Equipment For Sale

Capacities: 11” minimum length 98” maximum length 1” minimum width 32” maximum width 5/8” minimum thickness 3” maximum thickness with a conversed glue spreader(model 30J)

MLS Number 13417095 2016 Taylor TN520S Forklift 12794 hours 52,000 pounds capacity 75,330 chassis weight 60" forks 164" lowered height 106" max fork height Pneumatic tires 90% Diesel

MLS Number 13438557 2016 Taylor TN520S Forklift 21253 hours 52,000 pounds capacity 74,400 pounds chassis weight 60" forks 164" lowered height 106" max fork height Drive tires 80% Steer tires 95%

2016 Taylor TN520S Pneumatic Tire Forklift with 21,253 on a diesel Engine. Overhead Guard, enclosed cab and sideshifter. Fork Length 60", Lowered Ht. 164", Max lift 106". Drive tires have 80% tread remaining, Steer tires have 95% tread remaining. Small leak in Hydraulic valve. Length: 22 ft 0 in Width: 10 ft 9 in Height: 12 ft 2 in Weight: 74,400 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Taylor TN520S Pneumatic Tire Forklift with 12,794 hours on a diesel engine. Overhead Guard, and enclosed cab. Fork Length 60" Lowered Ht. 164", Max Ht. 106". Tires have 90% tread remaining. Small leak @ oil pan gasket and Hydraulic pump seal. Weight 74,400 lb Length 22 ft. Width 10.9 ft. Height 12.2 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Taylor THC-400L Cushion Tire Forklift with 6,891 hours on a diesel engine. Overhead guard, enclosed cab, and Side-shifting Fork Positioner. Fork length 60" Lowered Ht. 116", Max Ht. 76, Free lift 78". 100 % tread remaining on tires. Weight 57,200 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

MLS Number 13019231 2018 Taylor X330S Forklift 8991 hours 33,000 pounds capacity 48,600 chassis weight 114" forks 132" lowered height 236" max height Tires 100% SS/FP

MLS Number 13438554 2019 Taylor XH-350L Forklift 18529 hours 28,400 pounds capacity 57,040 chassis weight 102" forks 180" Max fork height Sideshifter, fork positioner Dual pneumatic tires Drive 100% Steer 50% 4 hydraulic functions

MLS Number 13438556 2019 Taylor XH-350L Forklift 17014 hours 30,200 pounds capacity 57,040 chassis weight 102" forks 172" lowered height 180" max fork height Dual pneumatic tires 95% Sideshifter, fork position

Taylor Forklift, runs & works good

TAYLOR 40 Section Clamp Carrier.Specifications: -- 40-Section, 8-1/2' width capacity -- Average 4/5 clamps per section (175 clamps total), all with 32" max. clamp opening. -- Equipped with (175) clamps plus a pallet of spares that require repair, 32" clamps with 2-1/2" high jaws .Complete with: -- Heavy Duty Drive for rotation,& clamp tightening. -- Foot pedal control. -- Includes a glue applicator.

Taylor Forklift tight machine

1968 Taylor Cable Skidder 453 Detroit New Front Tires, 90% Rears Bear Claw Chains Front and Rear At 75% Runs and Operates Good

TAYLOR 6 Section Pneumatic Clamp Carrier6-Section x 10-1/2' width cap.; (36 clamps total), 30" opening on clamps, 3-1/2" high jaws; with pneumatic rotation, tightening, and panel flattening. -- Overall assembled dimensions: 9' 6" deep x 13' 6" wide x 9' tall.Tear down not included

TB Woods 150HP Soft Start

10 HP 575 volt unit. Has between 25-27 CFM. RPM: 1745

Tregarne Wood Welder New in Box

TEREX ATLAS 1604 K ZW Wheeled Excavator w/ Grapple and MagnetSpecifications: -- 120 HP Diesel Engine -- 7.5 kW generator.Equipped with: -- Grapple -- Magnet -- Just replaced the solenoids fuel injectors and the exhaust valve. Hours: approx. 3,500

175 hp, Cummins, 6 cylinder,diesel, 9' bucket, 20.5 R25 tires

2014 Terex TBG 640 Horzontal Grinder with 210 original hours. NEEDS ENGINE it was a Cat C18. The mill takes Morbark 1300 hammers and tips, pumps are there, 210 original hours on the machine. Weight 82,000 lbs Length 43' Width 8' 3" Height 13' 3" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.