Equipment For Sale

COE 249D Veneer Lathe with the following: -- 27" maximum log diameter, Approx.110" knife length. -- 1484 Veneer Lathe Big Bar. -- 1390 Veneer Lathe Core drive. -- 3 to 1 inner drive ratio. -- Capable of peeling approx. 35 cubic meters per hour. -- Includes: • Linden step feeder• Small log offset x-y spindle chucks• 27"; maximum log diameter• 1484 big bar• 3 to 1 inner drive ratio• Digital ball feed carriage drive -- Note: Sold without 'charger or drive' included. -- This COE Veneer lathe line was completely rebuilt and installed in 2006. The lathe was operated less than one year and is reportedly in very good condition.

Coe 47' x 26' Package type dry Kiln with Controls, 1989 Hurst gas boiler 150 PSI, 6900# Steam Per Hour S/N 51000-750-3, Condensate Tank & Pumps & Electrical. can Buy as a Package or Seperate the Hurst Boiler.

Coen 230 Combustion Wood/LP Gas Fired Burner

144L X 120"D X 144"H (25) Filter Screens (4) 12" X 48", (4) 4-tube light panels(1) Exhaust Fan 1HP 120V

Comac TAG 100 Package Kiln 30'x36' Gas fired with control room Looks like 70 MBF with 4/4 lumber

Photos coming Compact DDM6 Profile Canter Line Double Length Infeed Production: 27,000 Logs/ 24 hours, 360 FPM (2x6), 500 FPM 2x4 Infeed belt conveyor V flight scanning conveyor without the scanner and optimization system One pass small log processor Outfeed belt conveyor #1 Outfeed lifting belt conveyor #2 Outfeed belt conveyor #3 Lumber landing table Motor Control Centers (MCC) Programmable Logic Controller (PLC) - obsolete

Denis 948 Gang Saw

MLS Number 11922341 Denis Comact 948 Gang Saw Edger 6" infeed table Spare guides

ComacT Edger, 2-Saw Movable, All Motors - $32,000 - Call Jeff for more info at 574-370-5050

COMEC - FAS/2, ...Corner Milling MachineCOMEC FAS is a dedicated milling machine with: Inclinable heads for machining the corner of chair seats. Specifications: -- (2) Heads with: 5.5 HP motor and 40 mm spindle shaft. -- Max. cutter size: 150 mm (5.9"). -- Tilting of milling units: 20°/ +45° in horizontal plane. -- Fixed left hand column to support head unit. -- Max. working height: 200 mm (7.8").

COMEC - LON-LS, ...Horizontal Belt SanderSpecial design for sanding of straight or curved solid wood parts such as: Chair legs, chair backs and other similar & difficult-to-sand parts.10 HP Belt driven motor; 12" dia. contact drum for 10" wide x approx. 140" long abrasive belt; air tracking & belt tensioning. -- Stock is fed over the contact drum with an overhead variable speed, pneumatically tensioned feed wheel. -- Sander belt power: 6.6 kW (9 HP approx.) - 220/440 V, 60-Cy, 3-Ph motor.

COMEVA - G-300, ...4-Axes CNC Controlled Door Frame/Jamb Milling Machine: Designed for cutting and milling the stiles and rails (headers) of door frames/jambs using a saw blade which rotates from +/- 45° & 90° straight cuts (rabbet-step cuts) and a router head for the milling pockets of all types of hinges and locks. --Specifications: Max. frame length of 118.1" (3,000 mm); max. frame thickness of 1.18" (30 mm); max. frame width of 9.84" (250 mm). Saw cut positions at +45°, 90°, -45°. Saw blade diameter of 11.81" - 12.28" (300 - 314 mm).Milling Group: Cutting and milling with (4) axes, X, Y, Z, & A , each with Servo motors controlled by CNC. Components from reputable manufacturers for guaranteed reliability, performance and quality. 1.5 kW - 18,000 RPM Router motor and 4kW - 5,640 RPM saw motor. X-Axis reaches a speed up to 290 FPM (90 MPM)COMEVA Software: -- Specially developed COMEVA DOORS software allows the machining of the main designs of hinges and slots you may find all over the market, including the machining on the upper side/edge of the door. Software carries a series of predesigned macros that help the operator when performing the different operations, thus speeding up various job design. Software carries out a special program of parametric macros for doors/door frames. This software is normally installed in user's own PC.NC Control: NC Controls for X, Y, Z & A-axis for tool positioning & processing. Axis movement via hardened round ways & ground ball screws. Advanced NC control powered by OSAI which is set up to control the (4) Interpolated axes. Comes with a PC with 19" display.Rails//Workholding: (4) Sliding rail units with (4) pneumatic fixturing clamps (aluminum and plastic) that can be moved for all frame sizes. (2) Side pistons put both frame stiles and the head rail in the correct position before starting the cycle. -- Includes: Owner’s Manual with mechanical & electrical schematics and parts breakdown; covered by a 1-Year Factory Warranty on parts. -- Overall machine dimensions: 134" x 99" x 63" high (3,400 x 25 mm x 1,600 mm) -- Engineered & Manufactured by COMEVA S.L, in Spain.

COMEVA - VECTOR DOOR ZENIT, ...CNC Door Machining Center with Automatic Tool ChangerFlexible Door CNC Machining Center can machine Hinges, Locks, Grooves, Door Face Patterns, and many similar applications. A device to allow machining of door jambs on the same machine is included. -- MACHINE COMPOSITION: - Max. Door size: 3,000 x 1,300 x 60 mm - Tool magazine: 6-Position Tool Magazine - Control: CNC ESSA - Drivers: YASKAWA Servo Motors - Inverter: DELTA - Software: COMEVA DOORS - X-Axis speed: 50 MPM - Y-Axis speed: 50 MPM- Z-Axis speed: 10 MPM - Positioning system: Rack & Pinion with reducer - Working code: Language ISO code G - Alum. bars w/ vacuum cups: (2) BARS + (8) vacuum cups - Lubrication System: Automatic -Vacuum type: VENTURI Vacuum Pump - Voltage: 400 V, 50/60 Hz, 3-Phase - Machine dimensions: 4,500 x 3,200 x 2,400 mm - Transport dimensions: 4,200 x 2,230 x 2,400 mm. -- Optional: - Extra vacuum cups: $US 165.- Light Barrier & perimeter fencing (required for Canada/US): $US 3,465. -- Includes: Owner’s Manual with schematics; covered by a 1-Year Factory Warranty on parts (Electrical components normally carry 90 days - 6 months warranty). --Engineered & Manufactured by COMEVA S.L, in Spain.

COMEVA - CUBE 3, ...Edgebander (Single Phase)The CUBE 3 from COMEVA is designed to be a very compact "every day" Edgebander. The CUBE 3 Edgebander is operated through a PLC control system with a touchscreen. The machine handles panel thicknesses of 0.315" up to 1.77" (8 mm to 45 mm), The coil feed accepts Edgebanding from 0.4 mm to 2 mm thick; strip material can be hand-fed.Equipped with: -- Heated infeed fence for optimum glue penetration. Large capacity Teflon coated glue pot (2.64 Lbs). -- Single motor End Trimming station -- Top & Bottom Trimming -- Top and bottom Buffing. -- Feed speed is variable between 9.8 & 23 FPM (3 - 7 MPM); feed chain pads with replaceable rubberized surface inserts. -- Rubberized holddown rollers with ball bearings for low friction and long life. Work stations: -- Pneumatically operated guillotine for up to 2 mm thick banding, followed by spring loaded double pressure rollers. -- Single front/rear trimming unit, 0.3 HP motor. -- Top & Bottom trimming units, (2) 0.5 HP motors. -- Top & Bottom buffing station, (2) 0.16 HP motors. -- Complete with: Safety enclosure protects the operator from noise and debris. Engineered & Manufactured by COMEVA S.L, in Spain.Includes: Owner’s Manual with mechanical & electrical schematics and parts breakdown; covered by a 1-Year Factory Warranty on parts.

COMEVA C-600 TOP CNC Door Milling Machine with (7) Axes and Rotary style (ATC) Automatic Tool Changer. The faster and more versatile version of the COMEVA NICRON DOOR models which can perform two jobs simultaneously on the door, ie. mill the hinges and machining the lock at the same time.Milling all types of hinges, including security locks and the recess for the bezel, the longitudinal recess for safety lock, front holes for knob handle, lock, digital locks, peepholes, machined holes or windows (stained glass), and floating probe. Operations performed in minimal time via two separate working channels. Will machine the top and bottom, resize, and bevel doors. Also available with optional loading and unloading of doors. -- Construction: Heavy duty Bridge configuration with two drives, one on end of the Gantry which ensures maximum reliability in the movement of the machine without any oscillation at minimum clearances. Top quality component brands for all linear guides, bearings, brushless servo and reducer. -- General Specifications: Maximum door length 118.1" (3,000 mm). Maximum door width 51.18" (1,300 mm); Minimum door width 15.75" (400 mm). Max door thickness 3.15" (80 mm). Gantry movement, the X axis, max. speed is up to 230 FPM (70 m/Min). Machine features (7) interpolated axes with (2) channels that work independently. -- Horizontal Heads - Hinge & Lock Milling: (2) high frequency motors at 2 HP (1.5KW) on the left and right side. -- Horizontal heads - Top and Bottom of doors: Top/bottom of doors is achieved with one 3 HP (2.2 KW) double-end head which swivels 180°. -- Vertical Milling Router: HSD Motor with ISO 30 ATC of 12 HP (9 KW) for routing hole for handle, crank, standard lock, security lock, electronic locks for hotels/commercial doors; milling or grooving work on the upper side of the door, with upper sensor for automatic measurement.The main milling router with variable speed from 1,000 to 24,000 RPM from the CNC programmable. Ceramic bearings are installed and it has right-left turn. The 10-position ATC is a the Rotary style mounted on the vertical head. -- Vertical Floating Motor: Vertical group also has a floating milling motor head for machining lines or groves top face of the door. Motor is 0.5 HP (0.37 KW). -- Vacuum Unit: BECKER vacuum producer at 100 m³/Hr. -- Production capacity: C-600 max. productivity can be less than one minute per door. Machine has an automatic calibration and automatic detection system of the door, plus roller guides to help load the door.The horizontal working groups on both sides (hinge and lock) work simultaneously allowing time for milling standard doors below (1) minute, approximately. -- Numerical Control/CAD Software: Advanced numerical control type S500 ETX 800 LX AMD PC (or equal) for the control of its (7) interpolated axes. It comes with a 19" display screen. The included COMEVA DOOR software is a special purpose package designed to facilitate the machining of all door ele

COMEVA C-400 B Programmable European Door Milling Machine: Specifications: -- Maximum door length, X-Axis 96" (2,440 mm). Maximum machining length from center to center of the farthest slots is 74.8" (1900 mm) based on a 120 mm hinge length. -- Working field Y-Axis 23.6" - 39.3" (600- 1,000 mm) min/max door width. -- Working field "Z" axis 1.18" - 2.36" (30 - 60 mm) min/max door thickness. Positioning: -- NC Controlled working table for X-, Y- & Z-axis part positioning & processing. X- Y- & Z- Axis movement via hardened round ways & ground ball screws.Work Table: -- (2) NC Controlled extruded aluminum support rails with (6) Non-Marking manually positioned pneumatic panel clamps. -- (1) NC Controlled extruded aluminum support table for "Hinge Plate" router spindles. Machining: -- (4) Manually adjusted 0.5 HP (0.37 kW), 12,000 RPM air-cooled "Hinge Plate" router spindles with ERC 32 collets, RH rotation. -- (1) NC Controlled 3 HP (2.2 kW) air-cooled 12,000 RPM horizontal "Case Lock" router spindles with ERC 32 collets, RH rotation. -- (2) NC Controlled 2 HP (1.5 kW) air-cooled 12,000 RPM vertical "Hardware" router spindles with ERC 32 collets, RH rotation.Operator & Machine Control: -- Separate control console with "ADTECH CNC 4640" Controller with numerical and function keyboard; -- Monitor displays programming graphics, machine data & subroutines, runs production programs while programming and editing -- Programming storage for 30 individual programs. -- Includes: Owner’s Manual with mechanical & electrical schematics. -- Engineered & Manufactured by COMEVA S.L, in Spain.

COMEVA - C-400 B Programmable, ...European Door Milling Machine: Specifications: -- Max. door length X-Axis 96" (2,440 mm); max. machining length from center-to-center of the farthest slots is 74.8" (1,900 mm) based on a 120 mm hinge length. -- Working field Y-Axis 23.6" - 39.3" (600 - 1,000 mm) min/max. door width. -- Working field "Z-axis" 1.18" - 2.36" (30 - 60 mm) min/max. door thickness. Positioning: -- NC Controlled working table for X-, Y- & Z-axis part positioning & processing; X- Y- & Z-Axis movement via hardened round ways & ground ball screws.Worktable: -- (2) NC Controlled extruded aluminum support rails with (6) Non-Marking manually positioned pneumatic panel clamps. -- (1) NC Controlled extruded aluminum support table for "Hinge Plate" router spindles. Machining: -- (4) Manually adjusted 0.5 HP (0.37 kW), 12,000 RPM air cooled "Hinge Plate" router spindles with ERC 32 collets, RH rotation. -- (1) NC Controlled 3 HP (2.2 kW) air cooled 12,000 RPM horizontal "Case Lock" router spindles with ERC 32 collets, RH rotation. -- (2) NC Controlled 2 HP (1.5 kW) air cooled 12,000 RPM vertical "Hardware" router spindles with ERC 32 collets, RH rotation.Operator & Machine Control: -- Separate control console with: "ADTECH CNC 4640" Controllers touch screen control with numerical and function keyboard. -- Monitor displays programming graphics, machine data & subroutines; runs production programs while programming and editing. -- Programming storage for (30) individual programs. -- Includes: Owner’s Manual with mechanical & electrical schematics and parts breakdown; covered by a 1-Year Factory Warranty on parts.Available Options at additional cost (when ordered with machine from the factory): -- Additional 0.5 HP (0.37 kW), 12,000 RPM air-cooled "Hinge Plate" router spindles with ERC 32 collets at ...$ 1,976.00 each. -- Engineered & Manufactured by COMEVA S.L, in Spain.

COMEVA - NICRON DOOR PRO, ...CNC Door/Jamb Machining Center with Automatic Tool ChangerGantry style flexible Door CNC Machining Center which can machine Hinges, Locks, Grooves, Door Face Patterns and many similar applications. The advantage of this machine over the NICRON DOOR C is this model can also resize the doors and its ability to machine the top/bottom of doors with the 90° rotation feature. It also has a floating head for grooving designs on the door faces while compensating for uneven door surfaces. Specifications: -- Max. working area - door length on X-Axis is 118.1" (3,000 mm). Max. X-axis speed of 230 FPM (70 MPM). -- Max. door width on Y-Axis is 51.18" (1,300 mm). Max. Y-axis speed of 230 FPM (70 MPM). -- Max. travel on Z-Axis is 7.87" (200 mm). Max Z-axis speed of 98 FPM (30 MPM).Working Heads: -- The machine is equipped with: (1) 9 kW Vertical router head with a 5-position Automatic Tool Changer (ATC); (1) 3.5 kW Horizontal head with double-end output spindles and 0° - 90° rotation; (1) 3.5 kW Horizontal motor for the lock milling, and a 0.37 kW floating head motor for grooving patterns on the door face. All drives are powered by Servo motors, X- & Y-Axis movement are via Rack & Pinion; Z-movement is with a recirculating ball-shaft.Working table: -- Table work area is 51.1" x 118.1" (1,300 x 3,000 mm). Table equipped with: (2) Adjustable width bars and (6) suction cups Load wheels, regulated by (5) reference pistons that rise & fall to secure the workpieces. The bars have integral suction cups powered by a VENTURI vacuum system. To work with doors, the machine is equipped with stops and gaskets for securing the door. Stops are mobile, and they can be used to hold doors and other parts.Operator Control Panel/CNC: -- Floor-standing operator panel is mounted on casters and houses the PC & OSAI CNC control hardware. PC motherboard is an ''INTEL Atom" 1.6 GHz CPU, modular system that offers a solution for the control of Servo drives and distributed input/output modules in a digital field bus and integrated II/O's. The dual-axes gantry has a Velocity-Feed-Forward function (VFF) that tries to look ahead with 256 precalculated blocks. It also incorporates a firmness control (Jerk) of the axes through advanced algorithms as well as tool store management & tool life. Advanced NC control powered by OSAI which is set up to control the Interpolated axes and all machine functions.COMEVA Software: Specially developed COMEVA DOORS software allows the machining of the main designs of hinges and slots you may find all over the market, including the machining on the upper side/edge of the door. Software carries a series of predesigned macros that help the operator when performing the different operations, thus speeding up various job designs. The software carries out a special program of parametric macros for doors/door frames.Includes: -- Centralized machine lubrication system. Owner’s Manual with schematics software on USB

COMEVA NICRON ZENIT CNC Door Machining Center with ATC.Simple, robust, fast, and versatile CNC that can meet all your needs milling, drilling, trimming etc. passage and entry doors. Equipped with a Router milling motor, "Type D" drill head, and a Double End horizontal milling motor to work on edges of all types of doors.Machine Specifications. Head Composition: -- Milling Router with Tool Changer capability; Boring head with (6) independent vertical spindles, (3) in X-Axis and (3) Y-Axis; (2) horizontal double drill spindles in X-Axis: --(1) Double-End horizontal Router Head. The Double-End spindle has one of the outputs with a cutter for machining the hinges and the second output has cutter for milling of the lock and plate.Work Table: -- Rexilon Nesting type flat table slotted for vacuum distribution and with (12) pneumatic reference stops; -- Tool changer with six position tool rack on one side of table; -- (4) Independent vacuum zones; Working area is 2,600 x 1,300 x 200 mm (102" x 51" x 7.8").Control & Software: -- Mobile CNC control panel for all axes control c/w display, keyboard and mouse. -- Powerful OSAI controller for machining control on all axes, reference stops, vacuum zones, and working groups; -- CADCAM Software is UCAMAM V11 (standard version) with postprocessor (which translates to language of machine) drawings from images such as BMP, JPG, TIF, GIF, PNG, as well as vector files from any format Adobe Illustrator, DXF (AutoCAD), EPS, PLT, TXT. Draw with this software directly and has auto-nesting to optimize use of the material.Drives & Speeds: -- ATC Router is 9 kW, 18,000 RPM with DELTA Inverter. -- Horizontal double end unit is 2.2 KW, 12,000 RPM. -- X & Y-Axes Speeds are 10 m/Min (30 m/Min with safety barrier - faster speeds available); Z-Axis is 10 m/Min. Other Machine Composition. -- Piston Stops: (12) divided into (4) fields. -- Lineal Guides: H/Win 20 mm wide. -- Lubrication System: Central - manual. -- Vacuum Pump: 160 cbm/Hr. -- Standard machine voltage: 400 V, 50-60 Hz, 3-Ph. (Transformers available). -- Overall Dimensions & Weight: 3,300 x 2,150 x 2,100 mm (130" x 85" x 83"); Weight: 2,000 kG (4,400 Lbs).Optional: - Vacuum Cup Risers. - CE regulation (Light barrier and perimeter fencing ): ...$ 2,950.(included in price) -- Includes: Owner’s Manual with schematics; covered by a 1-Year Factory Warranty on parts (Electrical components normally carry 90 - six months warranty).Engineered & Manufactured by COMEVA S.L, in Spain.Stated machine price includes Software and Light Barrier and Safety Fencing.

COMEVA - C-250, ...Programmable Door Milling Machine Specifications: -- Working field "X-axis" 90.55" (2,300 mm) max. door length. -- Working field "Y-axis" 23.6" - 39.3" (600 - 1,000 mm) min/max. door width. -- Working field "Z-axis" 1.18" - 2.36" (30 - 60 mm) min/max. door thickness. -- Positioning:NC Controlled working table for "X", "Y", and "Z" part positioning & processing."X", "Y", and "Z" Axis movement via hardened round ways & ground ball screws. -- Worktables:(2) NC Controlled extruded aluminum support rails with: (4) Non-marking manually positioned pneumatic panel clamps.(1) NC Controlled extruded aluminum support table for "Hinge Plate" router spindles -- Machining: (4) NC Controlled 0.5 HP (0.37 kW), 12,000 RPM air cooled "Hinge Plate" router spindles with: ERC 32 Collets & manual spacing adjustment, RH rotation.(1) NC Controlled 3 HP (2.2 kW) air-cooled 12,000 RPM horizontal "Case Lock" router spindles with ERC 32 collets, RH rotation.(1) NC Controlled 2 HP (1.5 kW) air-cooled 12,000 RPM vertical "Hardware" router spindles with ERC 32 collets, RH rotation. -- Operator & Machine Control: Separate control console with: "DELTA" 12" TFT touch screen control with numerical and function keyboard;Monitor displays programming graphics, machine data & subroutines, runs production programs while programming, and editing.Programming storage for (30) individual programs. -- Complete with: 1-Year Mfg. Warranty, User's operator/maintenance manuals & backup disks. -- Available Options at additional cost:Additional 0.5 HP (0.37 kW), 12,000 RPM air-cooled "Hinge Plate" router spindles with ERC 32 collets = $ 1,976.00 each.Additional 2 HP (1.5 kW) air-cooled 12,000 RPM vertical "Hardware" router spindles with ERC 32 collets = $ 3,240.00 each.Actual Model is COMEVA - C-250, ...CNC DOOR MILLING MACHINEIncludes: Owner’s Manual with mechanical & electrical schematics and parts breakdown; covered by a 1-Year Factory Warranty on parts.