Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 357 of 487
9732 Results Found
Sort By 
$ 15,500

THOMAS TURNBAK Return Conveyor for EdgebandersTHOMAS "Turnbak" 90" L x 120" W Automatic Return Conveyor: Left-hand feed, right-hand return layout. - Adjustable table pass-line, 32" to 38" height. -- Infeed Receiving Conveyor: 90" L x 120" W with 49" W; line-shaft PVC covered rollers. Rollers 1-7/8" dia. on 4" centers. -- Return Conveyor: (3) Sections; 84" L x 49" W, and (1) section 60" L x 49" W; powered return conveyor; line shaft driven; PVC covered rollers. -- Transfer Table: Pneumatic actuated automatic table pop-up with photo-eyes. (12) 1/2" Dia. rubber cross conveyor belts (dimensions 90" L x 49" W). -- (3) Transfer belts need replacing. -- Includes: (1) Section of 48" L x 49" W; non-powered Return Conveyor. -- LEESON Inverter with: 2 HP LEESON Motor. -- With: Adjustable control system and operator manual. -- The transfer process occurs on a continuous basis. -- (3) Transfer belts need replacing. NOTE: Needs(3) Transfer Belts; actual model number: 90 x 120 4C

EX-FACTORY INC.
704-841-2001
Call

Call for Price

Thompson Lane Saw Guide Milling Machine

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

thompson-Lane Saw Guide Milling Machine S/N 9 3 1

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Call for Price

TIERNEY 10" Gang Saw

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Tierney 24" Gang With In & Out feed 300HP

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 245,000

one owner machine, dual arch grapple, winch, stacking blade, turn around seat, new 35.5 tires, new windows, nice tractor!

 Tuscaloosa, AL
Black Warrior Equipment
205-454-4646
Call

$ 26,500

1999 Tigercat 630B -14000 frame hours -4200 on 8.3l Cummins -New fuel filter -Greased -Two boom cylinders will be needed re-repacked -Top center pin is a little bit loose but almost don’t notice yet Functional woods ready skidder

Josh Digirolamo
828-302-7264
Call

$ 499,000

TC ST5702 FELLING SAW S/N 57T0349, TELEMATICS, 340 DEG HI TQ HI ROT WRIST AND BOOM

 Lucasville, OH
Ricer Equipment
740-289-4318
Call

$ 165,000

2012 Tigercat L870C Feller Buncher -3500 hours on the following: -New engine -Pumps -Finals -Uc is around 70% -New A/C compressor and belts Ready to work

Josh Digirolamo
828-302-7264
Call

$ 89,900

2004 Tigercat 822 Feller Buncher, Equipped with a 22' Hot Saw Cummins 6.7 Engine, 14,000 Hours, Enclosed Cab with Heat, Undercarriage is 90%, 36" Track Pads, Ready for the Woods. Length 13 ft 11 in Width 10 ft 0 in Height 11 ft 0 in Weight 52,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Columbus, OH
NEF Equipment
855-251-2648
Call

$ 73,900

2009 Tigercat 845C Feller Buncher, Tigercat 5702 22" with 360 Degree Head,14.000 Hours, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 50% Ready for the Woods. Weight 57,100 lbs Length 16 ft 2 in Width 10 ft 9 in Height 11 ft 0 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Williston, FL
NEF Equipment
855-251-2648
Call

Call for Price

1999 Tigercat 726B Feller Buncher, 9700 Hours, New Cummins 8.3 Remaned Engine with Low Hours, All Cylinders Repacked, Enclosed Cab with Heat, Tires are 30.5 x 32 Center Section is Good. Ready for the Woods Length 20 ft 0 in Width 9 ft 9 in Height 11 ft 0 in Weight 28,040 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Rockville, MD
NEF Equipment
855-251-2648
Call

$ 480,000

2021 Tiger Cat LSX870D -3432 hours -Leveling cab -Grapple being rebuilt -Tight and dry Clean machine!!!!

Josh Digirolamo
828-302-7264
Call

$ 39,900

2005 Tigercat 240B Log Loader, Equipped with Enclosed Cab with Heat and Air Conditioning, CTR450, New Topping Saw, Decent Tires and Brakes, Hours are 11,400. Length 15 ft 10 in Width 8 ft 6 in Height 11 ft 1 in Weight 38,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Charlotte, NC
NEF Equipment
855-251-2648
Call

$ 69,900

36" Triple grouser pads, low hours for age, well cared for. engine rebuilt at 10k hours

Forestry First
855-588-7871 ext:1
Call

$ 289,000

Bogie dual arch grapple skidder

 Lucasville, OH
Ricer Equipment
740-289-4318
Call

$ 395,000

2018 Tigercat 1185, 4353 hrs., TC FPT N67 Tier 4F Engine, rated at (230 KW) 308hp, Tigercat Extreme Duty pump drive, trans., and hydraulically balanced bogie axles, $395,000

 Greenland, MI
Pats Heavy Equipment
906-883-3800
Call

Call for Price

2015 Tigercat 234

 Maplesville, AL
Smith Trucking & Equipment
334-518-9900
Call

Call for Price

2009 Tigercat 620C

 Maplesville, AL
Smith Trucking & Equipment
334-518-9900
Call

$ 205,000

2021 Tigercat 630H -6047 hours -Brand new rear end -Still working in woods -Can provide service records -35.5 tires 2 Brand new tires on the rear -Blows cold air -DEF deleted

Josh Digirolamo
828-302-7264
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved