Equipment For Sale

WEIMA WLK 4 Vertical Hopper-Fed, Low-Noise GrinderSpecifications: -- 31-1/2" x 39" Hopper opening at the top, 1.1 cu. yds. cap. Features: -- 30 HP rotor motor, Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counter knife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. Equipped with: -- (14) Replaceable back bolt-on cutter knives, welded knife holders standard, recessed concave cutters with low clearance over the 10" dia. rotor extends cutter life, protects the bolts, and reduces machine wear. -- 6" Dia. dust collection outlet (1,200 CFM required); 3/8" - 2" interchangeable screens to produce chips from 1/2" to 2" (Output depending on screen size, material density, and moisture content); -- Hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, the lateral force on the ram is minimized by a unique "U-Joint" mounting system. Includes: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for an additional charge). Options: -- Flared hopper, log Spacer, 2nd row of knives, material discharge auger; programmable logic controls;

WEIMA - Woodchuck: Low Noise Slow Speed Vertical Wood Waste GrinderLow cost/investment solution for Woodwaste disposal - feasible for a small shop.Specifications -- 25 HP Main Drive motor; 24" x 41" hopper opening; 0.74 cu. yds cap; 10" dia. rotor, 100 RPM. -- Equipped with: -- (28) 40 mm x 40 mm Concave; indexable cutters; 6" discharge outlet. -- Features -- Patented V-ROTOR design utilizes tooling closely matched to grooves in the counter knife. -- V-ROTOR Produces: Uniform discharged material; free of splinters; dedicates more horsepower to grinding. -- Includes -- 5/8" or 3/4" Screen (TBD); integrated "plug-and-play" electrical control system with: UL Approved components. -- (5,454) Total operating hours.

WEIMA WLK 15 Vertical Hopper-fed Low Noise Grinder Specifications: -- Single shaft Shredder/Grinder, 59" x 59" rear-flared hopper opening; 3 cu. yds. cap.; 368 mm (14.5") rotor dia.; 120 HP motor; hydraulic ram with 4-sided serrated ram. -- Equipped with: -- Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters; reduce friction, and dedicate more horsepower to grinding. -- (82) Welded knives, (4) broaching cutters & (4) counter-knives, recessed concave cutters with low clearance over the rotor to extend cutter life, protect the bolts, and reduce machine wear. -- Features: -- Drop out discharge, hydraulically actuated lift up door for easy purge cleaning; extended screen basket; cut-out for conveyor (not included); false wall; 3/8" - 4" screen available. -- Hydraulic serrated ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system, Hydraulic clutch enables motor to start with the hopper full. -- Complete with: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge). -- Recommended for plastic, paper or wood applications.

Weima TH1500 Briquette Press

WEIMA ZM-40 Quad Shaft 4-Shaft ShredderEquipped with: -- Dual drive motors - (2) 30 HP Drive motors. -- Hopper opening measures 51" x 55.1" (1,300 x 1,400 mm); cutting chamber opening of 30" x 27.6" (762 x 700 mm). -- Rotor length of 30" (762 mm); Rotor speed 25 RPM; cutting disc 11" (280 mm) diameter. -- Complete with: -- Control Panel with soft start and 16' cable bundle. -- Note: "Quad Shaft" Shredders, unlike Dual Shaft Shredders, allow shredded material to be circulated through the cutting chamber until it is small enough to pass through the sizing screen. -- Machine weight: 5,500 Lbs.

WEIMA TIGER 600 Horizontal Slow Speed Grinder w/Vibratory ConveyorSpecifications: -- 6" High x 23.6" wide max. infeed opening, 50-60 HP rotor motor, 14" dia. rotor grinds at 620 RPM (fixed rotor speed depending on application). -- Equipped with: -- Patented "V-ROTOR" design utilizes a v-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. -- Features: -- (32) Replaceable back bolt-on cutter knives (welded knife holders standard, bolt-ons per customer request), recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. -- Infeed roller with replaceable wear strips for ease of maintenance, feed speed is controlled by monitoring the amp draw of the rotor, preventing "braking" or excessive pressure on the rotor, the vibratory infeed conveyor (12') is tied into the feed roll to eliminate binding. -- 9.85" (250 mm) Dia. dust collection outlet (3,000 CFM required). -- Includes: -- Heavy Duty low-profile frame (15-3/4" passline height); integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge); up to 16' vibratory infeed conveyor available.

WEIMA Grinder - 2004 Model WLK 13/75 Low Speed, Hopper Style Grinder. Batch style grinder with 75 HP low-speed rotor, top feed hopper, self-contained hydraulic system with hydraulic ram, and controls. Controls operate the ram, which forces material against the low-speed rotor. Controls vary the hydraulic pressure based on the load on the rotor motor. Features reversible carbide cutters on a large diameter rotor, a 2 cubic yard hopper with a 51 x 47 inch top opening. Weighs about 10,000 lbs. Serial 500-6283.

WEIMA WLK-6 Vertical Hopper-Fed Low-Noise Waste GrinderEquipped with: -- 31-1/2" x 49" hopper opening at the top, 1.2 cu. yds. cap.; (3) sides straight with curved Front Wall. -- 30 HP rotor motor, 10" dia. Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counterknife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. -- 31-1/2" Long rotor operates at 80 - 120 RPM; equipped with (42) replaceable back bolt-on (4 x indexable) concave shaped cutter knives. -- Welded knife holders standard; recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. -- Features: -- WEIMA's proprietary gearbox designed specifically for slow speed grinders. -- 8" Dia. outlet for material discharge via auger, conveyor, or pneumatic (1,900 CFM required required for pneumatic conveying); choice of 3/8" - 2" interchangeable screens to produce chips from 1/2" to 2" (Output depending on screen size, material density, and moisture content). -- Hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system. -- Complete with: -- Heavy Duty structural steel frame, welded construction; integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge). -- Material output from 1,000 - 1,250 Lbs/Hr (output is an average and can be influenced by density, material size, screen size, feeding form, and other); 1" standard screen hole size. -- Includes: -- A/B Programmable Logic Controller. -- Options: -- Flared hopper, material discharge auger.

WEIMA TIGER 400 Horizontal Slow Speed Single Shaft Wood Grinder w/Vibratory ConveyorSpecifications: -- 6" High (160 mm) x 15-11/16" (400 mm) wide max. infeed opening, 50 HP rotor motor, 14" dia. rotor grinds at 620 RPM (fixed rotor speed depending on application). -- Equipped with: -- Patented "V-ROTOR" design utilizes a v-groove rotor closely matched to grooves in the counter-knife to ensure uniform discharge free of splinters, reduce friction, and dedicate more horsepower to grinding. -- Features: -- (22) Replaceable back bolt-on cutter knives (welded knife holders standard, bolt-ons per customer request), recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear. -- Infeed roller with replaceable wear strips for ease of maintenance, feed speed is controlled by monitoring the amp draw of the rotor, preventing "braking" or excessive pressure on the rotor, the vibratory infeed conveyor (12'), is also tied into the feed roll to eliminate binding. -- 9.85" (250 mm) Dia. dust collection outlet (3,000 CFM required). -- Includes: -- Heavy Duty low-profile frame (15-3/4" passline height); integrated "plug-and-play" electrical control system with UL approved components (system UL certification available upon request for additional charge); up to 16' vibratory infeed conveyor available.

WEIMA TH 814 Briquetter A volume reduction of 90% is possible through the briquetting of wood, paper, aluminum and biomass or synthetics, providing significant savings in labor, disposal and storage costs.Material is hand fed or by dust system into the hopper, where an agitator pulls it into the auger and pressing chamber. Specifications: -- Produces 80 mm (approx. 3.1") dia. compacted logs; approx. 2.4 cu. yd. (55.1 x 55.1 x 37") square vertical hopper, 18 HP motor. -- Hydraulic ram compacts the material in the extrusion chamber to produce uniform material, extrusion chamber is continually filled via rotary screw type auger. -- Volume reduction from chip/dust to block up to 10:1 ratio; approx. hourly output between 300 - 400 Lbs/Hr.Features: -- Auto on/off integrated into feeding hopper; automatic briquette length adjustment; conical-shaped agitator; dust connection at pressing unit.Options: -- Hydraulic cooling for 24-hour operation, heating for cold weather start-ups; plastic tubing discharge into Gaylord or carousel bagging system. .

2020 Weima WLH 600 Grinder 50 HP motor Vibrating Infeed

2008 Weima WL 6/18.5 V-Rotor Drop Feed Wood Grinder Machine number 500-8876 460V 3 Phase 60 Hz Motor Output- main drive 18.5 KW 1760 rpm Motor Output- hydraulic system 1.5/2.0 KW 21 tools Rotor speed ca.90 Rotor diameter 252 mm Includes spare rotor

Weinig Unimat 22AL Electrical Panel

Good Condition 230V 60Hz

WEINIG - POWERMAT 1000 Feed Through Moulder Package with "R-960" Grinder and "POCMS" Stand 6-Head (B-R-L-T-B-U); working cap. 9-1/16" x 4-3/4".Head sequence: Bottom 10 HP; right 15 HP; left 15 HP; top 25 HP; bottom 20 HP; universal 10 HP motor. - ALL motors with electronic brakes. WEINIG Touchscreen "Power Com" software system features: Profile drawing storage; profile dimensions; tool changes; production optimization. Electronic LED readouts for: All toolholder settings including: Chip breakers & pressure elements.Spindle Configuration Spindle #1: 1-13/16" With cutterhead speed of 8,000 RPM; Power-Lock tool holders: #2 - #5 With cutterhead speed of 12,000 RPM & toolholder #6: Variable speed 4,000 - 12,000 RPM. Adjustment of vertical tools 2-3/16" axially. Motorized tool positioning radial & axial on toolholders #2 - #5; motorized feed beam adjustment with independent adjustment of top head; top head with independent adjustment of chip breaker & pressure element. Variable feed speed from: 20 - 120 FPM; 10 HP inverter controlled Cardan feed drive; overhead feed wheels with pneumatic pressure. Vertical tools with: Adjustable table plates to cutting circles; hardened infeed bed plates before & after 1st bottom head. Equipped with: Chromed tables & fences; (2) powered table rollers in bed; (1) between bottom & universal spindles; (1) at outfeed. Infeed straightening table: 2 M (6-1/2').Central location of lubrication points; electromagnetic interlocking of safety hood; automatic table lubrication pump; (2) lights inside reinforced sound enclosure & phone modem. This machine included (60) various size Heads & Measuring Stand with PowerCom computer.

1st Head – Bottom– 40mm spindle – 11kw 8,000 RPM • Electronic digital display for radial adjustment Marathon Coating Table plates 2nd Head – Right – 40mm Spindle – 11kw 8,000 RPM 3rd Head – Left – Powerlock Spindle – 15kw 8,000 RPM Pressure shoe in front of left tool holder, incl. 2 lateral Pressure rollers, pneumatic. Vario hood (2 axes) Central adjustment of the pressure and guide elements before and after Left tool holder incl. electronic digital display. 4th Head – Right – Powerlock – 11kw 8000 RPM 5th Head – Top – Powerlock – 15kw 8000 RPM Vario hood (2 axes) Central adjustment of the pressure and guide elements before and after Upper tool holder incl. electronic digital display Split pressure shoe in front of upper tool holder, pneumatic Oscillating axial adjustment 6th Head – Top – Powerlock – 11kw 8000 RPM Vario hood (2 axes) Central adjustment of the pressure and guide elements before and after Upper tool holder incl. electronic digital display Split pressure shoe in front of upper tool holder, pneumatic Oscillating axial adjustment 7th Head – Bottom – Powerlock – 11kw 8000 RPM 8th Head – Right – Powerlock – 11kw 8000 RPM An additional pressure roller from above opposite 3rd right Tool holder, swing away for easy Tool change, pneumatic 9th Head – Left – Powerlock – 11kw 8000 RPM Vario hood (2 axes) Central adjustment of the pressure and guide elements before and after left Tool holder incl. Electronic digital display. Frequency controlled feed, 11 KW (6-36m/min 5 meter in-feed table Automatic lubrication pump Two driven rollers in the machine table, hardened Pressure rollers from above, pneumatic PowerCom Plus Software CNC controlled adjustment and positioning. Axial CNC – controlled adjustment and positioning of the Tool holders in connection with the Memory function or PowerCom. For tool holder no. • 2,3,4,5,6,7 Radial CNC – controlled adjustment and positioning of the Tool holders in conjunction with the memory function or PowerCom. For tool holder No. 3,4,5,6,7 CNC – controlled adjustment and positioning of the feed Automatic central lubrication of the oscillating Tool holders Two interior lights in the safety hood Comes with new Transformer.

WEINIG Profi Joint Short Stock Finger JointerThe ProfiJoint model is a flexible finger jointing line which is used for processing timber packages and manufacturing horizontal as well as vertical finger joints. -- This model is perfect for first-time buyers and can be modified to accommodate a shaper combination if need be. -- The ProfiJoint Eagle is easy to operate, has a compact design, and provides you with the same high-quality product you expect from the Weinig brand. High-capacity shaper and shaper table (19"; wide) carrying the packaged timber pieces to finger joint them either horizontally or vertically. -- Shaping unit includes axial adjustment providing 1/100mm of precision for the finger length. -- Scoring units (optional) for horizontal jointing and to avoid any tear-out. Technical Specifications: -- Utilizing the FlankenJet Glue System, only the exact amount of glue needed is automatically applied.GRECON Flanken-JetA Flanken jet is a system developed by GreCon for glue spreading in finger-jointing plants.Until the introduction of Flankenjet, glue spreading through ridged glue rollers used to be common. The biggest disadvantage of such system is a perpetual glue circulation.With Flankenjet a targeted glue dosage via slotted nozzles takes place. This way the glue spreading can be controlled and only takes place when the workpiece has absolutely passed the system.Advantages:Order quantity can be simply adjusted and variegated in a relatively big area.constant properties of the glue, because it can be in a closed system until the actual orderlow adhesive wastagedeployment possible by PUR glue. -- Single worker operation typical. -- Infeed Length: 5-7/8" - 27-1/2" -- Material Thickness: 7/8" - 1-15/16" -- Material Width: 1-9/16" - 5-7/8" -- Outfeed Press Length: 118" - 240" -- Saw Motor: 15kW (20HP) -- Hogger & Scoring Motor: 5.5kW (7.37HP)

1998 Weinig Moulder H23 MDL Hydromat 23. Call for pricing.

WEINIG - P-22 Feed Through Moulder5-Head WEING Molder with a working cap. 9-1/16" x 4-3/4".Head Sequence -- Bottom: 10 HP; Right/left:10 HP; top: 15 HP; Bottom: 10 HP motor. -- Spindle dia. 1-1/2" with: Cutterhead speed of 6,000 RPM; mechanical spindle brakes all spindles. -- Mechanical digital readouts on all spindles; Digiset readouts on left & top spindles; mechanical readouts on chipbreaker & pressure elements of top spindles.Feed -- Controlled feed speed from: 16 - 78 FPM; 5-1/2 HP feed drive. -- Infeed straightening table: 2 M (6-1/2"); fences, side holdover roller mounted to infeed table; manual Waxilit pump.Features: Reduced distance feed roller; protection against backlash when splitting; central location of lubrication points; sound/safety enclosure. -- Comes with: Large assortments of cutterheads, 9" - 2"; approx. (30); includes lots of different knives for each of the heads.