Pallet Chief For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 131 of 482
9626 Results Found
Sort By 
$ 30,000

It has a C 12 engine Ready to go to work! Call today!!!

 Livingston, TN
Big Iron Equipment Sales, LLC
931-397-1728
Call

Call for Price

Call for Price

Frick Timber-Tiger 10" Double Arbor Gang Rip Saw 36" opening includes 15' shifting infeed with 10" ladder back chain. (2) 300hp 1775 RPM electric motors

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 37,500

1980's Frick O1C Circular sawmill -2 saw 50 H,P Vertical edger -150 H.P electric motor -Deck is a 4 strand 25' Melot and Turner -Carriage has 4 Head Blocks with air dogs and tapers. -Mill is disassembled and ready to move now. Will have machinery on site to load mill up.

Josh Digirolamo
828-302-7264
Call

Call for Price

Parts machine log turner hydraulic power pack other parts

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Frick Saw Husk with Top Saw

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 8,500

Frick 00 Sawmill 4 head block 471 Detroit (missing radiator) 4 saws Steel track New wheels and bearings Needs some work

Mitch Stevens
828-773-6986
Call

$ 23,500

Josh Digirolamo
828-302-7264
Call

Call for Price

Frick Sawmill 4 Head Block Mounted on a drop deck trailer. Everything folds up for transport. Includes: Cummins motor

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Frick 38" 4 Head Block,Track, Paneagraph,Husk frame cab controls, Top Saw 36" and 56" Blade on Husk, Carriage & Track with T-Berry carriage Drive.

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Frick 3 HB carriage, track, husk, cab & controls

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Frick 4 Head Block Carriage With Track & Carriage Drum Drive, Husk, Cab & Controls

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Frick Gang Edger (no motor) 636 S/N 160 with Gang of Blades.

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 38,000

The Complete Frickco Circle Mill is a reliable circular sawmill, ideal for various lumber processing needs. It features a Mellott log deck with a stop and unloader, equipped with a #5 turner, and a track and hydraulic drive for efficient log handling. This mill comes with a 4-dog carriage featuring air dogs and drive, and an electric setworks to facilitate precise cutting operations. The husk on this mill is equipped with a 56" blade, accompanied by a top saw and slab belt, ensuring capability to handle large logs effectively. The package includes essential accessories like pulleys and belts, and it comes with a Frick 2-saw edger, complete with a roll case for streamlined edging tasks. Powering the system is a robust 150 HP motor, complete with a starter, providing the necessary torque and energy efficiency for demanding operations. This comprehensive setup offers a ready-to-go solution for those in need of a well-established and effective milling operation.

Showcase Equipment
260-250-4645
Call

$ 21,500

FRUILMAC - RANDOMAT E: End MatcherFor end matching flooring, cabinet & entry door rails, or tongue & groove. The feed through system allows continuous feeding of random length parts with any kind of profile. -- Capacity & Description -- Width cap.: 1-3/16" x 9-7/8'; Length cap.: 6-5/16" x 137" (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness cap. -- Approx. (10) cycles/Min depending on part length & width. -- Feed System with: (2) 120" Long x 10" wide powered infeed & outfeed belt conveyors; parts are automatically fed & positioned with sensors. -- Positive stop to the 1st vertical shaper head (2nd shaper head is next to the 1st one); cope cycle is automatic. -- Parts are conveyed past the 1st & 2nd shaper head; automatically reversed & positioned to a positive stop for the 2nd cut on the other end of the part. - At the same time, the 1st shaper head would be coping the 1st end of another part.Equipped with: -- Twin 7.5 HP - 7,500 RPM high-speed shaper motors, which pneumatically traverse in tandem for each cutting cycle. -- Cutting station with: Overhead holddown wheels; 4-point pneumatic clamping with: (2) Overhead & (2) horizontal clamps. -- Controller & Operator Interface: Keypad: SIEMENS Controller; PLC controlled conveyor & shaper cut cycle for automatic operation; variable feed speed conveyor line; shaper head advance with LED readout on the controls. -- Includes Infeed & Outfeed Conveyors

Louis Sicotte
800-374-5009 ext:329
Call

Call for Price

FRUILMAC - RANDOMAT-E: Random Length End MatcherFor end matching flooring or cabinet & entry door rails; the feed through system allows continuous feeding of random length parts with any kind of profile.Specifications -- Width cap.: 1-3/16" - 9-7/8"; length cap.: 6-5/16" x 137" length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness capacity. -- (10) Cycles/Min (approx.): Depending on part length & width. -- Feed system in/out with: (2) 156" Long x 11" wide powered infeed & outfeed belt conveyors; parts automatically fed & positioned with sensors; positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle: Automatic; driven by (2) 1-1/2 HP motors. -- Parts: Conveyed past the 1st & 2nd shaper head; automatically reversed; positioned to a positive stop for the 2nd cut on the other end of the part. - At the same time, 1st shaper head would be copying the 1st end of another part.Equipped with: -- Twin 7-1/2 HP - 7,500 RPM high-speed shaper motors, which pneumatically traverse in tandem for each cutting cycle. -- Touchscreen SIEMENS Controller; PLC controlled conveyor & shaper cut cycle for automatic operation. -- Variable feed speed conveyor line; shaper head advance with led readout on the controls. -- Cutting station with: Overhead holddown wheels; 4-point pneumatic clamping with: (2) Overhead & (2) horizontal clamps.

Louis Sicotte
800-374-5009 ext:329
Call

Call for Price

FRIULMAC - Dual Feed: Double End Cut-Off SawFor squaring the workpieces and for transportation to a Planer or Moulder with a straightening table. -- 59" Max. (1,500 mm) opening from Saw to Saw; motorized opening with LED readout on the control panel; left hand fixed with left-hand fence line. -- Hopper Magazine, material capacity: Min. length 7.87" (200 mm); max. 59" (1,500 mm); width 1-1/8" (30 mm) to 4-3/8" (110 mm); thickness 0.59" (15 mm) min.; up to 2-3/8" (60 mm) max.; hopper stack height: 23-1/2" (600 mm).Each side equipped with: -- (2) Trim saw motors: 5.36 HP Each; saw blade dia. 9.84" (250 mm). -- Hydraulic feed drive unit with: 3 HP (2.2 kW) Motor. -- Trimming & throughput capacity: Up to (40) pieces per minute..

Louis Sicotte
800-374-5009 ext:329
Call

Call for Price

Friulmac Rondamat E End Matcher

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

FRIULMAC - Dual Feed: Double End Cutoff SawFor squaring workpieces and for transportation to a Planer or Moulder with a straightening table. -- 59" Max. (1,500 mm) opening from Saw to Saw: Motorized opening with LED readout on the control panel; left-hand fixed with left-hand fence line. -- Hopper magazine - material capacity: Min. length: 7.87" (200 mm), max. 59" (1,500 mm); width 1-1/8" (30 mm) to 4-3/8" (110 mm); thickness 0.59" (15 mm) min., up to 2-3/8" (60 mm) max.; hopper stack height: 23-1/2" (600 mm).Each side equipped with: -- (2) Trim saw motors: 5.36 HP each; saw blade dia.: 9.84" (250 mm). -- Hydraulic feed drive unit with: 3 HP (2.2 kW) motor. -- Trimming & throughput capacity: Up to (40) pieces per minute..

Louis Sicotte
800-374-5009 ext:329
Call

Call for Price

Friulmac Floormat EQ Double end TenonerEach side equipped with top & bottom trims and (1) cope heads.Capacity: -- 1,500 mm ( 59") Max. x 225 mm ( 8.86") min. opening; -- Width 30 mm (1.18"), 250 mm (9.84") -- Thickness: 10 mm (.39") min. 35 mm (1.38") max.Includes: -- Motorized opening with LCD touch screen on the control panel, -- Hopper feed Each side equipped with: -- 1st Head: Top scoring or trim saw, 4 HP motor, saw blade max 150 mm diam. with 30 mm bore, rotation 8,500 RPM. -- 2nd Head: Bottom scoring or trim saw, 4 HP motor. saw blade max 150 mm diam. with 30 mm bore, rotation 8,500 RPM -- 3rd Head: High speed Vertical cope head, 7.5 HP - 6,800 RPM, minimum tool diameter 160 mm, maximum 220 mm, arbor diameter 40 mm. -- Variable speed feed from 4 to 25 meter/min. -- SIEMENS "Simatic" Touch-screen control for most machine functions; important station adjustments with mechanical digital readouts; manual hopper feed with 9" max. width. -- Feed system with: Rubber top chain pads, overhead holddowns with continuous V-type belts.Complete with: -- Full safety sound enclosure and separate operator control console. -- Voltage transformewr for 460 volts (to be confirmed)

Louis Sicotte
800-374-5009 ext:329
Call

$ 60,000

FRIULMAC Quadramat Double End Tenoner:This machine is set up with (4) four profiling units left and right for a total of (8) eight -- 1,500 mm (59") Max. x 95 mm (3.7") min. opening -- Loading space 1,041 mm (41") -- Thickness 10 - 100 mm (0.4" to 3.9")Equipped With: -- Hogging/ Trim - Hogging/trim - Jump cope - Cope. -- Motorized opening with LED readout on the control panel, approx. 25" infeed in front of hold downs. -- Variable speed feed 6-28 M/min. , feed motor 4.5 HP -- Feed chain 2-7/8" wide with rubberized pads -- Top pressure with non-stainable stretching wheels driven by gear motor and inverter with speed adjustment synchronously to chain feeding speed -- Infeed fence on left side -- Machine left side fixed, right side adjustable -- Complete control panelWorking Stations: -- 1st station: Profiling unit J-33 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm -- 2nd station Profiling unit J-32 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm -- 3rd Station : Profiling unit J-33 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm -- 4th Station: Profiling unit J-32 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm NOTE: machine will require some rebuilding and maintenance in regards to ball screws and Dovetail Guides per statement by current owner. They are replacing it with a new machine.

Dan Wolters
800-374-5009 ext:376
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved