Equipment For Sale

LAGUNA SMART SHOP SUV - 48 CNC Router, 4' X 8' with ATC:48" x 96" Moving gantry, fixed table design in a front-to-back configuration with a 6-zone vacuum table with T-slots, including manual controls, approx 3,500 lb, "rigid" welded steel frame.Specifications: 48" x 96" x 9.5" Axis travel with 12" clearance under the gantry, Speeds of 2,000 IPM rapid travel X & Y with 1,000 IPM maximum cutting speed, Servo drive system for X, Y, Z and A (allows expansion to 4th axis)Spindle: (1) 12 HP "HSD" spindle with (ATC), 5,000 - 24,000 RPM Range, Ceramic Spindle Bearings. Supported by Automatic Tool Changer with (8) tool positions, tool rack includes assorted tool holdersAll axes: Ride 25 mm heavy-duty HiWin HG Series linear bearings and rails on all axis rack. "Helical" rack-and-pinion drives on "X" and "Y" axis, and precision-ground ball screw drive on "Z" axis. Gantry is driven on each end (two "helical" rack-and-pinion drives on "Y" axis)Control & Operator Interface: The B & R Automation (Austria) System-matched controller and drive components for easy diagnosis and exceptional reliability. -- Machine features the networking, connectivity and online troubleshooting typically found in Windows environments without the Windows baggage. -- Runs industry-standard G-Code that can be created from any CAM software package. Program transfer to the controller can be accomplished with USB, or via Ethernet transferComplete with: Expandable control system for custom applications. Spindle speed control through programming, Manual overrides of spindle speed and feed speeds during run. Centralized lubrication system for all axis, assorted tool holdersIncludes: 10 HP vacuum pump for the six (6) independently controlled zones, Additional set of bits.NOTE: The above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot. Digital Manual is available to the Winning Bidder A rigger is required. Buyer is Responsible for breakdown, loading, and removal. Laguna recommends a 6,000 lb capacity forklift with 72" forks

Laguna PSHAP 5030-0130 ShaperThe Laguna pro shaper combines a precision shaper with features normally found only in much higher-priced machines. For starters, the table measures an impressive 31″ x 39″ and is pre-drilled to accept most power feeders. The fence has a precision micro-adjustment that is aligned by a solid steel bar. Each full revolution of the turn handle gives an exact 1/16″ adjustment to the fence. Offers 3 speeds with a unique quick-change poly-groove belt system rather than the traditional V-belt. Digital readout is standard for the spindle height. The pro shaper is also equipped with a reversing switch and all controls are mounted with an easy access panel. The fit and finish on this machine is top-notch and even includes a wheel kit built right into the base. Specifications: -- Motor: 7.5 HP -- Fence: Micro adjustment -- Table size: 39 - 5/16″ X 31 - 7/16″ X 3 - 1/2″ -- Spindle travel: 4″ -- Spindle size: 3/4″ and 1-1/4″ -- Capacity under nut: 6″ (for 1-1/4″) & 4″ (for 3/4″) -- Spindle speeds: 5000 / 7000 / 10000 rpm -- Table opening diameter: 7 - 5/16″ -- Digital readout: Standard -- Direction: Forward/Reverse switchNOTE: The above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

Laguna Fusion F3 36" Fence Table SawLaguna Fusion line was developed for demanding woodworkers. Equipped with a precision fence, F3 features the Hi/Low aluminum extrusion known from European saws. The hybrid fence on the Laguna Fusion offers the best of European and American fence features. This fence is NOT designed to be used on the LEFT side of the blade! Rail or tube on the LEFT side is provided only to make the ON/OFF switch position. Permanently lubricated bearings & Acme screws are part of the internal DNA.Specifications: -- Dust Port Size: 4″, Blade Guard Dust Port Size: 1-½″ -- Maximum Blade Diameter: 10″ -- Arbor Size: 5/8" Arbor Speed: 4,500 RPM -- Maximum Width Of Dado: ¾″ -- Blade Tilt Direction: Left, Max Blade Tilt: 45° -- Maximum Depth Of Cut At 90°: 3-1/8", Maximum Depth Of Cut At 45°: 2-1/8"Features: 3HP TEFC Motor, Industrial Cabinet, Fence & Trunnions, 10 x 40 T Carbide-Tipped BladeNOTE: The above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot. Overall Width (side-to-side) 69", Overall Depth (front-to-back) 56", Overall Height 43"

Lamb Hammer Hog 36x40 direct drive.

LAMB 23x27 inch opening grinder with 150 HP motor, 1 3/8” screen and starter control. 460 volt 3-phase

Lamson Multistage Centrifugal Perg Blower for Bag House

LANAIR Oil Heater

32' Well, 27" Alum Pull-outs, LED Light Package, Alum Upper and Rear Removable Decks, Strobe Light Package with Battery Backup in the Bumper, Digital Scale, Flip Axle Attachment Hinges, Air Raise & Lowering Valve, Bolt on Chain and Binder Racks Price plus FET

Lane Manual Carriage with Track and Moody's Improved Log & Taper Dogs

Lane 3HDB Circle Saw Mill w/Top Saw, Diesel Power Plant, Fuel Tanks, Cab & Controls. 3 Strand Log Infeed w/Stop & Load. Log Turner.

LANGE MASCHINEN BAU B85K Edgebanding MachineSpecifications: -- Workpiece thickness: 8 – 50 mmWorkpiece width min.: approx. 75 mmWorkpiece length min.: approx. 120 mmEdging thickness: 0,4 – 3,0 mmMax edge thickness = Workpiece thickness + 4mm (2+2)One sided automatic edge banding machine with direct glue application to straight workpieces, high frequency cut off station, high frequency top and bottom milling unit, chain feed, double roller top pressure and work piece support. For ABS,PVC, melamine and strong wood veneer roll materials as well as fixed lengths.

LANGZAUNER G-5920 Cross-Cut Guillotine. Specifications: -- 35.5" Blade hydraulic pressure bar and knife; -- 5 Gal tank, pump is driven by 1.5 HP motor.Complete with: -- 2-Hand operation or foot pedal, Emergency-Stop, (3) photocells for safety, -- All safety guards per international standards.

Lantech Stretch Wrapping Machine Automatic, 3'x5'x10' tall, Computer controls, Power roll conveyor with turntable, No motor on turntable

LANTECH Q-300 Semi-Automatic Stretch Wrapper with Low-Profile RampSpecifications: -- Maximum versatility. Wraps large, tall, heavy or fragile loads including doors, windows and more. Production speeds 25 - 35 loads per hour. -- Maximum load size: Diagonal 73.5", Height 80", Weight 4,000 Lbs., Film roll diameter 10", Film web width 20".Equipped with: -- 65" Diameter Low-profile turntable with Variable speeds 0 -12 RPM & 3/4 HP TEFC. -- Power-roller stretch system - 200%. -- Micro-controller programmable control, Low-profile ramp.

LARICK 360A Profile SanderSpecifications: -- Single-head Profile Sander;1.5 HP TEFC motor belt drives spindle which tilts 45° forward & 30° backward; -- 400 - 1,800 RPM mechanically controlled variable speed; 4" vertical & horizontal spindle adjustment. -- 36" x 33" Solid wood table top, 36" table height; 1" dia. x 4" long spindle accepts standard sanding discs, but are designed for LARRICK profile discs made to customer specifications. -- Complete with: Enclosed fabricated steel base, dust hood w/piano hinge for easy access to sanding disc, Stationary Fence, and large handwheels for easy spindle adjustment.

Single head; 1.5 HP TEFC direct drive motor, spindle tilts 60° forward & 40° backward, inverter controlled variable speed from 400 - 1,800 RPM, RPM display; 4" vertical & horizontal spindle adjustment. -- Features: 36" x 33" Solid wood table top, 36" table height; 1" dia. x 4" long spindle accepts standard sanding discs but are designed for LARRICK profile discs made to customer specifications. -- Complete with: Enclosed fabricated steel base, dust hood w/piano hinge for easy ascess to sanding disc, stationary fence, large hand wheels for easy spindle adjustment.

Single head; 1.5 HP TEFC direct drive motor, spindle tilts 60° forward & 40° backward, inverter controlled variable speed from 400 - 1,800 RPM, RPM display; 4" vertical & horizontal spindle adjustment. -- Features: 36" x 33" Solid wood table top, 36" table height; 1" dia. x 4" long spindle accepts standard sanding discs but are designed for LARRICK profile discs made to customer specifications. -- Complete with: Enclosed fabricated steel base, dust hood w/piano hinge for easy ascess to sanding disc, stationary fence, large hand wheels for easy spindle adjustment.

Single head; 1 HP Belt drive motor, Fixed spindle, Mechanical controlled variable speed from 700 - 1,700 RPM, 4" vertical spindle adjustment. -- Features: 27" x 25" Solid wood table top, 36" table height; 1" dia. x 4" long spindle accepts standard sanding discs but are designed for LARRICK profile discs made to customer specifications. -- Complete with: Enclosed fabricated steel base, dust port, large hand wheels for easy spindle adjustment.

LARICK 120 Single Spindle Profile Sander;Sands raised panels, and door edges.Specifications: -- 1" Dia. x 4" long belt driven arbor; 700 - 1700 RPM variable speed, 1 HP motor. Arbor is vertically adjustable. -- Complete with: 25" x 22" butcherblock maple table, enclosed fabricated steel base and large hand wheels for easy spindle adjustment. -- Includes: Sensing safety guard for anti-automatic restart protection.