Pallet Chief For Sale

1995 Morbark 1000B -Reman jd engine(6500hrs) -Joystick controls -Saw hook ups -Live heel -Many new hoses -Tight turn table -Radio -Heater

Morbark Grinder with New Discharge Chain, Spare Hyd Pack and Parts. Grinder and Core are 3 years old. Frame Is A Little Older But Same Model.

Morbark S/N 8469 25' log trough conveyor w/ 3-arm 2-way hydraulic log kickers and hydraulic drive

2009 Morbark 30/36 Tree Chipper -1045 Original hours -C13 440 HP -A/C blows cold -Clean tight chipper

1998 Morbark 1300 Tub Grinder -9000 hours meter doesnt work but has original ecm can read it -Loader -Few minor leaks -Mill in great shape -Augers are freshly hard faced -Belts in good shape -New injectors -Comes with an extra set of new hammers and tub rollers -A/c blows ice cold

2017 Morbark 50-48 Drum Chipper -6590 hours -Tight and dry -Well maintained -Just spent 100k on feed chains new chute and much more Does not need a thing

Morbark Rosserhead Debarker Model 636

2006 Morbark 6600 Horizontal Grinder, one owner. 91,440 lbs. Length: 44'11" in transport Height: 13'6" in transport Width: 11'10" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Pintle Hitch 4800 Hours Year To Be Confirmed

2019 Morbark 40/36 Drum Chipper -1500 hours -C-18 CAT -Deleted -Clean Unit

1994 Morbark Model 1200WCL Tub Grinder, Caterpillar 3412 Engine, hours unknown, Joystick Controls, Square Wear Plates, Enclosed Cab with Heat, Clutch replaced recently, 4" Screen and 2" Round Secondary Screens. Length 36 ft 0 in Width 11 ft 11 in Height 13 ft 6 in Weight 50,020 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Morbark 6600 Wood Hog Horzontal Grinder, Cat C32 with 8400 hours, Parked it 6 months ago. It ran until it was parked. Remote works. Known issues: Needs muffler Needs pto O ring Under side of yoke needs to be cut out and new plate put in. It ran till the day they cut it off so I’m sure they can get it running fairly quick. Needs a good amount of welding work under the yoke and around the mill. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Morbark 4600XL Horzontal Track Grinder, Cat C27 with 7,500 hours, Magnetic Head Pulley, Radio Remote. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Morbark 6600 Track Horzontal Grinder, Cat C32 1200 hp with 10,022 hours, Radio Remote, Magnetic Head Pulley. Work done. 5/23 fan pump replaced $8000 6/22 poclain feedwheel motor replaced. $20,000 4/24 Fan bearing replaced. $2000 5/24 yoke cylinders rebuilt. $500 5/24 new belly belt and all new parts associated with except the pulley drum. Shaft, b-locs and bearings replaced. Also metal siding and skirt. $8-10,000 6/24 2 new turbos. $12,000 6/24 new fan motor and side load adapter. $6500 6/24 feedwheel bearing replaced. Possibly shaft. $1500 6/24 discharge bottom bearings replaced Work done to infeed floor. Belly belt motor rebuilt. 3 injectors have been replaced. 2 out of 3 wiring harnesses replaced. Rebuilt fan motor. Has newer grates. (2) 8” hex. (2) 7x16 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Morbark 58" 3K Chipper w/150Hp 1725 RPM Motor

628 Morbark Debarker (for Poles) with chop-to-length system and sorter. Located in SD. #C947

1993 Morbark Model 1200 Tub Grinder, Equipped with a Cummins 650 HP Engine, Autofeed, Wireless Control, New Clutch 1 year ago, Hours are Unknown, New Turbo, New Injectors 300 Hours ago, Ready to Work. Weight 55,622 lb Length 38.15 ft Width 11.9 ft Height 12.8 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Morbark 3400XT Wood Hog Horizontal Grinder CAT C18, 765 Hp engine Approx 2100 hours New belly belt/skirting; Rebuilt mill Engine has new cylinder sleeves with rod & main bearings, purge pump & hydraulic fan motor (replaced by manufacturer due to a defect) Remote Magnet 1” & 5” screens Great machine and ready to go to work

Morbark 16' Outfeed Trough with 3 arm Kicker & Hyd Drv.

2006 Morbark 6600 HG Rebuilt CAT 1000 Hp engine Approx 2100 hours Magnet Great for processing pallets, brush, green waste & more