Equipment For Sale

Wood-MIzer LT300 Cab W/Setworks Approx 4K Hours Mill alone or complete operation available Motivated seller

55hp diesel engine w/60hr. This always under cover very well maintained, includes a pedestal control station w/ fully proportional joystick controls allowing the operator to be positioned anywhere to control all hyd. head & bed functions hr. on control arm, debarker, Lube-Mizer, 6 box of blades. Call 423-405-8280 for more info.

Wood-Mizer Sawdust Conveyor

Wood-Mizer Rooftop Chain Conveyor 4 Strand Good Condition

Wood-Mizer EG100 #20380 - 220V single phase - 10 HP electric motor - Both extension tables - Probably around 1000 hours (no meter) - Speed knob is broken. Seller ran it by himself and it worked fine on slow speed. - Safety switch was disconnected as it kept tripping. Call 800-459-2148 for more info.

2002 Wood-Mizer Self centering 2 saw edger with trailing outfeed and vibrating deck and conveyor. Cap 2" - 48" Includes Morbark 3 knife chipper with extra new chipper knives. Edger and chipper combo with outfeed conveyor 40'. Call 800-459-2148 for more info.

2018 Wood-Mizer LT40 Wide Super Hydraulic - Fully Hydraulic - Wide increases max width of cut to 34" - Diesel engine with 1800 hours - Portable - Debarker (not connected) - Lubemizer - Fine Adjust Legs - Remote Operating Station - Cap: 36” log diameter, 21’ log length, and production up to 675 bf/hr. Call 800-459-2148 for more info.

2022 Wood-Mizer LT40HD Super. 40 total hours, 38 HP gas engine, debarker, Lube-Mizer, Laser kit, board return, This mill is fully loaded and basically new. Call or text 802-371-7590 for more info.

REDUCED TO SELL!! Wood-Mizer LT-300 W/ Infeed log deck, outfeed incline belt LT300, 3-way outfeed conveyor, includes extra blades, 9,400 hours - Wood-Mizer 24 x 19 belt outfeed conveyor and electric drive, S/N 10004089A2.00 - Wood-Mizer TD2D12 3-way separator, S/N 1004027A1.00 - Wood-Mizer 25.5’ (2) strand log infeed deck w/ hydraulic stop & load & hydraulic drive Complete mill (ref # 162) Call Amy for more information (928) 723-9449

1995, 2400 hr. 25 hp. Vanguard gas engine, all 12V, a new 12V motor for the debarker, 1.25" bands 30 extra band blades, 28"x16' cutting capacity, many NEW parts added, mill in use, in GOOD condition. Call 641-442-2517 for more info.

Wood-Mizer 12' (2) strand custom log deck, Excellent Condition (Rarely Used)... Contact Amy for more information (728)723-9449

6 Head Resaw with Auto Run-A-Round

HR500 Woodmizer 2hd Bandsaw. Located in NY. #C914

Woodmizer HR1000 Horizontal Resaw, very low hours. Asking $27,500

2004 Wood-Mizer LT40H Portable Sawmill - 1 owner - 28 HP Kohler gas engine with 5200 hours - Mill currently in operation - Debarker - LubeMizer - Extra loader cylinders, clamp cylinder and many other spare parts and blades - Shingle and Lapsider - Cook's Sharpener, Setter and Blade Straightener. - Road Ready Call 800-459-2148 for more info.

2001 Wood Mizer LT40 Super Hydraulic - Wood Mizer LT40 Super Hydraulic with re-saw attachment with setworks - Replaced the hydraulic motor for the re-saw and replaced the guides. - 25HP Electric Motor. - Road ready. - Can be switched to portable power - costs around $4000-$5000 from Wood-Mizer. Call 800-459-2148 for more info.

Wood-Mizer LT300 with enclosed cab and heat and air. 16' Log deck. Lumber Belt conveyor. Approx 50 new blades and 50 used blades. Manual/Parts book. Call 800-459-2148 for more info.

2021 Wood-Mizer KD250 KD250 Dehumidification Wood Kiln. Original owner. Less than 200 hours. - Capacity: 1,500 - 4,000 bd.ft. - Temp Range: 70° -120°F - Drying Time: - 1,500 BF 4/4 green pine (80% to 8%) in approx. 12 days - 4,000 BF 4/4 green oak (65% to 8%) in approx. 35 days - Electrical Requirements: - 220V / 60Hz Single Phase Call 800-459-2148 for more info.

Wood-Mizer LT40 Hydraulic Band Sawmill - Portable - Debarker - Lubemizer - Serviced in November 2023 - very little use - 2005 - CAT Diesel Engine 37 HP - 991 hours Call 800-459-2148 for more info.

New Razor Tip Carbide Blades for Wood-Mizer LT15 Box of 5 #BC3751587S) 0.045 x 1 1/4 x 158;7° Tooth Spacing: 7/8 Price is same as Wood-Mizer. Buyer pays for shipping. Call 800-459-2148 for more info.