sawmill Equipment For Sale
.gif)
3589 Results Found
.jpg?width=220&height=170&mode=crop)
.jpeg?width=220&height=170&mode=crop)
Call for Price
Complete mill that needs to be removed from the current location. Seller will not split up the operation. (2) Infeed Decks: - (2) 3-Strand Infeed Deck 24' Long - H82 Chain - 3-7/16" Shaft - (2) 10 HP Drives - 3-Strand infeed deck 60' Long Cut Off Saw: - 54" Saw - 20 HP Motor - Hourglass rollers - Hydraulic length stops - Diverter gate to debarker Debarker - Infeed Deck - Cambio 24" Debarker - 75 HP Main motor Scragg: - 5-strand Infeed, 20' Long - Copper Scragg: 30 HP Hydraulic package, variable speed cable feed works with pantograph arm, log positioning, 48" saws with 125 HP motors, (2) 18" 2-position slab conveyors, cab, 8'-16' length capacity, max log 22", largest cant 12"x12" - Outfeed sorting system to two edgers: 5-Stand lower deck, 4-strand hydraulic lift to gang edger Gang & Board Edger: - 10" Mainland Gang Edger: 200 HP Motor, 34" inserted tooth saws with 5/16" kerf - 6" x 50" Mainland Board Edger: 150 HP motor, 24" blades, self tailing outfeed conveyor Trim Saw: - 2-Saw Trimmer with outfeed Greenchain: - Camel Back Landing Transfer - 4-Strand x 26' Long - 4-Strand: 8'4" Decline transfer - 4-Strand 66' Greenchain
$ 180,000
2010 USED Cooper end dogging scragg mill. 6' to 16' length and up to 24" diameter log capacity. Includes: Operator's cab with joystick controls, COOPER scanning, computer controls, 150hp arbors, linear bearings for shifting saw husks, 56" inserted tooth blades, off bearing drop belts, hydraulic system,3-way separator outfeed roll case, electrical panel WITH starters. Spare parts included. Still running and can be seen until February 28.
Call for Price
Cor-Dus Custom Belted Live Rolls 12" x 12.5' With Motor and Drive.
Call for Price
Cor Dus 12" x 5' Belt conveyor
Call for Price
New in the crate - Ready to ship! The ICON class dust system from Coral comes in 1-5 bag systems ranging from 1,400-3,800 CFM. - Easy installation! - Plug & Play setup - 3-10 HP Available!
Call for Price
In stock and ready to ship! ICON Pro Series from Coral - Integrated Fan - Easy installation - Plug and play! - 2900-3500 CFM - 5.5-7.5 HP
Brand new System - IN STOCK! Coral FM 10 Ready Dust System 5,000 RPM 10 HP 230 or 480 V
Call for Price
Corinth 36" 3 Head Block Carriage, Track,Cab, Control, T-Berry 214 Drive, Mellott #5 Log Turner & Meadows 2 Saw Vertical Edger.
Call for Price
100 HP 3 Phase Motor Helle Log Turner Infeed Table Outfeed Table 25HP Chip Blower
Call for Price
Corley 848 Combo Gang Edger with 250HP Electric Motor With Infeed.
Call for Price
Corley 8" x 48" Gang S/N E848-002
Call for Price
Corley gang edger, 8" capacity, includes infeed/outfeed, electric drive, THIS UNIT NEEDS TO BE REBUILT, CALL FOR OPTIONS!!
Call for Price
Corley 8" Single Arbor Combo Gang Edger, We can Motor it or you can. No Infeed Rollers
Call for Price
848C Corley 8x48 Gang Edger 150 HP motor Pneumatic Kicker and transfer chain that feeds it. Off bearing chain conveyor (54) Strobe blades that go with the saw and over (100) spacers of different sizes that go with it. Toshiba soft start
Call for Price
17' x 8" x 24" Live Screw Roll Case
Call for Price
Corley Chipping Scragg Mill, Model CSM006, s/n 3778, 12x12" capacity, 26" over/under, mfg date 7-18-85, Paw Taw John setworks, 4- 26" blades, 2 key knife chipping heads with face knives, 2 saw lines, 2-50 hp Out and Ready to Ship
$ 18,000
CORLEY 8" GANG-EDGER. Infeed rolls; split top press rolls, solid bottom feed rolls; 300 HP motor and drive, NO outfeed. $18,000 OBO.
Call for Price
Corley Combo Gang Edger Single Arbor with (2) 75HP electric Motors, Serial# EH-648-023, Very Nice Rollers.
Call for Price
14 Corley Edger Saw Blades
Call for Price
Corley 8" Combination Edger, model E848002, s/n 800550, mfg date 4-23-1979, set up with 4 stationary blades. 2 motors: 300 hp Westinghouse Life-Line T Electric motor 1775rpm, 460v, 449 T frame and 125hp Toshiba World Energy Star Electric motor 3-phase induction motor 1770rpm, 444T frame