Equipment For Sale

Capacity: 50,000 lbs @ 50in LC. Hours: 10,727. Mast: Two-stage ultraview mast (197"/216"). Forks: 100" (3.3" x 14" x 100") Attachment: Side Shift and Fork Positioner. Engine: Cummins QSL9 TIER 4F. Dana TE-17 3-Speed powershift Transmission. Call for delivered price.

Capacity: 36,000 lbs @ 48" LC. Mast: 18 ft mast. Forks: 8ft. Tires: Solid Pneumatic. Engine: Cummins Diesel. Attachment: Side shift, fork positioner. Hours: 10,500 and 12,700. Great Shape. Call for delivered price.

(3 units). Capacity: 18.000 lbs. Mast: 112" / 132" Two-stage mast. Tires: Solid Pneumatic. Hours: 9.087, 13.629 and 11.359 Attachment: Side Shift, Fork positioner. Engine: Diesel. Notes: Full Cab with A/C and heat. Call for delivered price

Capacities: 11” minimum length 98” maximum length 1” minimum width 32” maximum width 5/8” minimum thickness 3” maximum thickness with a conversed glue spreader(model 30J)

TAYLOR 40 Section Clamp Carrier.Specifications: -- 40-Section, 8-1/2' width capacity -- Average 4/5 clamps per section (175 clamps total), all with 32" max. clamp opening. -- Equipped with (175) clamps plus a pallet of spares that require repair, 32" clamps with 2-1/2" high jaws .Complete with: -- Heavy Duty Drive for rotation,& clamp tightening. -- Foot pedal control. -- Includes a glue applicator.

TAYLOR - 20-Section: Clamp Carrier Specifications -- 8-1/2' Width cap. -- 39" Max. clamp opening; 2-1/2" Jaw height. -- Approx. (4) clamps per section.Equipped with: -- (75) Clamps total. -- Pneumatic tightener. -- Pneumatic panel flattener.Complete with: -- Air drive carrier rotation. -- I-Beam chain assembly.NOTE: Already taken down.

TAYOR 16-Section Clamp Carrier 20.5' width cap., (7) clamps per section (128 clamps total). .48" max. clamp opening clamps with 4-1/2" X 3 1/4" jaw height (128) Rocker plates 4" X 6" @ 80-1706 (purchase in June 2024)Complete with: -- Semi-automatic clamp tightening, -- (2) Air drive carrier rotation. -- (2) Pneumatic panel flattener -- OAL approx. 24' X 14' X 12'Note: The buyer will be responsible for tear down and loadingMachine model CC 20,5-16-481

--In Auction: https://exfactoryauctions.com/Detail/CR-230068/event/A122024$1 --No Reserve!-- TAYLOR 800036 7' W 12-Section Semi-Automatic Pneumatic Clamp Carrier, with Flattener & Tightener Equipped with: (71) 32” Cap. Clamps, with 4-5/8” W x 3-1/2” H Jaws. Air motor drive. Dual foot pedal control. Complete with: Pneumatic Panel Flattener. Pneumatic Clamp Tightener.

TAYLOR - 6-Section: Pneumatic Clamp Carrier6-Section x 10-1/2' width cap.; (36) total clamps; 30" opening on clamps; 3-1/2" high jaws; includes: Pneumatic rotation; tightening; panel flattening. -- Overall assembled dimensions: 9-1/2' Deep x 13-1/2' wide x 9' tall.NOTE: Teardown not included.

TAYLOR 8' W 60-Section Semi-Automatic Hydraulic Clamp Carrier, with Flattener & TightenerEquipped with: -- (214) 32"; Cap. Clamps, with 4-5/8"; W x 3-1/2"; H Jaws. -- Dual air motor drives. -- Dual foot pedal control.Complete with: -- Pneumatic Panel Flattener. -- (2) Pneumatic Clamp Tighteners. -- Clamps (As pictured).

1968 Taylor Cable Skidder 453 Detroit New Front Tires, 90% Rears Bear Claw Chains Front and Rear At 75% Runs and Operates Good

TB Woods 150HP Soft Start

10 HP 575 volt unit. Has between 25-27 CFM. RPM: 1745

1760 RPM, TEFC

Tregarne Wood Welder New in Box

175 hp, Cummins, 6 cylinder,diesel, 9' bucket, 20.5 R25 tires

TEREX ATLAS 1604 K ZW Wheeled Excavator w/ Grapple and MagnetSpecifications: -- 120 HP Diesel Engine -- 7.5 kW generator.Equipped with: -- Grapple -- Magnet -- Just replaced the solenoids fuel injectors and the exhaust valve. Hours: approx. 3,500

TEREX 256 Off road truck Runs good Needs brake work

2014 Teremax Dump Truck on Tracks, 1800 Hours, New Final Drives

2014 Terex TBG 640 Horzontal Grinder with 210 original hours. NEEDS ENGINE it was a Cat C18. The mill takes Morbark 1300 hammers and tips, pumps are there, 210 original hours on the machine. Weight 82,000 lbs Length 43' Width 8' 3" Height 13' 3" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.