Equipment For Sale

1998 Morbark Mountain Goat 30/36,Whole Tree Chipper, has a Caterpillar 575 HP, 325 Undercarriage Which is 80-85%, Enclosed Cab with Heat and AC, New Updated Drum with 1.000 Hours, Morlift 250. Loader, Rebuilt Pumps, New Hydraulic Pump, Hydraulic Oil Cooler and Fan, Ready for the Woods. Length 31' 6" Height 12' 5.5" Width 8' 5.25", weight 36,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

MORBARK 27RXL WHOLE TREE CHIPPER BAD MOTOR V-12 CAT LOTS OF NEW PARTS DISC SHAFT BEARINGS DECK CHAIN AND SPROCKETS JUST WENT THRU CHIPPER AND MOTOR THREW A ROD LOTS OF NEW PARTS JUST NEEDS MOTOR

2002 MORBARK 30RXL WHOLE TREE CHIPPER ENCLOSED CAB WITH HEAT AND AIR CAT V-12 MORLIFT 1000 BOOM READY TO GO

45' Morbark Live Roll Outfeed Rollcase with (21) 6-1/2" x 24" Rolls, Hydraulic drive and height adjustment

MLS Number 1142424 2010 Morbark 5500 Flail Debarker 4260 run time hours and 2717 idle hours 600 HP John Deere Tier III engine Reversing fan 3 Flail-Drum Build date 5/12/10; Delivered new 12/12/12 Infeed opening 23" x 55" Discharge system = 72" wide by 24" long dual folding drag chain conveyor 285 gallon fuel tank; 360 gallon oil tank. Remote control Remote tether Standalone machine 66,500 lbs. Very well maintained Good working condition. Parts/owner and engine manuals

2008 MORBARK TYPHOON 20 CHIPPER -400 horsepower John Deere(rebuilt within the last five hundred hours) -new injectors and new injection pump new fuel pump -new head -new belts -hydraulic pumps -replaced all hydraulic valves -new brakes -all new fluids and filters -new paint chipper has remote control to that works -recently put on 12000 pound winch on back

Morbark 66" chipper

10' Log Trough with 110 Ladder Chain & Electric Drive.

Morbark 640 System Log Deck, Infeed Trough, Head Cab & Controls, Outfeed with 3 Arm Kicker, Bark Conveyor.

Morbark Grinder with New Discharge Chain, Spare Hyd Pack and Parts. Grinder and Core are 3 years old. Frame Is A Little Older But Same Model.

Morbark vibrating conveyor

1995 MORBARK MODEL 20 TREE CHIPPER 7,381 TOTAL HOURS CAT 3406 425 HP ENGINE CAB JOYSTICK CONTROL LOADER $5K WITH EXTRA HARDWARE AND KNIVES VERY GOOD CONDITION WORK READY FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT

2013 Morbark 6600 Wood Hog Horzontal Grinder, Cat C32 with 8400 hours, Parked it 6 months ago. It ran until it was parked. Remote works. Known issues: Needs muffler Needs pto O ring Under side of yoke needs to be cut out and new plate put in. It ran till the day they cut it off so I’m sure they can get it running fairly quick. Needs a good amount of welding work under the yoke and around the mill. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Morbark 30/36 Mountain Goat Track Whole Tree Chipper Caterpillar C-15 Engine 4,145 Hours, Auto Clutch Undercarriage 85% To 90%, Enclosed Cab with Heat and Air Conditioner, 1200 Log Grapple, Ready for the Woods. Length 31'6" Height 12'5.5" Width 8'5.25" Gross Weight 44,760 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Morbark 30-36 Portable Chipper 350HP Cummins Approx 4000 Hrs self Feeding Grapple Up to 18" Dia Material

2009 Morbark 30/36 Tree Chipper -1045 Original hours -C13 440 HP -A/C blows cold -Clean tight chipper

Morbark S/N 8469 25' log trough conveyor w/ 3-arm 2-way hydraulic log kickers and hydraulic drive

Morbark 58" 6 Knife Chip Pack

2021 Morbark 1821 Brush Chipper, Engine Ford 170HP Gas Engine, Hydraulic Winch, 2-1/2" Pintle Hitch, UCC Lighting, ONLY 187 Original HOURS , Ready for Work. Height 8'11" Width 7'3" Length 18'1" Gross weight (approximate) 8,900 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Morbark Model 4600XL Track Horizontal Grinder, Engine is a Caterpillar C-27 1050 HP Engine. Has 2,400 Hours of Running Time and 1,000 Hours Idling time, Undercarriage is 95%, Wireless Remote Control, Air Compressor, Metal Pully on Discharge Conveyor, Various Screen Sizes Ready to Work. Gross weight: 88,640 lbs. Length: 45” Height: 11’11” Width: 11’3” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.