Equipment For Sale

2016 Morbark 4600XL Horzontal Track Grinder, Cat C27 with 7,500 hours, Magnetic Head Pulley, Radio Remote. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Morbark 4600xl Horizontal Grinder, Cat 1050hp, 6952 hours, Radio Remote, Magnetic Head Pulley. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Morbark 4600XL Track Horizontal Grinder, Cat 1050hp 8003 hours, Pt tech clutch, Radio Remote, Magnetic Head Pulley. Weight 88,640 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Morbark 4600XL Track Horizontal Grinder, Cat 1050hp 8003 hours, Pt tech clutch, Radio Remote, Magnetic Head Pulley. Weight 88,640 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Morbark 6400XT Track Horizontal Grinder C32 Cat diesel with 1890 hours, Cat platinum warranty 5 years or 8000 hours. 42" x 61 3/8" Hammermill System w/ 28" diamter rotor and 1" thick rotor plates 40" diameter feed roll Dust Suppression System Hydraulically operated debris containment door Rod Puller 325L GD CAT undercarriage with double grouser pads, Ready to Grind… Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2001 Morbark Wolverine -John Deere engine -20 inch shear head -2 speed hydrostatic -Hydraulic system strong -28-26 Firestone tires at 40 percent tread with chains -Strong running machine

48" 6 knife chipper in good condition, Precision chip shaker overall good condition, but main center bearing needs minor attention, A 17' vibrating conveyor in good condition. Buy as a set or split out.

Michigan (Morbark) Knife Grinder 4x4

Rebuilt 48" 6 Knife Horiz Feed, Top discharge in stock- set for 7/8" chip - price shown is with exchange

MORBARK 4600XL Portable Drum Chipper - Good used machine. Can be used as a hog/grinder or a chipper. Presently set up as a chipper.

2018 Morbark Model 4600XL Track Horizontal Grinder, Engine is a Caterpillar C-27 1050 HP Engine. Has 2,400 Hours of Running Time and 1,000 Hours Idling time, Undercarriage is 95%, Wireless Remote Control, Air Compressor, Metal Pully on Discharge Conveyor, Various Screen Sizes Ready to Work. Gross weight: 88,640 lbs. Length: 45” Height: 11’11” Width: 11’3” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

MORBIDELLI AUTHOR 503 FT CUSTOM CNC MACHINING CENTER (W/ATC): -- Specifications:4' x 8' Custom Stationary Extruded Aluminum Table for "Nested Base" manufacturing;Working cap. "X" axis is 125.2" (3,180 mm), "Y" axis is 41.3" (1,050 mm) for routing "Z" axis stroke is 5.7" (144 mm); max. material thickness is 3.1" (80 mm) -- Positioning speed:"X " & "Y" axis is 213 FPM. (65 MPM), "Z" axis is 82 FPM (25 MPM). -- Work Table: 4' x 8' Custom Stationary Extruded Aluminum Table for "Nested Base" manufacturing;(2) pneumatic side stops, (2) working areas -- Machining Units:(1) 10 HP (7.5 kW) Vertically mounted electro-spindle router with ISO-30 adapter, LH & RH rotation, inverter driven from 12,000 - 18,000 RPM,(1) 5-position ATC tool rack mounted on the LH side for automatic tool change, -- Operator & Machine Control:Separate control cabinet with Morbidelli "TRIA 7500" CNC Multi-processor, VGA monitor, ergonomic keypad, 3-1/2" disk drive, and (2) serial ports RS-232 & RS-242.Offers incredible list of functions from (a) auto-diagnostic to (z) zooming; -- Complete with: Voltage stabilizer 208. 230, 460 V, 60 Hz, 3 Phase Auto Transformer (1) 100 m³/Hr vacuum pump. -- Actual model is MORBIDELLI AUTHOR 503 FT CUSTOM

MORBIDELLI AUTHOR 504 R CNC MACHINING CENTER (W/ATC/BORING): -- Specifications: Working Cap. "X" Axis 139-3/8" (3,540 mm); "Y" axis 48-3/8" (1,230 mm) for routing & 39.6" (1,008 mm) for boring; "Z" axis 3.1" (80 mm). -- Positioning Speed:"X" Axis 213 FPM; "Y" axis 131 FPM; "Z" axis is 65 FPM. -- Worktable:(8) Adjustable panel supports each with: (3) Vacuum pods; worktable setup for (2) independent working areas. -- Boring Unit:(29) Independent vertical boring spindles forming a T-configuration with: (15) Spindles on the "X" axis and (14) spindles on the "Y" axis.A total of (8) horizontal spindles with: (3 + 3) on "X" Axis; (1 + 1) on "Y" axis. -- Machining:(1) 9 HP (7 kW) Vertically mounted router; inverter driven (FUJI) at 12,000 - 18,000 RPM.(1) 8-Position ATC for Automatic Tool Changer. -- Operator & Machine Control:"NUM CN" Loaded onto a HP, PC Based Controller mounted in separate control cabinet.15" VGA Color monitor and ergonomic keypad. Remote Control Pendant: Allows the operator to move around and still control all the axis movements, speed, and emergency stop.Includes: USB Ports; (2) serial ports RS-232 & RS-242 (requires no 3rd party CAD system for downloading programs). XILOG-PLUS OPERATOR Interface: Offers incredible list of: Functions from (a) Auto. diagnostic to (z) zooming; controlled acceleration & deceleration, encoder feedback, dynamic tool correction via PLC due to active tool wear using space-and-time criteria; programs can be transferred via diskette or downloaded by wire. Equipped with: Onboard mini-CAD with built-in programming for writing circles, ellipses & angles with only a few keystrokes; on-board cycle optimization, on-board calculator, mirror imaging, and repeat imaging. -- Complete with:(1) 100 cbm/Hr Vacuum Pump. -- Actual model is: MORBIDELLI - Author 504 .

MORBIDELLI AUTHOR 330 FLAT TABLE MACHINE (ATC & BORING) -- Specifications4' x 10' Stationary extruded aluminum "MATRIX" table for "Nested Base" manufacturing. -- Work Area:"X" Axis is 113.85" (2,892 mm); "Y" axis 50.78" (1,290 mm); "Z" axis stroke is 11" (280 mm); max material thickness 4.7" (120 mm). -- NOTE: When using the "Rake System," "4' x 8' is the max. panel size. -- Positioning Speed"X" Axis 262 FPM (80 MPM); "Y" axis 148 FPM (45 MPM); "Z" axis 74 FPM (22.5 MPM). -- Closed loop AC Servo drive system with: Recirculating ground ball screw in the "X", "Y" & "Z" axes; all axes ride on precision prism linear guideways. -- WorktableAluminum grid "MATRIX" vacuum table machined with a square grid pattern for fixturing parts; grid pattern allows use of vacuum pods or closed cell rope gasket material and use of spoil boards. -- (2) Independent working areas; external pop-up reference pins located on the sides & back of the table for positioning parts. -- Boring Unit2 HP (1.5 kW) - 4,000 RPM motor; (12) independent vertical boring spindles: (7) Spindles in "X" axis & (5) spindles in "Y" axis. -- Machining (1) 10 HP (7.5 kW) "Power 2000" Electrospindle w/lifetime lubrication and HSK F63 adaptor; spindle speeds from 900 - 18,000 RPM. -- (1) 12-Position "Rapid-12" traveling ATC tool plate for "on the fly" ATC. -- Operator InterfacePC Front-End with: NUM 1040 + Xilog III + Windows Operating System. -- 12" High resolution CRT, ergonomic keypad; 1.44 MB & CD ROM disk drives; (2) serial ports: RS-232 & RS-242. -- All housed in air-conditioned cabinet with: KELVIN Air conditioner. -- Complete with:(2) 300 cbm/Hr Vacuum pumps; emergency stop rope; Safety "Bump-Stop" system; Handheld pendant control. -- Options IncludedNesting Rake & off feed table to increase machine/Operator output -- "SOUTHWORTH" Lift Table; roller conveyor section to bridge safety barrier. -- (1) 10 HP (7.5 kW), 460 V, 3 Cy DUSTEK 3-bag Dust Collector. -- Actual model: MORBIDELLI - AUTHOR 330 NBR

MORBIDELLI AUTHOR 636 FLAT TABLE MACHINE (W/ATC/RAKE): -- Specifications:5' x 12' Stationary extruded aluminum "MATRIX" table for "Nested Base" manufacturing. -- Work Area:"X" Axis 144" (3,660 mm); "Y" axis 57.8" (1,470 mm) for routing & 48" (1,230 mm) for boring; "Z" axis stroke 11" (280 mm); max. material thickness is 7" (180 mm). -- Positioning Speeds:"X" & "Y" Axes 262 FPM (80 MPM); "Z" axis 74 FPM (22.5 MPM).Closed loop AC Servo drive system with: Recirculating ground ball screw in the "X", "Y" & "Z" axis; all axes ride on precision prism linear guideways. -- Worktable:Aluminum grid "MATRIX" vacuum table machined with: Square grid pattern for fixturing parts;, grid pattern allows use of vacuum pods or closed cell rope gasket material and use of spoil boards.(2) Independent working areas; external pop-up reference ins located on the sides & back of the table for positioning parts. -- Boring Unit:3 HP (2.2 kW) - dual speed 4,500 & 6,000 RPM motor; (12) vertical spindles with: (7) spindles in "X" axis & (5) spindles in "Y" axis.(6) Horizontal spindles with (2 + 2) in "X" axis & (1 + 1) in "Y" axis. -- Machining:(1) 15 HP (11 kW) "Power 2000" Electro-spindle w/lifetime lubrication and HSK F63 adaptor; spindle speeds from 900 - 18,000 RPM.(1) 12-position "Rapid-12" traveling ATC tool plate for "on the fly" ATC. -- Operator & Machine Control:PC Front End with: NUM 1040 + Xilog III + Windows Operating System.Includes: 12" High resolution CRT, ergonomic keypad, 1.44 MB & CD ROM disk drives, (2) serial ports RS-232 & RS-242. All housed in air-conditioned cabinet with a KELVIN air conditioner. -- Complete with:(2) 250 cbm BECKER "VTLF 250" Vacuum pump with: Emergency stop rope, handheld pendant control. -- Options Include:Nesting Rake: Off feed table to increase machine/operator output; (1) 208/230/460 Volt transformer. -- Actual model - MORBIDELLI AUTHOR 636 S.

MORBIDELLI AUTHOR M400 FR FLAT TABLE MACHINE(W/LOADING/RAKE/OFFLOADING): -- Specifications:5' x 12' Stationary extruded aluminum "MATRIX" table for "Nested Base" manufacturing with "Rake" and "Automatic Off-Loading Conveyor".Loading/working/processing direction is from LH (facing to RH (facing). -- Work Area:"X" Axis 143.7" (3,650 mm), "Y" axis 62.9" (1,600 mm), "Z" axis stroke 11" (280 mm), max material thickness is 6.69" (170 mm). -- Positioning Speeds:"X" & "Y" Axis 279 FPM (85 MPM), "Z" axis 98 FPM (30 MPM).Closed loop AC servo drive system with Precision Rack/Pinion in "X" axis & recirculating ground ball screw in the "Y" & "Z" axis.All axes ride on precision prism linear guideways. -- Work Table:5' x 12' Aluminum grid "MATRIX" vacuum table machined with a square grid pattern for fixturing parts, grid pattern allows use of vacuum pods or closed cell rope gasket material and use of spoil boards.(9) Independent, NC controlled working zone areas; external pop-up reference pins located on the sides & back of the table for positioning parts. -- Boring Unit "F37L2":3 HP (2.2 kW) - variable speed up to 7,000 RPM motor; F37L2 Boring Block with (24) Vertical spindles with (10) independent vertical spindles in "X" axis & (14) spindles in "Y" axis.The 10-spindle "X" axis boring unit is NC controlled with a 11.5" (293 mm) "Y" adjustable spread from its home position & independently controlled according to the drilling pattern being performed, this feature is IDEAL for high-speed line hole drilling.(12) Horizontal spindles with (4+4) in "X" axis on the programmable Independently NC controlled 10-spindle vertical boring unit, & (2+2) on the 14-spindle boring unit in "Y" axis. (1) NC controlled 0° - 90° "X" / "Y" Grooving Saw for max. 120 mm dia. blade. -- Machining:(1) 16.5 HP (12 kW) "Power 2000" Electro spindle w/lifetime lubrication and HSK F63 adaptor, NC controlled spindle speeds from 900 - 18,000 RPM.(1) 16-position "Rapid-16 traveling ATC tool plate for "on the fly" ATC NC Touch-off Probe for automatic Tool Length setting. -- Operator & Machine Control,PC Front End with XILOG PLUS + Windows "7" operating system. 17" high resolution LCD flat screen; ergonomic keypad.USB Ports, serial ports RS-232 & RS-242 & Ethernet adaptor.Programs can be transferred via USB or downloading by wire is possible; all computer components are mounted on a mobile stand. -- "XILOG Plus" offers incredible list of functions from: (a) Auto-diagnostic to (z) zooming; controlled acceleration & deceleration; encoder feedback; dynamic tool correction via PLC due to active tool wear using space-and-time criteria. -- Additionally equipped with: Onboard mini-CAD with built-in programming for writing circles, ellipses, & angles with only a few keystrokes.Onboard cycle optimization; onboard calculator; mirror-imaging and repeat imaging; all electronics mounted in an air conditioned, dust-free environment control cabinet. -- Complete with:(3) 300 m³/Hr "BECKER" Vacuum pumps;

MORBIDELLI U 550 CNC MACHINING CENTER (W/ATC/BORING): -- Specifications: Worktable area "X" axis 126" (3,200 mm); "Y" axis 51" (1,300 mm),;"Z" axis stroke 4.52" (115 mm); max. material thickness 3.1" (80 mm). -- Positioning Speed:"X" & "Y" Axes are192 FPM (58 MPM); "Z" axis 80 FPM (24 MPM). -- Worktable:(8) Adjustable panel supports with (3) vacuum pods per support.(8) Pneumatic backstops, (2) pneumatic side stops & (2) pneumatic center stops; (2) independent work zones. -- Boring Unit:(1) 4 HP (3 kW) - 4,000 RPM Motor; (29) independent vertical spindles at 32 mm centers with (14) vertical spindles in "X" axis & (15) vertical spindles in "Y" axis.(6) Horizontal spindles with (3 + 3) in the "X" axis. -- Machining:(2) 9 HP (6.7 kW) Routers with: ISO 30 Adaptors; variable speed from 12,000 - 18,000 RPM.(1) 5-Position tool racks mounted on the LH side of the machine base for ATC. -- Operator & Machine Control:Separate control cabinet with: "TRIA 7500" CNC 32-Bit multiprocessor (100% MS/DOS compatible), 512 KB user RAM.14" VGA Color monitor; ergonomic extended keypad with (18) function keys; 1.44 MB floppy disk drive & (2) RS 232 & (1) RS 242 serial ports. -- Complete with:(1) 100 cbm/Hr Vacuum Pump; working head safety enclosure; emergency stop rope. -- Actual Model is: MORBIDELLI - U 550.

MORBIDELLI U 550 CNC MACHINING CENTER (W/ATC/BORING): -- Specifications: Worktable area: "X" Axis 126" (3,200 mm); "Y" axis 51" (1,300 mm); "Z" axis stroke 4.52" (115 mm); max. material thickness 3.1" (80 mm). -- Positioning Speed:"X" & "Y" Axis are 192 FPM (58 MPM); "Z" axis 80 FPM (24 MPM). -- Worktable:(8) Adjustable panel supports with (3) vacuum pods per support.(8) Pneumatic backstops; (2) pneumatic side stops & (2) pneumatic center stops; (2) independent work zones. -- Boring Unit:(1) 4 HP (3 kW) - 4,000 RPM Motor; (29) independent vertical spindles at 32 mm centers with: (14) Vertical spindles in "X" axis & (15) vertical spindles in "Y" axis.(6) Horizontal spindles with (3 + 3) in the "X" axis. -- Machining:(2) 9 HP (6.7 kW) Routers with: ISO 30 Adaptors; variable speed from 12,000 - 18,000 RPM.(1) 5-Position tool rack mounted on the LH side of the machine base for ATC. -- Operator & Machine Control:Separate control cabinet with: "TRIA 7500" CNC 32-Bit multiprocessor (100% MS/DOS compatible); 512 KB user RAM,14" VGA Color monitor; ergonomic extended keypad with (18) function keys; 1.44 MB floppy disk drive & (2) RS 232 & (1) RS 242 serial ports. -- Complete with:(1) 100 cbm/Hr Vacuum Pump; working head safety enclosure; emergency stop rope. -- Actual Model is: MORBIDELLI - U 550.

Morbidelli Uniflex HP CNC Center

ux200 Axes Panel length (max.) mm 3200 Panel width (max.) mm 1300 Panel thickness (max.) mm 80 Panel weight (max.) kg 100 X-Y-Z axes speed (max.) m/min 120- 35- 30 Drilling head (std.) V Vertical spindles no.31+31 rpm up to 6000 48+48 Horizontal spindles no. 8(X)/4(Y) rpm up to 6000 16(X)/4(Y) Integrated blade in X axis Ø mm 125 rpm 7500 Electrospindle (opt.) Power (S6) kW (Hp) 9,5 (13) Max. speed rpm 24000 Available tools no. 6+6