Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 26 of 485
9684 Results Found
Sort By 
$ 39,900

2007 Bandit 1590 18” Drum Chipper, 140hp John Deere with 5000 hours, Winch, Telescoping tongue, Cone holder, Hand crank turn and height adjustable discharge, Lift cylinder, Auto Feed, New engine harness, Just serviced and tires, One owner in very good condition ready to work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Palmer, MA
NEF Equipment
855-251-2648
Call

$ 505,000

2023 Bandit 2590 Whole Tree Chipper -300 Hours -CAT C18 755H.P -Deleted NO DEF -All the bells and whistles. -Just serviced -Remote -Reversible knives

Josh Digirolamo
828-302-7264
Call

$ 299,995

2014 Bandit 4000T 1,300 Hours Pre-emission CAT Diesel 84” Cutting Head Just Serviced New Teeth New Wear-bars Back up camera air ride seat Winch

Mitch Stevens
828-773-6986
Call

$ 25,000

New In Stock Bandit SG40 Stump Grinders, REV Wheel, 38HP EFI.

 Constantia, NY
Kleis Equipment LLC
315-623-2111
Call

$ 69,500

2021 Bandit SG-75 Tracked Stump Grinder, 75HP Kohler, Remote, Blade, Clean Low Hour Machine, Can Ship Nationwide.

 Constantia, NY
Kleis Equipment LLC
315-623-2111
Call

$ 20,000

Bandit SG-40 Stump Grinder, Rev Wheel, 38HP EFI, Good Running Machine.

 Constantia, NY
Kleis Equipment LLC
315-623-2111
Call

$ 23,500

2022 Bandit SG40, Low Hours, 38HP EFI Kohler, Tracks, Rev Wheel, Ready to go to work.

 Constantia, NY
Kleis Equipment LLC
315-623-2111
Call

$ 39,000

Bandit 2650 Wheeled Stump Grinder, Remote Control, Good Running One Owner Trade In.

 Constantia, NY
Kleis Equipment LLC
315-623-2111
Call

Call for Price

2012 Bandit 4000T W/Mulching Head, 2892 Hours, Deere 425 HP Engine, Please Call For More Info

 Brainerd, MN
U.S. Equipment Sales
877-451-9525
Call

Call for Price

New In Stock Bandit 60FM Mulching Heads. Call for Pricing.

 Constantia, NY
Kleis Equipment LLC
315-623-2111
Call

Call for Price

In Stock 2021 Bandit 3680T Horizontal Grinder Tracked, Call Today for Sale Pricing or Rentals.

 Constantia, NY
Kleis Equipment LLC
315-623-2111
Call

Call for Price

Barberan UV Oven

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 495,000

BARKER 600 HP BOILER, BIOMASS-FIRED: -- BARKER Boiler and Fuel System built & tested in 2011 as a pilot unit. Successful testing has been completed. This surplus equipment includes the following main features: -- Combustion Temp Capability- 2,000 deg. F.; Steam Flow 24,000 lbs/hr saturated; Steam Pressure 1,500 PSI @ 600 deg. F. -- Fuel Feed rate - 3,000 Lbs/hr at 1/4" biomass (5% moisture) -- Heat Input - 7,500 btu/Lbs HHV @ 22 mmbtu/hr. -- All equipment has less than 2,500 actual operating hours since installation.EQUIPMENT MAJOR COMPONENTS: Combustor, Cyclonic combustion technology, Refractory lined Heat Recovery. Steam Generator. Rotary Drum Dryer for Fuel drying - capable of 30% moisture reduction (at the above combustion parameters) and 1.5 tons per hour (installed as used equipment).BALANCE OF PLANT FUEL FEED SYSTEM: Live-bottom bin, Bunker, Feed conveyors, Wood hog, Vibrating screen, Drag and screw conveyors. Boiler water system - feed pump, water and steam piping Emissions Control: All required bag houses (SJVUAPCD) California permitted. -- Now REDUCED PRICE from $1.5 million !!

Bob Bullin
800-374-5009 ext:346
Call

$ 127,900

2014 Barko 612 Forwarder, Volvo Engine, Original Hours are 8000 Hours, Enclosed Cab with Heat and Air Conditioning, New Front Tires in Front and Rear Tires are 90%, Centers Replaced, Kesla Loader, 28HD Bucket, Ready for the Woods. Length 33 ft 10 in Width 8 ft 8 in Height 11 ft 3 in Weight 35,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 La Crosse, WI
NEF Equipment
855-251-2648
Call

$ 127,900

2014 Barko 612 Forwarder, Volvo Engine, Original Hours are 8000 Hours, Enclosed Cab with Heat and Air Conditioning, New Front Tires in Front and Rear Tires are 90%, Centers Replaced, Kesla Loader, 28HD Bucket, Ready for the Woods. Length 33 ft 10 in Width 8 ft 8 in Height 11 ft 3 in Weight 35,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 La Crosse, WI
NEF Equipment
855-251-2648
Call

$ 28,900

Barko 225 Log Loader Joystick Turntable is good Ctr delimber with topping saw Needs a grapple but we have one available

Mitch Stevens
828-773-6986
Call

$ 40,900

Barko 495 Log Loader Delimber 13,000 hours Bucksaw included

Mitch Stevens
828-773-6986
Call

$ 41,000

2010 Barko 495 Epic Knuckleboom Loader, Joystick Controls, Slasher Package, 5th Wheel Trailer, Cummins Engine, Rotobec Grapple

 Elkins, WV
Reckart Equipment Co.
304-614-7939
Call

Call for Price

2008 Barko 495ML, CSI Delimber, Good, Tight Machine

 Maplesville, AL
Smith Trucking & Equipment
334-518-9900
Call

$ 260,000

2021 Barko 595B -Clean machine -2981 hours -Everything works as it should MORE PICTURES COMING SOON

Josh Digirolamo
828-302-7264
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved