Equipment For Sale

THOMAS TURNBAK Return Conveyor for EdgebandersTHOMAS "Turnbak" 90" L x 120" W Automatic Return Conveyor: Left-hand feed, right-hand return layout. - Adjustable table pass-line, 32" to 38" height. -- Infeed Receiving Conveyor: 90" L x 120" W with 49" W; line-shaft PVC covered rollers. Rollers 1-7/8" dia. on 4" centers. -- Return Conveyor: (3) Sections; 84" L x 49" W, and (1) section 60" L x 49" W; powered return conveyor; line shaft driven; PVC covered rollers. -- Transfer Table: Pneumatic actuated automatic table pop-up with photo-eyes. (12) 1/2" Dia. rubber cross conveyor belts (dimensions 90" L x 49" W). -- (3) Transfer belts need replacing. -- Includes: (1) Section of 48" L x 49" W; non-powered Return Conveyor. -- LEESON Inverter with: 2 HP LEESON Motor. -- With: Adjustable control system and operator manual. -- The transfer process occurs on a continuous basis. -- (3) Transfer belts need replacing. NOTE: Needs(3) Transfer Belts; actual model number: 90 x 120 4C

THOMAS MFG TURNBAK R1 70x96 Return Conveyor System:Line shaft powered roller (PVC covered) for LEFT-HAND Feed & RIGHT-HAND Return Conveyor System. Specifications: -- 70" Long x 96" Wide receiving table; transfer system will handle a panel 96" long x 62" wide max. size (min. 6" x 6"); -- Variable speed up to 120 FPM. -- Automatically receives-and-transfers panel with (10) transfer belts onto the return side and onto a 36" wide & 96" long return conveyor. (approx. 8' long) which conveys panel back to the operator. -- Variable speed from 0 - 120 FPM. -- NOTE: Was previously attached to & used with a 2014 Biesse Akron 1440A Edgebander, see EXF Listing ..."EO-012637"

Thompson Lane Saw Guide Milling Machine

thompson-Lane Saw Guide Milling Machine S/N 9 3 1

Tierney 24" Gang With In & Out feed 300HP

TIERNEY 10" Gang Saw

Tigercat 230 PARTS LOADER No engine, grapple, or pumps Good Cylinders & other items

Tigercat 5000 sawhead

2005 Tigercat 240B

MLS Number 10778902 2013 Tigercat 630D Skidder 7,200 hours One owner Cummins Tier III engine to be rebuilt 35.5 Tires at 75% with dualing rings No winch (has valving and is set up for adding winch) Tight and Dry Machine Well maintained

LOCATED IN BOONVILLE, NY

USE COMPLETE TIGERCAT FRONT AXLE FROM A 724D. AXLE HAS BEEN INSPECTED AND IS IN GREAT SHAPE INSIDE AND OUT. 1400 JD AXLE. PART NUMBER BMO74. HAS 1400 JD RING GEAR AND PINION INSIDE WITH 1400 YOKE (1/2 INCH BOLTS) F0R MORE INFORMATION CALL GAVIN AT 601-410-3416 OR CALL/TEXT TIM 251-366-3237

Tigercat 620C, Dual Arch Grapple Skidder with Winch, New Tracks on Rear Tires, Like New Ice Chains on Front. Clean Machine inside and out.

2007 Tigercat 724E Feller Buncher Parts machine Engine compartment caught fire Cutter head appears to be in good shape Hyd cylinders appear to be in good condition with no visible leaks 28L tires

2007 Tigercat 720E Feller Buncher Engine has 6,500 Original Hours, Enclosed Cab with Heat and Air Conditioning , Center Section is Tight Good Tires Ready for the Woods... Operating Weight 26,350lb Overall Length 18.59ft in Overall Width 8.34ft in Height To Top Of Cab 11ft in Wheelbase 9.59ft in Ground Clearance 1.68in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Tigercat 234B -Clean machine -9700 hours - Pitts trailer -Heat/Ac -ready to work

2012 Tigercat 822C Track Harvester with 12,654 hours, Log Max XT7000 processor head. Operating Weight 69,070.9lb Overall Width 11.16ft in Height To Top Of Cab 12.24ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 TigerCat 845C -14000+hours -Uc 50% -5702 360 head -Disk in good shape -Woods ready

CSI PTD264 delimber & Pitts carrier included. CSI DL-4400 saws shown are not included.