Pallet Chief For Sale

General Motors Power Takeoff Unit Detriot Diesel #5136548

2004 GMC C4500 Duramax diesel 146k miles Airbag suspension New injectors New fuel pumps 11R22.5 tires BW gooseneck hitch Stereo system Road ready Two trailers available

2004 GMC Garbage Truck 373,716 miles Automatic Compactor does work

1993 GM with Prentice 180d Loader -8.2l engine with automatic transmission -6059 JD engine in loader (3000 hours) -Road worthy -Turntable tight and dry -60 inch Siro Saw Table

1999 GMC C7500 454 V-8 5 SPEED 16' DUMP BOX

MLS Number 13265169 1990 GMC-White Volvo Semi-tractor 11.1 Detroit 300k on new crate engine 800k on truck 9 speed transmission Includes 1968 Phelan Lowboy 18' deck

Machine Details: • (2) 10” Diameter Steel Brushes (Side Sweeping), 3/8" – 2.5" Tall • (2) 6-1/4” Wide • 18” Minimum Length Capacity • Self-contained 5 GPM System • 10-Gallon Hydraulic Fluid Reservoir • Variable Belt Speed: 0–700 FPM • Machined Eccentric Press Cam Board Knocker • Adjustable Feed Belt Height: 27”–36” • Exit Pinch Roller Height: 34” • 5 HP Motor (230V 1PH / 60Hz TEFC) • Includes motor starters with start/stop buttons and circuit overload protection • 13.4 FLA • Dimensions: 90” L x 29” W x 59” H • Weight: 1,400 lbs

2023 Go Fast 6x12 Resaw Has minimal use

6x8 Resaw - ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity - 20” Band Wheels - Air Tensioned Blade Mechanism -1" Blade -6" Fence -Air Holdover - 15 HP Motor (230/480/3/60 TEFC) - Completely Prewired for 480V - 18.1 FLA Custom Sheer Plate

6x8 Resaw - ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity - 20” Band Wheels - Air Tensioned Blade Mechanism -1" Blade - 15 HP Motor (230/480/3/60 TEFC) - Completely Prewired for 480V - 18.1 FLA

GoFast 2-Head Resaw 10 HP main motors Go Fast Board Deduster

Go-Fast double end trim saw, electric drive, 4" x 8' capacity, good working condition

2022 GoFast Single head Resaw- only used 6 months! #00902 More Photos Coming Soon!

The Go Fast Firewood Wrapper is the only industrial duty firewood wrapper available on the market today. This machine can wrap a bundle in under 12 seconds, making it the perfect solution for banding firewood bundles. The wrap is tensioned by a standard nut that ensures tight bundles and maximum wrap usage. Our firewood wrappers are simply better by design and unlike other manufacturers, we use high speed farm duty motors along with lubed bathed gear boxes. This allows us to get a higher amount of torque from our energy efficient 1/3HP motor. These components have proven themselves to outlast the light-duty, low speed motors that are commonly found on other firewood wrappers.

TWIN NXL Pneumatic Notcher - (2) 12” Diameter X 9” Wide Index-able Notching Heads - 0"- 2-1/2" Tall Notch Capacity - Up to 6” Material Width, 4” Material Height (Other Heights Available), Up to 112” Material Length (longer available) - Production: Up to 1750 Stringers Per Hour - Center boot quick adjust from 14” to 18” Wide via Hand Crank - Center boot adjustable from 10" to 22" Wide via with additional setup - Can optionally be used as a single head notcher for other center boot widths - Dual 2" Bore Tie Rod Air Cylinders for Clamps & Table - Heavy Duty 3/8” Thick Steel Table Top - Twin Top Clamps - 1-1/4" Linear Bearing Slide Assemblies - Air System Includes: Dual Hand Safety Controls, Lockout Valve, and Regulator - Operating Height: 37” - Dimensions: 120” L, 60” W, 51” H - Approx. Weight: 2650 lbs - (2) 20 HP Arbor Motors (230/480/3/60 TEFC) - Completely Pre-wired for 230V, Motor Starters with Start/ Stop Buttons and Circuit Overload Protection - Panel Face Mounted Rotary Disconnect - Panel Location: Lower Left Side - 96 FLA Will need dust chutes if not using with waste conveyor

- (2) 10” Diameter Steel Brushes (Side Sweeping) - 3/8- 2.5" Tall, 2- 6-1/4” Wide, 18” Minimum Length Capacity - Self Contained 5 GPM System - 10 Gallon Hydraulic Fluid Reservoir - Variable Belt Speed 0-700 FPM - Machined Eccentric Press Cam Board Knocker - Adjustable Feed Belt Height: 27”- 36” - Exit Pinch Roller Height: 34” - 5 HP Motor (230/480/3/60 TEFC) - Completely Pre-wired for 230V, Motor Starters with Start/ Stop Buttons and Circuit Overload Protection - 13.4 FLA -Dimensions: 90” L, 29” W, 59” H - Weight: 1400 lbs

2021 | 480V | Produces up to 800 Stringers Per Hour

3 Head | 6x8 Resaw Model | 480V

New April 2024 - Very low use Go Fast board deduster w/ side brushes, debur and board knocker, D3 Series 6" wide 1/4 - 2 1/2" thick boards, 5 HP 480 V (3) phase, 5 HP variable feed hydraulic self-contained, So new packing slip still attached, Ref #204, Contact Jackie Kittrell 931-698-3342

New April 2024 barely used Go Fast MET-20 multi-end trim saw 44 FLA, 10 HP blade motors, 1 1/2 HP feed through motor VFD, includes 12" waste conveyor & 1/2 HP material take away, belt conveyor 12", 20" carbide tip saws - 2060 chain, material spec 12' long x 12" wide x 4 1/2" thick, mounted motor controls, Ref #204, Contact Jackie Kittrell 931-698-3342 Seller will load on your truck