Equipment For Sale

2015 Cascadia Day Cab DD15 Engine DT 12 Transmission 551,638 Miles

2019 Freightliner 122SD X15 500 HP 18 Speed Air Ride

1993 Freightline Day Cab Detroit 60 Series New 13 speed tranny New tires Nice Truck

2010 Freightliner M2 Crane Truck National 400B Crane New Cable 49648 Miles

MLS Number 12709353 2007 Freightliner M2 Flatbed Truck 271,372 miles Mercedes Benz engine Allison 6 speed automatic Not CDL 27'3" bed Air brakes spring suspension

2021 Freightliner M2 Bucket Truck Odometer38,296 miles Stock#1367 VIN 1FVACWFD1MHMR2977 Engine Make- Cummins Engine Model-6.7L ISB 240 Engine HP -240 Fuel Type Diesel Drivetrain Trans Make- Allison Trans Model- 2500RDS Trans Speed- Auto Boom Make Altec Boom Model LR7-60E70RM Boom Serial# 1120FF13027 Capacity/Full Reach 75' Boom-Type Rear Mount Class 7 Delivery is available at the buyer’s expense

2011 Freightliner M2 Chip Truck, 116,000 miles, 6 Speed Manual Transmission. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Frick Gang Edger (no motor) 636 S/N 160 with Gang of Blades.

Frick Sawmill 4 Head Block Mounted on a drop deck trailer. Everything folds up for transport. Includes: Cummins motor

Parts machine log turner hydraulic power pack other parts

Frick 00 Sawmill 4 head block 471 Detroit (missing radiator) 4 saws Steel track New wheels and bearings Needs some work

Frick Timber-Tiger 10" Double Arbor Gang Rip Saw 36" opening includes 15' shifting infeed with 10" ladder back chain. (2) 300hp 1775 RPM electric motors

Frick 4 Head Block Carriage With Track & Carriage Drum Drive, Husk, Cab & Controls

Frick 38" 4 Head Block,Track, Paneagraph,Husk frame cab controls, Top Saw 36" and 56" Blade on Husk, Carriage & Track with T-Berry carriage Drive.

Frick 3 HB carriage, track, husk, cab & controls

Frick Saw Husk with Top Saw

FRIULMAC - Dual-Feed, ...Double End Cut-Off SawFor squaring workpieces and for transportation to a Planer or Moulder with a straightening table.Specifications: -- 79" Max. (2,000 mm) opening from Saw to Saw. Motorized opening with LED readout on the control panel; left-hand fixed with left-hand fence line. -- Hopper Magazine - material capacity: Min. length: 7.87" (200 mm), max.: 79" (2,000 mm); width: 1-1/8" (30 mm) to 6-3/4" (170 mm); and thickness: 0.59" (15 mm) min. up to 2-3/8" (60 mm) max.; hopper stack height: 23-1/2" (600 mm).Each side is equipped with: -- (2) Trim saw motors, 5.36 HP each; saw blade dia. 9.84" (250 mm). -- Hydraulic feed drive unit: 4 HP (3 kW) motor. -- Trimming & throughput capacity: Up to (55) pieces/Min.NOTE: Voltage transformer for 600 Volts available with the machine

FRUILMAC RANDOMAT E - End Matcher; --÷For End Matching flooring or cabinet & entry door rails or tongue and groove. The feed-thru system allows continuous feeding of random length parts with any kind of profile.÷Capacity & Description: --÷ Width cap. 1-3/16" x 9-7/8'; length cap. 6-5/16" x 137" length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness cap. -- -- Approx. (10) cycles/Min depending on part length & width; --÷ Feed system with (2) 120" long x 10" wide powered infeed & outfeed belt conveyors, parts are automatically fed & positioned with sensors. --÷ Positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle is automatic. --÷ Parts are conveyed past the 1st & 2nd shaper head, automatically reversed and positioned to a positive stop for the 2nd cut on the other end of the part. At the same time the 1st shaper head would be coping the 1st end of another part. --Equipped with: -- -- Twin 7.5 HP - 7,500 RPM high-speed shaper motors which pneumatically traverse in tandem for each cutting cycle. -- -- Cutting station with overhead hold-down wheels and 4-point pneumatic clamping with (2) overhead & (2) horizontal clamps. --Controller & Operator Interface: Key Pad SIEMENS Controller, PLC controlled conveyor & shaper cut cycle for automatic operation, variable feed speed conveyor line, and shaper head advance with LED readout on the controls. --÷Includes Infeed and Outfeed Conveyors

FRUILMAC RANDOMAT E - End Matcher;For End Matching flooring, cabinet & entry door rails, or tongue and groove. The feed-thru system allows continuous feeding of random-length parts with any kind of profile. -- Capacity & Description: --÷ Width cap. 1-3/16" x 9-7/8'; length cap. 6-5/16" x 137" length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness cap. --÷ Approx. (10) cycles/Min depending on part length & width; --÷ Feed system with (2) 120" long x 10" wide powered infeed & outfeed belt conveyors, parts are automatically fed & positioned with sensors. --÷ Positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle is automatic. --÷ Parts are conveyed past the 1st & 2nd shaper head, automatically reversed and positioned to a positive stop for the 2nd cut on the other end of the part. At the same time, the 1st shaper head would be coping the 1st end of another part.Equipped with: --÷ Twin 7.5 HP - 7,500 RPM high-speed shaper motors which pneumatically traverse in tandem for each cutting cycle. --÷ Cutting station with overhead hold-down wheels and 4-point pneumatic clamping with (2) overhead & (2) horizontal clamps. --Controller & Operator Interface: Key Pad SIEMENS Controller, PLC controlled conveyor & shaper cut cycle for automatic operation, variable feed speed conveyor line, and shaper head advance with LED readout on the controls. --÷Includes Infeed and Outfeed Conveyors