long x 24” wide belt conveyor (AC vari-drive), with electronic controller add $12,300 -- Infeed Conveyor: Same as above except 18’ long add $12,505 -- Infeed Conveyor:Same as above except 20’ long add $12,705 -- Powered Pinch Roll, free standing, complete with two 12” diameter feed rolls - bottom roll is powered, top roll is idle add $11,325.00 -- Electronic controller (required when either infeed or outfeed conveyor is supplied by another vendor) - Each $1,560 -- Sound cover (machine must be equipped with air operated pressure bar release) add 13,980 -- To plane strip material ADD $5,295 -- Top head digital setworks add $3,220.00 -- NOTES: -- 1. The standard electrical controls specified above conform to the National Electrical Code. -- 2. For all special electrical requirements including other voltages and local codes apply to factory. -- 3. All motors are premium efficiency, totally enclosed fan cooled. -- 4. Price includes factory service technician for start-up assistance and operator training for a minimum of 8 hours, not to exceed 12 hours, on plant site. Note: Customer will be billed for travel and living expenses. (Failure to use factory start-up person will result in the voiding of all warranty of the machine.) -- 5. Prices shown are F.O.B. Browns Summit, North
Equipment Location:SOUTHEAST
Jeff Terrill
800-374-5009 ext:349

Newman EPR-24 Planer

Call for Price
Newman EPR-24 Planer Helical Carbide Cutting Heads 60HP each Head up to 6" Thick.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
NEWMAN EPR 600 TOP & BOTTOM HEAD ROUGHING PLANER WITH 23.6" x 4" CAPACITY. -- QUIETCUT Helical Carbide Cutterhead 4-knife includes grinder and joint, or 4-knife cutterhead with 6" cutting circle and 20° cutting angle complete with high speed steel knives. -- Cutterhead Motors: 40 HP 3600 RPM top head motor; 25 HP 3600 RPM bottom head motor. -- Feed Works consist of four feed rolls: One top infeed roll and one top outfeed roll each consisting of four neoprene sectional rolls mounted on steel shafts. Top roll yokes are pivoted from frame allowing for stock variation and quick roll raising. Two bottom infeed rolls and two outfeed rolls are idle. -- Variable feed speeds of 30-150 FPM. Top rolls are powered by two 7-1/2 HP helical gear motors with AC variable frequency drive. -- Sectional top head chip-breaker with 3" wide, hardened steel toe pieces. -- Air operated top head chipbreaker and pressure bar release. -- Grinding, setting, and jointing equipment furnished for top and bottom cutterheads. -- Cutterhead brakes. -- Dust hoods. -- Standard electrical control panel equipped with full-voltage starters and fuses for line protection. -- OPTIONS: -- Top head power hoist, ADD $3,135 -- Infeed Conveyor: 16’ long x 24” wide belt conveyor (AC vari-drive), with electronic controller, ADD $12,300 -- Conveyor drive (required when either infeed or outfeed conveyor is supplied by another vendor) m:Price Each, $ 1,735.00 -- NOTES: -- Standard electrical controls specified above conform to the National Electrical Code. -- For all special electrical requirements including other voltages and local codes apply to factory. -- All motors are premium efficiency, totally enclosed fan cooled. -- Price includes factory service technician for start-up assistance and operator training for a minimum of 8 hours, not to exceed 12 hours, on plant site. Note: Customer will be billed for travel and living expenses. (Failure to use factory start-up person will result in the voiding of all warranty of the machine.) -- Prices shown are F.O.B. Browns Summit, North Carolina, and subject to change without notice. -- Terms: 30% deposit with the order; 30% at 60 days; 25% prior to shipment; 15% net 30 from date of shipment to approved accounts. -- Delivery as of April 2017, 14-16 weeks. -- After June 2017, contact Jeff Terrill @ Ext 349 for price & delivery verification.
Equipment Location:SOUTHEAST
Jeff Terrill
800-374-5009 ext:349

2018 Newman EQ3-18 Planer

Call for Price
18" x 6" Fixed Bed Equalizing Planer with (3) cutterheads. -- "Quietcut" helical carbide 6-knife cutterheads; 1st bottom head motor 25 HP - 3,600 RPM; top head motor 40 HP - 3,600 RPM; 2nd bottom head motor 25 HP - 3,600 RPM. -- Feed works: (1) Top infeed roll, (1) top mid-roll, and (1) top outfeed roll; each with (3) pneumatic tires mounted on steel shafts. -- Top rolls powered by 15 HP helical gear motors, AC variable frequency drive; top roll yokes pivoted from frame for stock variation and quick roll raising; bottom feed rolls are idle. -- Variable feed speed from 40 - 150 FPM; air tensioned rubber covered pressure roll over 1st bottom; A.C.C. (Automatic Cut Control) for both bottom cutterheads (eliminates fixed bottom head cuts). -- Sectional top head chipbreaker with 3" wide, hardened steel toe pieces; air operated top head chipbreaker release; top head power hoist; air operated pressure bar release; grinding and jointing equipment furnished for all cutterheads. -- Cutterhead brakes and dust hoods included; standard electrical control panel for 460 Volt current and equipped with full-voltage starters and fuses for line protection. -- Available Options (please call for pricing): 575 Volt current in lieu of 460 Volt (for step down transformer for electric feed drive); Anti-lap device (required for conveyor feed). -- Operator remote console (standard conduit length 25'); 20' long x 30" Infeed Wide Belt Conveyor (AC vari-drive), with electronic controller. -- Infeed Conveyor: Same as above except 18' long. -- Infeed Conveyor: Same as above except 16' long. -- Powered Pinch Roll, machine mounted, complete with (2) 12" dia. feed rolls (bottom roll is powered, top roll is idle), with electronic controller. -- Electronic controller (required when either Infeed or Outfeed Conveyor is supplied by another vendor).
Equipment Location:SOUTHEAST
Jeff Terrill
800-374-5009 ext:349
-Newman S282 Planer; Item #T10872; S/N-14655; w/Helical Quiet Cut Head; w/40 HP Motor on Top Head; w/25 HP on Bottom Head; w/15 HP Hyd Power Pack; w/Infeed & Outfeed Belt Conveyor; w/Motor Control; w/Starter for Planer; w/Parts & Sharpener; Contact Johnny Kimbel 865.617.6937 or James Savage 865.617.9122
Equipment Location:WV
Tri-State Auction & Realty, LLC
865-376-7009
NEWMAN EQ3-24 24" x 6" FIXED BED EQUALIZING PLANER (WITH 3 CUTTERHEADS -- Helical Carbide Cutterheads, 8-knife. -- Cutterhead motors: 50 HP 3600 RPM first bottom head motor; 60 HP 3600 RPM top head motor; 50 HP 3600 RPM second bottom head motor; 3 phase, 60 cycle, 460 volt. -- Feed works consist of: one top infeed roll, one top mid-roll, and one top outfeed roll each consists of four pneumatic tires mounted on steel shafts. Top rolls are powered by 15 HP helical gearmotors with AC variable frequency drive. Top roll yokes are pivoted from frame allowing for stock variation and quick roll raising. Bottom feed rolls are idle. -- Variable feed speeds of 50-350 FPM. -- Air tensioned rubber covered press roll over first bottom A.C.C. -- Automatic Cut Control for both bottom cutterheads (eliminates fixed bottom head cuts). -- Sectional top head chipbreaker with 3" wide, hardened steel toe pieces. -- Air operated top head chipbreaker release. -- Top head power hoist. -- Air operated pressure bar release. -- Anti-lap device -- Operator remote console (standard conduit length 25’) -- Grinding and jointing equipment furnished for all cutterheads. -- Cutterhead brakes included. -- Dust hoods included. -- Standard electrical control panel is for 460 volt current and equipped with full-voltage starters and fuses for line protection. -- OPTIONS: -- Helical Carbide Cutterhead, 10-knife in lieu of 8-knife, includes grinder and jointer, for top and second bottom cutterheads, ADD $3,215 -- Infeed Conveyor: 16’ long x 24” wide belt conveyor (AC vari-drive), with electronic controller, ADD $12,300 -- Powered Pinch Roll, machine mounted, complete with two 12” diameter feed rolls (bottom roll is powered, top roll is idle), with electronic controller, ADD $13,325 -- Electronic controller (required when either infeed or outfeed conveyor is supplied by another vendor) - Each, ADD $1,560 -- NOTES: The standard electrical controls specified above conform to the National Electrical Code. -- For all special electrical requirements including other voltages and local codes apply to factory. -- All motors are premium efficiency, totally enclosed fan cooled (per The Energy Policy Act of 1992). -- Price includes factory service technician for start-up assistance and operator training for a minimum of 8 hours, not to exceed 12 hours, on plant site. Note: Customer will be billed for travel and living expenses. (Failure to use factory start-up person will result in the voiding of all warranty of the machine.) -- Prices shown are F.O.B. Browns Summit, North Carolina, for acceptance within 60 days. -- Terms: 30% deposit with the order; 30% at 60 days; 25% prior to shipment; 15% net 30 from date of shipment to approved accounts. -- Delivery as of April 2017, 14-16 weeks. -- After June 2017, contact Jeff Terrill @ Ext 349 for price & delivery verification.
Equipment Location:SOUTHEAST
Jeff Terrill
800-374-5009 ext:349

Newman M 48 Planer

Call for Price
Newman M48 Serial# 11303
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Newman M510 Planer

Call for Price
NEWMAN M 510 PLANNER
Equipment Location:Yuma, TN
LPS Equipment & Acquisition Co.
731-986-4351
30" x 6" Coupled Drive Fixed Bed Electric Double Surfacer; 6-knife cutterhead with 7" cutting circle & 20° cutting angle, complete with high speed steel knives. -- 75 HP - 3,600 RPM Top head motor; 50 HP - 3,600 RPM bottom head motor. -- Feed works consists of (6) feed rolls: (2) Top infeed rolls & (1) top outfeed roll (all top rolls are pneumatic tires mounted on steel shafts); (3) steel ball bearing idle bottom rolls; improved hub-style feed shaft configuration. -- Variable feed speeds from 80 - 350 FPM; electric feed drive with (2) 15 HP AC vari-drives. -- Sectional top head chipbreaker with 3" wide, hardened steel toe pieces; air operated top head chipbreaker release; (1) wear strip for rear platen. -- Infeed table: Manual pressure bar release; chrome plated insert for front platen. -- Grinding, setting, & jointing equipment furnished for top & bottom cutterheads; cutterhead brakes; dust hoods. -- Standard electrical control panel, 460 V current, full-voltage starters and fuses for line protection. -- Options: 230 V Current in lieu of 460 V, please add ...$ 3,400; 575 V Current, add ...$ 1,640; Automatic cut control for elimination of fixed bottom head cut, add ,,,$ 7,310; Anti-lap device in lieu of infeed table (required for conveyor feed), add ...$ 1,970. -- Options: Operator remote console (standard conduit length 25'), please add ...$ 1,380; Air operated pressure bar release, add ...$ 2,365; Top head power hoist, add ...$ 2,865. -- Options: QUIETCUT Helical Carbide Cutterhead, 8-knife, includes grinder & Jointer, please add ...$ 15,200; Infeed conveyor: 20' Long x 30" wide belt conveyor (AC vari-drive), with electronic controller, add ...$ 8,800; infeed Conveyor: Same as above except 18' long, ...$ 8,600; Infeed Conveyor same as above except 16' long, add ...$ 8,500. -- Option: Powered Pinch Roll, free-standing, complete with (2) 12" dia. feed rolls (bottom roll is powered, top roll is idle), please add ... $ 7,950; Electronic controller (required when either infeed or outfeed conveyor is supplied by another vender), add ...$ 1,345 each. -- NOTE: All motors are premium efficiency, totally enclosed fan cooled. Price includes factory service technician for start-up assistance and operator training for a minimum of (8) hours, not to exceed (12) hours, on plant site. CUSTOMER WILL BE BILLED FOR TRAVEL & LIVING EXPENSES. (Failure to use factory start-up person will result in the voiding of all warranty of the machine.)
Equipment Location:SOUTHEAST
Jeff Terrill
800-374-5009 ext:349
Infeed deck Tilt hoist Infeed to planer Newman S-382-HD: 30" Wide x 6" thick, top and bottom planer with sound enclosure Top head positioning is manual Top head: 50HP Bottom head: 35HP Hydraulic drive: 15HP Feed Per Minute: 40FPM - 300FPM Controls included All dust pip included Live deck to rip saw Automatic infeed to rip saw Progressive Systems SB/D-31 Rip Line with 75 HP motor, lasers, extra arbor Outfeed conveyors that travel to chop line This system has been shut down for about 6-months. Buyer will be repsonsible for rigging and loading. CMS can help with quotes.
Equipment Location:TN
Carolina Machinery Sales, Inc
704-288-1904

Newman S-382-HD Planer

Call for Price
Newman S-382-HD Planer and Hydraulic Unit. Being completely redone by Newman at the moment Will be Like a Brand New one when done. Will be selling as a Package to include a Newman G280 Knife Grinder.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351