Equipment For Sale

New Bandit 2290 Tracked Whole Tree Chipper, In Stock for Sale or Rental.

2013 Bandit 2290 Track Chipper with 5,700 Hours, Deere 600 HP Turbo Engine, Caterpillar 325 Undercarriage, Infeed System 5-1/2' Wireless Remote System, Enclosed Cab with Heat and AC, Electronic Controls updated by Bandit, Pumps updated to a larger pump, 2nd Owner. Ready for the woods. Weight:40,000 - 46,000 lbs Length:21 feet Width:10 feet 2 inches Height:11 feet 6 inches Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 Bandit 2290 Track Whole Tree Chipper, 6,000 Hours, John Deere 350 HP Engine, 7 sets of extra knives, Babbit Included, Enclosed Cab with Heat and no AC, Rotobec Grapple, Undercarriage is 75%, Cat Infeed Chain 5-1/2 Foot long, Ready for the Woods. Length: 21’ Width: 10’ 2” Height: 11’ 6” Weight: 40,000 - 46,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Bandit 2290 Track Whole Tree Chipper, Equipped with a Deere 600 HP, No DEF, Pro Heat, Infeed Chain, Wireless Remote, 314 Undercarriage is 85-90%, Reversing Fan, PT Tech Clutch, 2400 Original Hours, Ready for the Woods. Length: 21’ Width: 10’ 2” Height: 11’ 6” Weight: 40,000 - 46,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Bandit 2090 20” Drum Chipper, John Deere 200hp with 1803 hours, Auto Feed, Winch, Hydraulic Turn Discharge and Jack. Weight: 19,700 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Bandit 1590 18” Drum Chipper, 140hp John Deere with 5000 hours, Winch, Telescoping tongue, Cone holder, Hand crank turn and height adjustable discharge, Lift cylinder, Auto Feed, New engine harness, Just serviced and tires, One owner in very good condition ready to work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Barberan UV Oven

--MAKE AN OFFER!---EXCELLENT CONDITION! Pair it up with a HOLZMA panel saw for true "Store & Saw" efficiency!-- BARGSTEDT PROFILINE TLF 210/15/08 INTELLISTORE Plane Storage System (Automatic Panel Storage & Retrieval System) Automatic system operations: Builds and stores stacks of panels of various material types, sizes, and thicknesses. Loads machines and builds rainbow stacks of panels. Replenishes panels between shifts and pre-sorts panels for upcoming shift. Verifies weight, size, and orientation of each panel. Records board usage and makes recommendations for future stocking levels. Increases storage capacity by eliminating transport paths. Specifications: Travel path 10,000 mm (393.70"), Range 5,000 mm (196.85"). Panel length 2,000 - 4,200 mm (78.74" - 165.35"), Panel width 800 - 2.200 mm (31.50 - 86.61"), Panel thickness 12 - 40 mm (0.47" - 1.57"), Max. panel weight 250 kg (551 Lbs.). Stacking height 2,100 mm (82.68"). Beam speed 60 MPM (196 FPM), Carriage speed 80 MPM (262 FPM), Lifting device speed 30 MPM (98 FPM). Positioning precision +/- 35 mm (1.38"). Infeed area in Current Configuration 6-1/2’ x 11’. Equipped with: "woodStore 5.0" Storage control, with 3D View, Stores all parameters, including suction, for each board. 7' H Fencing, with Walk-in door. Control Cabinet Dimensions: 78" x 31" x 90" H. NOTE: Layout has been modified and has not been integrated with a Panel Saw, Machining Center, or the like. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

BARKER 600 HP BOILER, BIOMASS-FIRED: -- BARKER Boiler and Fuel System built & tested in 2011 as a pilot unit. Successful testing has been completed. This surplus equipment includes the following main features: -- Combustion Temp Capability- 2,000 deg. F.; Steam Flow 24,000 lbs/hr saturated; Steam Pressure 1,500 PSI @ 600 deg. F. -- Fuel Feed rate - 3,000 Lbs/hr at 1/4" biomass (5% moisture) -- Heat Input - 7,500 btu/Lbs HHV @ 22 mmbtu/hr. -- All equipment has less than 2,500 actual operating hours since installation.EQUIPMENT MAJOR COMPONENTS: Combustor, Cyclonic combustion technology, Refractory lined Heat Recovery. Steam Generator. Rotary Drum Dryer for Fuel drying - capable of 30% moisture reduction (at the above combustion parameters) and 1.5 tons per hour (installed as used equipment).BALANCE OF PLANT FUEL FEED SYSTEM: Live-bottom bin, Bunker, Feed conveyors, Wood hog, Vibrating screen, Drag and screw conveyors. Boiler water system - feed pump, water and steam piping Emissions Control: All required bag houses (SJVUAPCD) California permitted. -- Now REDUCED PRICE from $1.5 million !!

2004 Barko 495ML Log Loader 9k Hours on Rebuilt Cummins JD 230 Delimber w/Top Saw Morbark Ground Saw 20' Deck

2008 Barko 495ML, CSI Delimber, Good, Tight Machine

Barko 495ML Joysticks Delimber Good rubber Currently on the job working

Barko 495 Log Loader Delimber 13,000 hours Bucksaw included

2010 Barko 495 Epic Knuckleboom Loader, Joystick Controls, Slasher Package, 5th Wheel Trailer, FEC Reversible Saw, Cummins Engine , Rotobec Grapples, Evans Trailer

2014 Barko 612 Forwarder, Volvo Engine, Original Hours are 8000 Hours, Enclosed Cab with Heat and Air Conditioning, New Front Tires in Front and Rear Tires are 90%, Centers Replaced, Kesla Loader, 28HD Bucket, Ready for the Woods. Length 33 ft 10 in Width 8 ft 8 in Height 11 ft 3 in Weight 35,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Barko 612 Forwarder, Volvo Engine, Original Hours are 8000 Hours, Enclosed Cab with Heat and Air Conditioning, New Front Tires in Front and Rear Tires are 90%, Centers Replaced, Kesla Loader, 28HD Bucket, Ready for the Woods. Length 33 ft 10 in Width 8 ft 8 in Height 11 ft 3 in Weight 35,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Cummins Engine, 52" Grapple, AC, Joystick, Bar Slasher Delimber Package, Pitts KB41 Trailer

Cummins Engine, 52" Grapple, AC, Joystick, 264 CSI Delimber, Pitts Hyd Landing Gear Trailer

2021 Barko 595B -Clean machine -2981 hours -Everything works as it should MORE PICTURES COMING SOON

2022 Barko 595B, 2185 hrs., CSI 264 Ultra, Barko 5250 grapple, Pitts Hyd. trailer, CSI 4400 Slasher, $225,000