Equipment For Sale

The VORTEX® V18-32 has the largest infeed throat of any brush chipper measuring at 18 inches high by 32 inches wide .... 15% to 35% more chipping capacity than any in its class. This makes it suitable for multiple markets others can't handle. Tree care, municipalities, utility line maintenance, golf course management, and even light land clearing are all better suited to the VORTEX® V18-32 than others in its class. Hand fed or machine fed, the "oversized" opening makes feeding and operating best in class. While operators of other brands must "cut to the opening", VORTEX® V18-32 operators can process limbs, branches, and even small whole trees as-is, bringing truth to the statement of "less trim time" that others claim. Another feature of the VORTEX® V18-32 design is the ability to throw chips wet or dry, in ANY direction, with velocity unequaled by any other drum-style chipper in its class. This model matches and can even exceed the throwing capability of a disc-style chipper. Add in the revolutionary skinless-no pocket drum, you have the highest capacity, most productive machine in the 18-inch class available in today's market.

2013 Conehead 585 22" Whole Tree Chipper with 500hp John Deere Power Unit

22' Dynamic Action Vibrating Conveyor 5' Bottom No Motor and Drive

(1) 40' Piece with no drive So you could have an 80'conveyor Added to Drive section.

Dynamic Fan with 33" Inlet

Dynamic Fan with 33" Opening

DYNAPAC CA1500D Smooth Drum CompactorSpecifications: -- Smooth Drum: 66" -- Engine: 55 kW 75 HP @ 2200 RPM -- Operating mass (incl. ROPS) 15,500 lbs -- Operating mass (incl. Cab) 15,900 lbs -- Module mass (front/rear) 7,750 lbs/ 7,750 lbs -- Max. operating mass 18,700 lbs -- Fuel tank capacity: 50 gal -- Speed range: 8 / 12 / 12 km/hEquipped with: -- Seismic -- Hydrostatic hydraulic systems

Single Drum, Vibratory

Line Shaft Ready Triple Combination Table Saw/Band Saw/Router all in one.

97 Eager Beaver 55 Ton Detachable Tri axle with outriggers All cylinders replaced in the last year 50% average on 12 tires Includes 3 spare tires also about 50% 24' x102" well 14' x102" ramp and over axle platform Road ready Retiring

Eagle Beaver 16' Tandem axle Dove Tail with Pintle Hitch

50 Ton Low Boy

BROKEN AIR BRAKE LINE DROP DOWN RAMPS DUAL AXLE EAGER BEAVER 10-85 TRAILER SOLD AS IS WOOD DECK

The 36" Eagle dust blower is an efficient solution for various industrial cleaning needs. This used blower, manufactured by Eagle, shows minimal signs of wear and is in excellent working condition. Despite being pre-owned, its performance remains reliable, making it a cost-effective choice for businesses seeking quality equipment without the expense of buying new. The blower's ample 36-inch size makes it suitable for large-scale dust removal tasks. It is engineered to deliver powerful airflow, aiding in the efficient clearing of dust and debris from workspaces. With its sturdy build quality, this blower is designed to withstand the demands of regular industrial use, ensuring long-term service. For those in need of an industrial-grade blower that combines performance with affordability, this used 36" Eagle model is a prudent option. Its operational efficiency and durability make it a desirable choice for maintaining clean and safe working environments.

Eagle Claw saw bits, 9/32", these are comparable to the Simonds dominator, call if you have any questions

Maximum Assembled Product Size: 37.5” x 98” Minimum Assembled Product Size: 11.375” (vertical) x 9.75” (horizontal) with spacer blocks 7.5” (vertical) x 5.5” (horizontal) Maximum Framing Width: 4” Minimum Framing Width: 1.5” Tubular Steel Frame THK Linear Bearings and Rails (1) Allen Bradley Compact Logix PAC (4) Allen Bradley Kinetix Servos and Drives a. (1) Vertical Beam b. (1) Horizontal Beam (2) On the Upper Right Hand Clamp to ensure that uniform pressure can be applied regardless of the cut accuracy of the frame parts (1) Hoffman Upright Enclosure Allen Bradley Control Components (Push Buttons, Relays, Power Supplies, Buzzer, etc.) (1) Hoffman Air Conditioner for Electrical Enclosure EMS Press Control/Server Communication Software Package (4) Tregarne Woodwelder with Production Gun

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! Fully custom enclosed trailer with two rows of floor hook ups and one row of wall hook ups on each side. Air unit and RV hook ups.

Eagle 4 Stringer Pallet Nailing Machine 36'x 36" To 48"x 48". Polar Air 20HP Air Compressor w/ Matching Dryer & 2 Air Reciever Tanks.

Eagle’s Pack 720 PRO delivers superior contaminant detection of large packaged products at high-line speeds. It has a detection coverage of 720 mm (28.3";) at the belt and is capable of high-speed imaging up to 76 meters per minute (250 FPM). With the use of a bar code reader, the x-ray machine can run mixed cases for complete inspection. It is also capable of multilane inspection which enables manufacturers to inspect multiple lanes of the same or dissimilar products, or alternatively use one lane for production and the other for rework. The Pack 720 PRO is simultaneously capable of performing following inline quality control checks: Contaminant detection Mass measurement Package integrity Component countTechnical Specifications:(27.9″) wide at the belt, 375 mm (14.7″) wide at the top of aperture; 381 mm (15″) overall height --15″ TFT color touch screen; Windows 10 Enterprise LTSB with Eagle SimulTask™ 4 PRO Control & Imaging Software; TeamViewer™ service tool for remote machine diagnostics & product set-up services --762 mm (30″) wide belt by 1829 mm (72″) long with no reject; 2743 mm (108″) long with 1 reject -- XRAY Power Single vertical beam; 140W (140kV, 1mA); 420W (140kV, 3mA); 420W (84kV, 5mA)

EARTH CARE PRODUCTS, INC. 10½ Ft. x 32 Ft. Triple-pass Rotary Drum Dryer System with Gas Burner;Complete with the following major components: -- 10.5 Ft. x 32 Ft. (despite the model DB-1030) Triple-pass Insulated drum. -- Trunnion Bases, and 30 HP Drum Drive. -- High efficiency Cyclone, Cyclone outlet Airlock. -- 100 HP Dryer Main Fan, and Ducting. -- 25 MM BTU Gas Burner complete with Refractory Lined Furnace and Gas Train. Notes: &#9679 The Trunnion Tracks and Trunnion Wheels are in good condition as is the drum interior. The system was renovated in 2015 and not used much after the work was done. &#9679 The equipment is still in-place.