Pallet Chief For Sale

BLUM - Mini Press: Hinge Borer -- Tabletop "Mini Drill" unit for BLUM Hinge Boring; 1.5 HP (1.1 kW) - 2,450 RPM drill head assembly for hinge cup boring. -- Head assembly rotates for several hinge & drawer system boring patterns; pneumatic drill cycle with air blow-off. -- Includes: 48" x 24" Tabletop. -- Machine also used for line boring by purchasing an auxiliary BLUM spindle head; not included. Complete with: 3-Drawer mobile storage base for all hinge components.

2 available

MLS Number 12171481 BM&M 12X20 Chip Screen Rebuilt with new bottom pan Rebuilt motor and new belts Main bearing tested good Screen size buyer option A new bearing can be installed at an additional price.

MLS Number 13495390 BM&M 8 x 10 2 Deck Chip Screen Owner purchased the screen but never installed in the mill. Screen is still wrapped in shipping plastic.

BMT B 700 Pin Router referbished in 2010

BOARKE - BKM-43103RRK: (3) Head 42″ Wide Belt Sander (3 NEW Drums)43" Width cap.: Drum, drum, platen.Head Configuration1st Head: 30 HP; 10″ Helical grooved drum.2nd Head: 25 HP; 10″ Helical grooved drum.3rd Head: 20 HP; Helical grooved (idler) with a platen. Specifications -- 42″ Width capacity; 5″ height capacity running. -- 43″ X 103″ Abrasives. -- 1st Head: 30 HP; 10″ helical grooved drum. -- 2nd Head: 25 HP; 10″ helical grooved drum. -- 3rd Head: 20 HP Helical grooved (idler) with a platen. -- 1st & 2nd Heads: Dial indicators to dial in abrasives; has optional 5 HP vacuum feed bed.Equipped with & Features: -- Feed: Variable from 7 - 45 FPM via a 2 HP motor; VFD for speed control. -- Feed Mat: Thick; with usual crazing, but plenty of life. -- Elevation: Handled by a 1/2 HP motor. -- Machine includes: Digital readout; touchpad control combined with auto thickness calibration unit on the right.

BOARKE (HOLZ-HER) - BKM-37RK2: 2-Head Wide Belt Sander37" Width cap. Drum & Combination Head.Head Configuration1st Head. Rubber-covered contact roll; 6-1/4" dia.; 20 HP motor.2nd Head. Combination head with: 6-1/4" Dia. rubber covered contact roll (50-Shore); 3-1/8" wide finishing platen; 15 HP motor.Specification -- Abrasive belt size: 37" x 75". -- Air tensioning & electronic abrasive belt tracking. -- Conveyor belt feed with: 2 HP Variable feed drive. -- 9 - 45 FPM Feed speed with inverter.Equipped with & Features: -- Infeed & outfeed rubber covered holddown rollers. -- 1/8" - 7" Max. motorized thickness opening. -- LED Readout thickness. -- Part "over-thickness" protection. -- Automatic conveyor belt tracking. -- Emergency stop button. -- Motor load meters. -- Magnetic controls.NOTE: Very clean machine; low hours: Only ran prototypes; replaced with 3-head machine for production.

Manufacturer’s Specification ( to be confirmed) - With its powerful 3 HP motor can delivers the performance professional demand. - Coupled with an industrial quality eccentric oscillation mechanism that delivers more efficient sanding, less tendency to burn and less belt loading. - Heavy duty spring system allows easy adjustment for the front aluminum table for full use of the abrasive surface. - Aluminum auxiliary contour table allow use of 4” idler roller as a drum sander. - 9” Dia. Drive drum, 4” Dia. Idler drum. - 9-1/2” x 48” cast iron platen with graphite pad. - Rugged bearing – assisted belt torsion devise.. - Aluminum table travels 8” and tilts – 5 to 45 degree. - Dual 4” dust ports. Belt speed: 4200 RPM - Sanding belt oscillate distance: 1/4” (6 mm) Motor5HP / 220V / 60Hz Belt Size230 x 3520mmn Frint Table Size (L x W)1210 x 300mm Dust Port 4”

37” Capacity single head 230 volt 3phase

Boarke 43" 2-Head Sander

Bob Hanna Double Head Notcher -The notcher has been in production -Replaced electrical -Replaced Bearings and anything that was needed to make the machine run flawlessly -Production rate is 1 notched stringer per second -Hard to find and extremely reliable

Bob Hannah Board Chamfer

BOBCAT T-595 Compact Track LoaderAll the material-handling performance and attachment versatility you need to accomplish more is ready for your command.Specifications: -- Rated Operating Capacity (ISO): 2,100 Lbs -- Operating Weight: 7,822 Lbs -- Ground Pressure (Rubber): 5.1 PSI -- Auxiliary Std Flow: 17.1 GPM -- Auxiliary High Flow: 26.7 GPM -- Engine Cooling: Liquid -- Engine Fuel: Diesel -- Horsepower: 74 HP -- Hours: 1200Equipped with: -- Turbo Diesel Engine -- Rubber Tracks -- Keyless Coded Access -- Pilot Controls -- Standard Hydraulics -- Standard Bucket -- Joystick Control -- Backup Alarm -- Operating Lights -- Suspension Seat -- Engine Shutdown -- Bob-Tach Attachment System -- Top Window -- Spark Arrestor Muffler

BOBCAT T770 Compact Track LoaderThe Bobcat T770 is a compact track loader known for its high lift capacity, powerful breakout forces, and ability to handle diverse tasks.Specifications: -- Diesel Engine: 92 HP / 2400 RPM -- Number of cylinders: 4 -- Operating Capacity: 3,475 Lbs -- Operating Weight: 10,515 Lbs -- Track Size: 18" -- Track Remaining: 100%Features: -- Enclosed Cab with AC/Heat -- Cushion suspension seat Lift arm support -- Automatically activated intake air heater -- Work lights, front and rear -- Auxiliary hydraulics: variable flow/maximum flow Parking brake Bob-Tach frame -- Bobcat Interlock Control System (BICS) -- Turbo-charger with approved spark arrestor

Bobcat skid steers Believed to be mid 70s Parts machines 2 available Make offer

BOBCAT E88 R2-Series Compact ExcavatorBig performance in a compact machine with its redesigned engine, optimized lift performance.Specifications: -- Engine: Tier 4 65.4 HP (48.7 kW) -- Engine Type: Turbo Diesel -- Fuel Capacity: 30.6 gal. (115.8 L) -- Dig Depth: 177.0 in. (4496 mm) -- Reach at Ground Level: 265.5 in. (6743 mm) -- Hours: 275Equipped with: -- ROPS Enclosed -- Air conditioning and heat -- Keyless Start -- Pattern Changer -- Auxiliary Hydraulics -- Quick Attach -- Hydraulic Thumb -- Backfill Blade

Bobcat Mulcher M#FRST CT TR FRC50, Double Carbide, 62 Wide, 2200#

2014 Bobcat S630 Skid Steer Engine Gross Power 74hp Aspiration Turbocharged Operational Lift Arm Path Radius Fuel Capacity 24gal Max Speed 7.1mph Loader M2-Series Operating Load Rating 2,180lb Tipping Angle 4360 degrees Auxiliary Std Flow 23 gal/min Auxiliary High Flow 30.5 gal/min Operational Weight 7610lb Length With Bucket 1.14ft in Width Over Tires 6.01ft in Height To Top Of Cab 6.78ft in Wheelbase 3.78ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Bobcat T870 Hi-Flow -838 hours -Brand new wide zig zag tracks -Forestry Package -Enclosed cab with heat and A/C -Joystick with 2 speed -Standard and hi flow -Power quick attach -Self level bucket -Reverse fan -Deluxe screen with keyless start -Air ride seat -Foot throttle