Equipment For Sale

2007 Ponsse Beaver, CALL

2022 Ponsse Ergo, Low 1154 Hours, Excellent Condition, Tracks All Around, Ready to Work.

New Ponsse Buffalo 8wd Log Forwarder, Best in the industry, give is a call today for pricing.

2003 Ponsse Bison 6 Wheel Forwarder Runs Approx 14K Hrs

2023 Ponsse Buffalo -750 hours -Tight and dry -16 ton carrying capacity -Active crane -K100+ loader -Supergrip 360s grapple -Tracks not included OPTIONS LIST IS IN PICTURES ABOVE!!!!!

2019 PONSEE ELEPHANT KING FORWARDER 7,585 HOURS GOOD TIRES 46,297 OPERATING WEIGHT MERCEDES 275HP ENGINE VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2006 Ponsse Buffalo king -20000 hours -6 cylinder Mercedes -K100+ crane 33’ reach -New crane pump -Compete new center section -New frame lock -New steering cylinders -New extension and jib cylinders New rear differential New brake cans front and rear New rear 750 tires -New 750 tracks came with the machine(1 year old ) -360 super grip bucket -2 new front planetarys -New boom hoses -New boom extensions chains

2022 Ponsse Buffalo, 3300 hrs., A/C, Blade, Webasto Pre-Heater, 710/45/26.5 tires @ 75%, Tracks @ 90%, $369,500

Portage & Main Outdoor Wood Stove W/ Wood Chip Feeder

Porter Planer Model 700 S/N 5916, Straight Knifes 10HP Motor

Porter Cable 5HP Single Phase Compressor.

The professional horizontal splitter with longitudinal tractor chassis for mobile applications! Complete Posch Splitter, Processor and Packaging lines sold exclusively through Northeast Implement. Better cutting, splitting machines that are fast and safer, call 607-589-6160 to get yours today!

2000 Povlsen Wide-bandsaw mill. In good working condition 75hp Isuzu Diesel engine and has approximately 1500hrs on it. Mill can saw logs approximately 36"D x 25' L Comes with an Armstrong #2 bandsaw sharpener and approximately 20 new bandsaw blades.

Powerfist 1HP Dust Collector

POWERMATIC Shaper TS-29, with Sliding Table & Tilting SpindleSpecifications: -- 3/4", 1", & 1-1/4" Dia. interchangeable tilting spindle, 3/8" & 1/2" collet & router bit adapters, tilts 45° forward and 5° back, 7-1/2 HP - 3,600 RPM motor; 3,000 - 4,000 - 6,000 - 8,000 - 10,000 RPM spindle speeds via 4-step V-pulley with "quick release". -- 4-3/4" Cap. under nut when using the 1-1/4" spindle, 7-1/16" spindle travel; 51-1/2" x 33-1/2" extra thick cast iron main table, (3) removable table inserts 2-1/2" - 5-1/2" & 5-7/8" x 4-3/16" (oval).Complete with: -- Large scale "ACCU Fence" with integrated 4" dust collection shroud, reversing switch, AMBI-TECH electronic brake, cutterhead guard, clamping miter gauge & magnetic control; incl. owners manual & parts list. Actual Model # 1791284

POWERMATIC - WB-25, ...Wide Belt Sander1-Head; 25" width capacity; 1/8" to 6" thickness capacity.Combination sanding head with: 4" Dia. rubber-covered contact roll; 2" wide polishing platen; micro-adjust platen; steel abrasive belt tension roll; steel idler roll: 25" x 75" Abrasive belt capacity.Equipped with: -- 15 HP 3-Phase main motor; 1 HP variable feed motor, 15 - 49 FPM. -- 1/4 HP Table raising & lowering motor with: Auto adjust thickness assist; 1/8" to 6" opening with (4) screw jacks. -- Double infeed & outfeed rubber covered holddown rolls. -- Complete with: -- Digital readout; air eye belt sensing; limit switch overtravel protection; magnetic starter; overload protection; load meter; emergency brake.Includes: Owner's manual & parts list.

POWERMATIC - RB-37, ...Single Head Wide Belt Sander1-Head, 36" width cap., combination sanding head. -- Includes: 4" Dia. contact roll & 2" wide polishing platen, micro-adjust platen; 15 HP main motor. -- Abrasive belt size: 37" x 60"; with air tensioning, air jet abrasive belt tracking.1 HP Feed drive; variable feed speed of 15 - 30 FPM conveyor speed.0" - 5-1/4" Opening with: (4) Screw jacks; double infeed & outfeed rubber covered holddown rolls. -- Complete with: Magnetic starter; overload protection; load meter; emergency brake.

POWERMATIC 221 PLANER WITH BYRD HELICAL HEAD20" x 8" Cap., 10 HP TEFC belted drive motor, BYRD Helical cutterhead, hand wheel micro-adjust table; 1 HP feed motor for variable speed from 20 - 50 FPM, segmented infeed roll and sectional chipbreaker, 4" dia. smooth outfeed roll. -- Complete with: Magnetic starter and dust hood.

POWERMATIC - TS-80, ...Single Spindle ShaperAccepts: 3/4" - 1" - 1-1/4" Dia. interchangeable spindles; 5-1/2 HP motor; 3,625 - 5,000 - 7,250 - 10,000 Spindle speeds. -- 4" Cap. under nut when using 1-1/4" spindle; 6-19/64" spindle stroke; approx.: 39-1/2" x 31-1/2" Extra thick cast iron main table. -- Complete with: Adjustable split fence; spring hold-downs; removable table inserts; dust collection shroud; reversing switch; spindle brake; cutter-head guard. -- Includes: Infeed & outfeed tables shown in picture and a box of spindles. - NOTE: Needs some work on bearings.

POWERMATIC Shaper PM 2700, Spindle Shaper model 128-0102C 5 HP, Single Phase, 230 V - 1280101-CSpecifications & Features: -- Digital readout gives the use of exact spindle height and allows for 0.001" adjustments. -- 4" Spindle travel. -- 5 HP Motor -- Heavy-duty 30" x 40" precision ground tabletop for smooth stock feeding and Heavy-duty cast iron base. Includes: -- 3/4" and 1-1/4" spindles -- Independently adjustable fence sides. -- Micro-adjust control knobs allow for precision adjustment for the fence. -- Integrated casters can be raised and lowered to mobilize shaper. -- Superior clear cutter guard promotes safety, allows observation of the entire cut. -- Table predrilled and tapped for Power Feeder mounting.Dust Collection Minimum CFM Required (CFM) 600; 4"Dust Port Outside Diameter