Equipment For Sale

2008 Baker MDL BBR-O 2 HD Band Resaw S/N 08-4001

1995 Baker MDL BBR-O 3HD Band Resaw

Baker Dual Head Re-saw (horizontal) 1 1/4" band, 16" cant capacity. 2 Baker turn arounds with cant turners and 4 Baker brush de-dusters. All machinery has been stored in a building since we stopped sawing in 2008. Please call with any questions.

Baker Band Resaw BBR-O Return Conveyor

Baker Band DBL End Trim Saw with Belt Waste Conveyor & Hyd Drive

Stationary Baker Blue Streak Baker Coresets computer set works with 8 board sets and 8 core sets 74HP Kohler Diesel (Does not require DEF) Large 28'’ precision machined solid steel band wheels I-Beam frame with solid steel bunks Up to 40'’ diameter logs Moveable guide opens to 36'’ wide cut Large easy to see measurement dial Standard 1.5'’ or 2'’ blade option Cutting length 20'6'’ Board drag back return Fully hydraulic, log loader, clamp, fence arm, toe rollers, variable speed dual chain drive. head raise and lower, log turner forward and reverse up and down, movable guide, built in 10 gallon tank, & controls Blade enters clean side of log after first cut and rotation operator controls in one convenient location Four post heavy duty tube frame head 23 gallon frame mounted fuel tank Hydraulic Blade tension 5 gallon tank with dual valves for blade lube drip baker bullet guides

Baker Mill Like NEW

Baker board deduster, up to 8" wide capacity, electric drive, price includes all new brushes, feed belt and gone through completely, very good condition

Baker single head resaw, 12" wide capacity, 25hp electric drive on head, includes 2 end-around tables to make complete run-around system, price includes going through shop and is ready for production

Model C 20 HP W Return Over Head Side Power Rollers

Baker Products’ Self-Dumping Steel Hoppers can be used to collect almost anything. It has a reinforced base and continuous weld. When the hopper is full, you can easily pick it up with almost any forklift and dump it simply by pulling a lever. It has a lock, so the load will not dump by mistake. The Baker Self-Dumping Steel Hopper is a convenience every company should have. A. 2 yd (1,828 mm) 603 lbs. (274 kg) B. 2 yds (1,828 mm) 805 lbs. (365 kg) C. 3 yds (2,743 mm) 971 lbs. (440 kg) A. 44” (111.8 cm) 59” (150 cm) 69½” (176.5 cm) B. 45½” (115.6 cm) 57½” (146 cm) 64½” (163.8 cm) C. 55” (139.7 cm) 58” (147.3 cm) 71” (180.3 cm) Forklift Opening: 2½” (6.4 cm) high by 48½” (123.2 cm) wide

BAKER C 4-HEAD Horizontal Resaw w/Powered Return6" Wide x 12" high cap. Resaw; standard spring blade tensioning system;Specifications: -- 13'-2" x 1-1/4" x 0.035 blade provides thin kerf savings; quick & easy blade height adjustments. -- Wheels: 28" Dia. CNC machined, dynamically balanced, all-steel band wheels, (4) bolt flange; rough top feed belt combines with opposing side feed rolls and air pressure hold over rolls; idler hold downs . -- (4) 20 HP Total Enclosed Fan Cooled Motors; Thin-kerf technology and the Baker Low Profile Flat Guide System generates up to 60-70% less sawdust and up to 25% more boards, easily out-producing a gang rip. Complete with: -- Hydraulic variable feed speed from 20 to 120 FPM (6 to 36 MPM) with a tank, flow control and remote feed shutoff; powered side feed rolls. Includes: -- Powered conveyor, powered return conveyor, NEMA electrical panel with the starters, motor overload protection, remote start/stop stations.6" x 6" Square dust collection with a 90° adapter chute to a 4" dia. outlet (can be rotated in (4) directions); 600 CFM required for each drop.

1993 Baker 4 Head Resaw Approx. 50 blades Size: 13' 2" x 1" x .035" x 1/2" Tooth Carbon Resaw Blade Saw 1 needs a new spindle. Hydraulic drive. New Main Breaker New Fuses A couple of Starters have been replaced. Approximately 6,240 Hours Baker 4 Head Resaw Specifications Guide System: Baker Low-Profile Flat Guide System with steel guide plates for enhanced precision. Saw Dust Outlet: Dimensions: 6"x6" (15.24 cm x 15.24 cm) square. Outlet Adapter: 90° adapter chute to a 4” (10.2 cm) diameter outlet. Rotation: Can be rotated for discharge in four directions. Recommended Airflow: 600 CFM (17 m³/min). Motors: Main Motors: 20 HP, 3-phase motor on each head. Inline Hydraulic Pump Motor: Cutting Capacity: 6" x 12" (15.24 cm x 30.48 cm). Feed System (3-Sided Feed Works): Rough-top belting for traction. Powered side feed rollers for smooth material handling. Non-powered hold-over wheels. Feed Speed: Fully variable, adjustable from 20 to 120 feet per minute (6 to 36 meters per minute). Delivery is available at the buyer’s expense

Baker 2-Head Resaw 20 HP Motors Return Conveyor

BBR-0 | Electric Drives | No Hydraulics | 30 HP Motors | 1992

2018 Baker Model C 4 Head Resaw Well maintained Work ready Only selling to go to a smaller unit SN 18-4895

1992 Baker 6 Head Resaw Six-Head "C" Saw 1 needs a spindle and wheel replacement. Approximately 8,320 Hours Serial Number 92-379 6 Motors (30) HP (37) Amps Mechanical Drive

2 - Baker Stacking Racks available

Baker Band Resaw Return conveyer 480 volt 3 phase 6" x 12" capacity

Baker single head resaw, Model; BBR-O, Serial#; 04-3371, has tilting infeed belt w/ digital display, electric drive, includes spare parts/ blades, excellent condition