Select For Sale

1993 Freightline Day Cab Detroit 60 Series New 13 speed tranny New tires Nice Truck

2010 Freightliner M2 Crane Truck National 400B Crane New Cable 49648 Miles

MLS Number 12709353 2007 Freightliner M2 Flatbed Truck 271,372 miles Mercedes Benz engine Allison 6 speed automatic Not CDL 27'3" bed Air brakes spring suspension

2021 Freightliner M2 Bucket Truck Odometer38,296 miles Stock#1367 VIN 1FVACWFD1MHMR2977 Engine Make- Cummins Engine Model-6.7L ISB 240 Engine HP -240 Fuel Type Diesel Drivetrain Trans Make- Allison Trans Model- 2500RDS Trans Speed- Auto Boom Make Altec Boom Model LR7-60E70RM Boom Serial# 1120FF13027 Capacity/Full Reach 75' Boom-Type Rear Mount Class 7 Delivery is available at the buyer’s expense

2011 Freightliner M2 Chip Truck, 116,000 miles, 6 Speed Manual Transmission. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2003 Freightliner M2 106 12ft flatbed Bed is almost new Bed has gooseneck ball Pintle hitch and receiver hitch Airlines have been routed to the back Has backup camera that shows gooseneck ball and rear camera for backing/hooking up trailer Cat C7 engine Allison auto transmission 241k miles No AC from factory

It has a C 12 engine Ready to go to work! Call today!!!

Frick 00 Sawmill 4 head block 471 Detroit (missing radiator) 4 saws Steel track New wheels and bearings Needs some work

Frick Timber-Tiger 10" Double Arbor Gang Rip Saw 36" opening includes 15' shifting infeed with 10" ladder back chain. (2) 300hp 1775 RPM electric motors

Frick Gang Edger (no motor) 636 S/N 160 with Gang of Blades.

Frick 38" 4 Head Block,Track, Paneagraph,Husk frame cab controls, Top Saw 36" and 56" Blade on Husk, Carriage & Track with T-Berry carriage Drive.

Frick 4 Head Block Carriage With Track & Carriage Drum Drive, Husk, Cab & Controls

Frick 3 HB carriage, track, husk, cab & controls

Frick Sawmill 4 Head Block Mounted on a drop deck trailer. Everything folds up for transport. Includes: Cummins motor

Parts machine log turner hydraulic power pack other parts

Frick Saw Husk with Top Saw

FRIULMAC MULIREX End Matcher W Stackable SpindlesEnd Matcher With Stackable Spindle for Fast-Change-OverEquipped with: -- Two Profiling Motors: 10 HP (7.50KW) -- Two Tool Changer Motors: 0.5 HP (0.25KW) -- Two Infeed/Outfeed Conveyor Belt Motors: 1.5 HP (1.10 KW) -- Central Conveyor Belt: 3/4 HP (0.55KW) -- Minimum Part Length: 4-7/8" (120mm) -- Minimum Part Width: 1-3/16" (30mm) -- Maximum Part Width: 9-7/8" (250mm) -- Minimum Part Thickness: 1/2" (10mm) -- Maximum Part Thickness: 1-3/16" (30mm) -- Minimum Cutter Diameter: 6-5/8" (170mm) -- Maximum Cutter Diameter: 7-7/8" (200mm) -- 50MM Diameter Spindles -- 11-1/4" (285mm) Spindle length under the nut for stackable tooling -- Cutter Speed 9,000 RPM -- Four 4-3/4" Dust Ports for each spindle(2 on the top and 2 on the rear side)

FRUILMAC RANDOMAT-E End Matcher;For end-matching flooring or cabinet & entry door rails; the feed-thru system allows continuous feeding of random-length parts with any kind of profile.Specifications: -- Width cap. of 1-3/16" to 9-7/8"; length cap. of 6-5/16" x 137" length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness capacity. -- Approx. (10) cycles/Min depending on part length & width; -- Feed system with (2) 120" long x 10" wide powered infeed & outfeed belt conveyors, parts are automatically fed & positioned with sensors, and a positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle is automatic. -- Parts are conveyed past the 1st & 2nd shaper head, automatically reversed, and positioned to a positive stop for the 2nd cut on the other end of the part. At the same time, the 1st shaper head would be coping the 1st end of another part.Equipped with: -- Twin 7.5 HP - 7,500 RPM high-speed shaper motors, which pneumatically traverse in tandem for each cutting cycle. -- Touch-screen SIEMENS Controller, PLC controlled conveyor & shaper cut cycle for automatic operation. -- Variable feed speed conveyor line; shaper head advance with led readout on the controls. -- Cutting station with overhead holddown wheels and 4-point pneumatic clamping with (2) overhead & (2) horizontal clamps.Includes:(4) set of used tooling

FRUILMAC RANDOMAT E - End Matcher; --÷For End Matching flooring or cabinet & entry door rails or tongue and groove. The feed-thru system allows continuous feeding of random length parts with any kind of profile.÷Capacity & Description: --÷ Width cap. 1-3/16" x 9-7/8'; length cap. 6-5/16" x 137" length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness cap. -- -- Approx. (10) cycles/Min depending on part length & width; --÷ Feed system with (2) 120" long x 10" wide powered infeed & outfeed belt conveyors, parts are automatically fed & positioned with sensors. --÷ Positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle is automatic. --÷ Parts are conveyed past the 1st & 2nd shaper head, automatically reversed and positioned to a positive stop for the 2nd cut on the other end of the part. At the same time the 1st shaper head would be coping the 1st end of another part. --Equipped with: -- -- Twin 7.5 HP - 7,500 RPM high-speed shaper motors which pneumatically traverse in tandem for each cutting cycle. -- -- Cutting station with overhead hold-down wheels and 4-point pneumatic clamping with (2) overhead & (2) horizontal clamps. --Controller & Operator Interface: Key Pad SIEMENS Controller, PLC controlled conveyor & shaper cut cycle for automatic operation, variable feed speed conveyor line, and shaper head advance with LED readout on the controls. --÷Includes Infeed and Outfeed Conveyors