Pallet Chief For Sale

Montgomery Hydraulic Pack, no drive, good condition

6' x 20' Dip Tank Coated Steel with Hydraulic Power Unit & Lifting Arm.

Moon's Band Saw Sharpener

Moore 27' x 12" Belt Conveyor with S Drive Electric Motor & Gear Box S/N P-712-190

2018 Morbark M12R chipper, 12" capacity chipper, 89 HP GM gas engine, live hydraulic pump, auto feed, twin crusher cylinders, hand crank swivel discharge, excellent tires, new knives, fresh service, ONLY 410 hours! Gross Weight (approximate): 6,400 lbs Length: 13'9" Width: 6'3" Height: 8' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Morbark Rosserhead Debarker Model 636

Morbark 58" 6 Knife Chip Pack

2024 Morbark 1821 Eeger Beaver Wood Chipper, 165hp Ford Gas Engine with 69 hours, Winch, Lift Cylinder, Hydraulic Turn Discharge, Like new with Warranty, Excellent condition. Weight 8,900 lbs Height 8'11" Width 7'3" Length 18'1" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1996 Morbark 1200 -CAT motor approximately 3500 hours -Motor was replaced at 7000 hours -Engine runs great -Rollers and the Chain that turns the Tub need some work -Have the rollers for it Budget Grinder !!!!

2017 Morbark 6600 Horzontal Grinder with 7,600 hours, Cat C-32 Engine, 1050hp, 5th Wheel, Radio Remote, Magnetic Head Pulley. Weight: 91,440 lbs. Length: 44'11" in transport Height: 13'6" in transport Width: 11'10" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 Morbark 6600 Horizontal Grinder, Cat C32 1200hp with 5,596 hours, Radio remote, Magnetic head pulley. Weight: 91,440 lbs. Length: 44'11" in transport Height: 13'6" in transport Width: 11'10" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Morbark 1300 Tub Grinder, Cat C27 1050hp with 7,400 hours, Air Compressor, Loader, Magnetic head pulley. Weight 88,000 lbs Height 13' 6" Width 11' 11" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Morbark MXG42 Wheeled Stump Grinder, 399 Hours.

2012 Morbark M18R Drum Chipper, 200 HP John Deere with 4,900 hours, Hydraulic front jack and discharge chute, 5000lb winch, Manual rear outriggers. Gross weight: 11,000 lbs Length:21 ft 2 in Width:7 ft 7 in for single or tandem axle, 8 ft 5 in for single axle dual wheel Height:9 ft 6 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Morbark 40/36 Whole Tree Chipper, 600hp Deere with 8994 hours, A3 Drum, Light package, Remote, Rear stabilizers. Length 37'5" Height 12'4.25" Width 8'6" Weight 52,500 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1998 Morbark Mountain Goat 30/36,Whole Tree Chipper, has a Caterpillar 575 HP, 325 Undercarriage Which is 80-85%, Enclosed Cab with Heat and AC, New Updated Drum with 1.000 Hours, Morlift 250. Loader, Rebuilt Pumps, New Hydraulic Pump, Hydraulic Oil Cooler and Fan, Ready for the Woods. Length 31' 6" Height 12' 5.5" Width 8' 5.25", weight 36,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2000 | 6" – 40" diameter capable | Includes 3-strand log infeed deck w/stop and load, log infeed trough, debarking center w/cab & controls, bark removal system, log outfeed trough w/3 arm kicker. MIT-SA Carousel block cutting saw w/ belt

The Morbark 950 Tub Grinder is a reliable choice for handling your grinding needs, equipped with a powerful Cat C8.8 engine. With 3525 hours of operational use, this unit has been maintained in good working condition, offering efficiency and reliability for a range of applications. Ideal for industries requiring heavy-duty grinding capabilities, the Morbark 950 is designed to handle various materials efficiently. This used grinder provides excellent value for money, with a recently reduced price enhancing its appeal. It's a dependable machine for professionals seeking quality and performance in their operations.