Equipment For Sale

MLS Number 13265169 1990 GMC-White Volvo Semi-tractor 11.1 Detroit 300k on new crate engine 800k on truck 9 speed transmission Includes 1968 Phelan Lowboy 18' deck

2004 GMC Garbage Truck 373,716 miles Automatic Compactor does work

1999 GMC C7500 454 V-8 5 SPEED 16' DUMP BOX

GO FAST 2-Head Master 6 X 8 Resaw w/6" x 8" Cut Cap. Specifications: -- 15 HP TEFC motors, max. blade height 5-3/4" from conveyor belt x 8" wide; 20"; dia. bandwheels; self-contained hydraulic system with feed speed from 0 - 150 FPM, 6" wide feed belt conveyor and return; and top mounted holddown wheel. -- Complete with: -- Pneumatic blade tensioning system; heavy duty 2-7/16" arbor and bearings; easy crank for adjustable blade position; 3" right-side fences. -- Includes: -- Operator return table; 15'-1" x 1" wide bandsaw blades; 4" square dust chutes (square to round transitions available); Options available: -- Secondary hold-down wheel; outfeed speed-up roller; ripsaw fence attachments; & more.

Go Fast took this machine in on trade. It has been inspected and is in working condition. TWIN NXL Pneumatic Notcher - (2) 12” Diameter X 9” Wide Index-able Notching Heads - 0"- 2-1/2" Tall Notch Capacity - Up to 6” Material Width, 4” Material Height (Other Heights Available), Up to 112” Material Length (longer available) - Production: Up to 1750 Stringers Per Hour - Center boot quick adjust from 14” to 18” Wide via Hand Crank - Center boot adjustable from 10" to 22" Wide via with additional setup - Can optionally be used as a single head notcher for other center boot widths - Dual 2" Bore Tie Rod Air Cylinders for Clamps & Table - Heavy Duty 3/8” Thick Steel Table Top - Twin Top Clamps - 1-1/4" Linear Bearing Slide Assemblies - Air System Includes: Dual Hand Safety Controls, Lockout Valve, and Regulator - Operating Height: 37” - Dimensions: 120” L, 60” W, 51” H - Approx. Weight: 2650 lbs - (2) 20 HP Arbor Motors (230/480/3/60 TEFC) - Completely Pre-wired for 230V, Motor Starters with Start/ Stop Buttons and Circuit Overload Protection - Panel Face Mounted Rotary Disconnect - Panel Location: Lower Left Side - 96 FLA

Go Fast Pallet Notcher Double Head

New April 2024 barely used Go Fast MET-20 multi-end trim saw 44 FLA, 10 HP blade motors, 1 1/2 HP feed through motor VFD, includes 12" waste conveyor & 1/2 HP material take away, belt conveyor 12", 20" carbide tip saws - 2060 chain, material spec 12' long x 12" wide x 4 1/2" thick, mounted motor controls, Ref #204, Contact Jackie Kittrell 931-698-3342 Seller will load on your truck

15 HP Motor | ~2017 | 6x6 capacity

2022 GoFast Single head Resaw- only used 6 months! #00902

New April 2024 - Very low use Go Fast board deduster w/ side brushes, debur and board knocker, D3 Series 6" wide 1/4 - 2 1/2" thick boards, 5 HP 480 V (3) phase, 5 HP variable feed hydraulic self-contained, So new packing slip still attached, Ref #204, Contact Jackie Kittrell 931-698-3342

15 HP Motor | ~2017 | 6x6 capacity

Board Deduster

6x8 Resaw - ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity - 20” Band Wheels - Air Tensioned Blade Mechanism -1" Blade - 15 HP Motor (230/480/3/60 TEFC) - Completely Prewired for 480V - 18.1 FLA

Go-Fast double end trim saw, electric drive, 4" x 8' capacity, good working condition

GoFast 2-Head Resaw 10 HP main motors Go Fast Board Deduster

UpSTAK Board Stacker machine for sale. Includes unscrambler, 7.5HP Motor, 15 layers per minute package, 7' Outfeed, and HMI controls. CLICK ON VIDEO TO SEE MACHINE UP CLOSE.

2023 Go Fast 6x12 Resaw Has minimal use

Machine Details: • (2) 10” Diameter Steel Brushes (Side Sweeping), 3/8" – 2.5" Tall • (2) 6-1/4” Wide • 18” Minimum Length Capacity • Self-contained 5 GPM System • 10-Gallon Hydraulic Fluid Reservoir • Variable Belt Speed: 0–700 FPM • Machined Eccentric Press Cam Board Knocker • Adjustable Feed Belt Height: 27”–36” • Exit Pinch Roller Height: 34” • 5 HP Motor (230V 1PH / 60Hz TEFC) • Includes motor starters with start/stop buttons and circuit overload protection • 13.4 FLA • Dimensions: 90” L x 29” W x 59” H • Weight: 1,400 lbs

- (2) 10” Diameter Steel Brushes (Side Sweeping) - 3/8- 2.5" Tall, 2- 6-1/4” Wide, 18” Minimum Length Capacity - Self Contained 5 GPM System - 10 Gallon Hydraulic Fluid Reservoir - Variable Belt Speed 0-700 FPM - Machined Eccentric Press Cam Board Knocker - Adjustable Feed Belt Height: 27”- 36” - Exit Pinch Roller Height: 34” - 5 HP Motor (230/480/3/60 TEFC) - Completely Pre-wired for 230V, Motor Starters with Start/ Stop Buttons and Circuit Overload Protection - 13.4 FLA -Dimensions: 90” L, 29” W, 59” H - Weight: 1400 lbs

10HP Notchers available with 3 phase or single phase motors. Great for notching NEW wood stringers. The design is compact, low maintenance, and easy to operate. Notches up to 72" long material, extension kits are available. Profile Technology cutting heads. Units are typically in-stock. Manufactured in New London, WI. Dust Collection is recommended, but not required.