Northtech For Sale

NORTHTECH NT-610 HC TOP AND BOTTOM PLANER: --24" x 8" cap., min. material length 12". Table size is 111" x 24". -- 50 HP top and 40 HP bottom belt driven motors; --Minimum working length is 12" and minimum working thickness is 1/4". -- Variable feed speed 55 - 155 FPM powered by a 5 HP feed motor; 1 HP motor for table raise & lower and (4) ball screws. -- Both cutter heads are helical carbide insert knife heads, 6,000 RPM. MACHINE FEATURES: -- Rugged cast iron and plate steel fabrication. -- Overhead feed cnveyor with 1,100 individual spring loaded "feed fingers" to provide excellent feed characteristics. -- Computerized top cutterhead positioner is accurate to +/-0.001" -- Cutterhead tooling technology gurantees low noise, reduced power requirements, minimal operations cost and repetitive finish on the most difficutl hardwoods. -- Patented lifting column system (synchronized transmission) gurantees repetitive setup and long-term dependability. -- DP-525 Thickness Setting Unit --Patented universal drive transmission for feed groups and infeed carpet allows a maintenance free design verses chain drives. -- Cutterheads are solid steel construction, dynamically balanced and mated with precision pulleys. -- Cutterheads are supported by "NSK" class 7 precision ball bearings and prcision housings. -- Chromed beds, Guards and skirts for operator safety. -- Additional Specs: Machine dimensions: L2830 x W185 x H1700 MM; Weight: 9,000 lbs; Dust Collection: 3600 CFM

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i5z NORTHTECH NT-EV-920RC DUAL HEAD WIDE BELT SANDER 2-Head wide belt sanding machine with 37" capacity. - Heads: 1st head: 8-1/4" Dia. grooved rubber contact roll, with 20 HP motor. 2nd head: Combination finishing platen with grooved rubber roller and polishing pad, with 15 HP motor. Two (2) infeed and outfeed spring loaded hold-down rollers; 2 HP variable speed feed drive. Sanding belt size: 37" X 85" and with electronic belt tracking. Motorized opening between the conveyor and sanding bed. Ammeters for measuring motor loads.

2007 Northtech NT-CS14R-53 3 phase 460 volts 5 horsepower SN 07113 Operates good

NORTHTECH NT-EV-920RC Dual Head Wide Belt Sander2-Head Wide Belt Sanding Machine with 37" capacity. Specifications: -- First head 8-1/4" Dia. grooved rubber contact roll, with 20 HP motor. -- Second head: Combination finishing platen with grooved rubber roller and polishing pad, with 15 HP motor. -- Two (2) infeed and outfeed spring loaded holddown rollers; 2 HP variable speed feed drive. -- Sanding belt size: 37" X 85" and with electronic belt tracking. -- Motorized opening between conveyor bed and sanding heads. -- Ammeters for measuring motor loads. -- Includes spare abrasive belts.

NORTHTECH NT-KL-43-RC Wide Belt Sander (2) Heads;43" width cap. Drum, Combination Head.Head Configuration:1st Head: Rubber-covered contact drum with 25 HP motor2nd Head: Combination head with a rubber-covered contact drum and 2-1/4" wide finishing platen, 20 HP motor.Specifications: -- Thickness opening with PLC control, (DP-525 controller) keypad entry automatically adjusts to any thickness with LED readout. -- 37" x 75" Abrasive belts, TRU-TRAK solid state abrasive belt tracking. -- Variable feed drive 13 - 49 FPM, 2 HP motor. -- Endless belt conveyor, infeed and outfeed rubber covered pinch rolls. -- Complete with: 0" - 6" Automatic part thickness set up.Equipped with & Features: -- Infeed and outfeed rubber covered spring loaded holddown rolls. -- Feed emergency stops at infeed. -- Disc brakes on sanding heads, electrical interlocks on main access doors, and motor load meters. -- Note: Year of manufacturing has to be verified.

NORTHTECH - SRS-12 ...Straight Line RipsawSpecifications: --15 HP Motor, 1" dia. saw arbor, speed of 4,500 RPM, 8". -- Max. blade cap.: 12". -- Max. depth of cut: 3-5/16". -- Part length: 8" Min. -- Distance between saw & column: 18"; 60" W x 33" table. -- Feed & Chain: 2 HP Feed drive motor; variable feed speeds of: 59 - 72 - 91 - 111 & 137 FPM. --7" Wide double chain, with automatic chain lubrication.Equipped with & Feature: -- Top pressure system with (6) spring loaded holddown rollers. -- Double row antikickback fingers. -- Adjustable infeed fence. -- Safety side guard. -- 4" Dia. dust hood outlet. -- Push button controls. -- Magnetic starters. - Overhead post for laser mounting.

NORTHTECH Four (4) Head Lineal Brush SanderSpecifications: • Sanding Head configuration: 2 Top + 1 Opposing Right + 1 Opposing Left• Working width up to 12"• Working thickness range: 1/4" - 6"• Minimum working length: 30"• (2) Top 1.5 HP Sanding heads RPM are inverter controlled• (2) 1 HP Opposing side sanding heads RPM are inverter-controlled• 150/180 Grit setup included; other grits available upon request• (2) 1/4 HP feed motors with 25 - 105 feed speed range• (2) 5" top dust ports requiring 681 CFM @ point of extraction• (2) 4" Side dust ports requiring 436 CFM @ point of extraction• 230V or 460V 3PH 60HZ• Net / Gross weight: Approx. 1,056 Lbs / Approx. 1,300 Lbs• Approximate Machine dimensions (LxWxH): 59" x 52" x 67"• Tool box and Operation/Parts Manual included• Warranty is one-year parts

NORTHTECH NT-610HC TOP AND BOTTOM PLANER: --24" x 8" cap., min. material length 12". Table size is 111" x 24". -- 50 HP top and 40 HP bottom belt driven motors; --Minimum working length is 12" and minimum working thickness is 1/4". -- Variable feed speed 55 - 155 FPM powered by a 5 HP feed motor; 1 HP motor for table raise & lower and (4) ball screws. -- Both cutter heads are helical carbide insert knife heads, 6,000 RPM. MACHINE FEATURES: -- Rugged cast iron and plate steel fabrication. -- Overhead feed conveyor with 1,100 individual spring loaded "feed fingers" to provide excellent feed characteristics. -- Computerized top cutterhead positioner is accurate to +/-0.001" -- Cutterhead tooling technology gurantees low noise, reduced power requirements, minimal operations cost and repetitive finish on the most difficult hardwoods. -- Patented lifting column system (synchronized transmission) gurantees repetitive setup and long-term dependability. -- DP-525 Thickness Setting Unit --Patented universal drive transmission for feed groups and infeed carpet allows a maintenance free design verses chain drives. -- Cutterheads are solid steel construction, dynamically balanced and mated with precision pulleys. -- Cutterheads are supported by "NSK" class 7 precision ball bearings and precision housings. -- Chromed beds, Guards and skirts for operator safety. -- Additional Specs: Machine dimensions: L2830 x W185 x H1700 MM; Weight: 9,000 lbs; Dust Collection: 3600 CFM

NORTHTECH NT 25 RS-HA Finger JointerFinger jointer with (2) shapers and a press capacity of 6" wide X 20' long pressSpecifications: -- Northtech Finger Jointer System w/ Model NT-25LS-HA Left Shaper, NT-25 RS-HA Right Shaper, Glue System, and NT-20AH-HA Pressing Station -- Left Hand Shaper Unit includes 20 HP Shaper, 7.5 HP Saw Motor, 1 HP Bottom Scoring Motor, and a Pusher Cylinder to Send Parts Away -- Right Hand Shaper Includes 20 HP Shaper, 7.5 HP Saw Motor, and Top & Bottom Scoring Motors and Glue Application Head -- Shapers have 29" x 28" Tables -- 50 mm Diameter Shaper Spindles -- Maximum Length X Height of Workpiece 40" x 6" -- Minimum Length X Height of Workpiece 6" X 0.8"Model NT-20-AH-HA Finger Joint Press -- Pressing Length: 20' -- Cut-Off Saw to Cut Pieces to Length. Saw Motor: 3 HP -- Hydraulic Press Feed with 7.5HP Motor -- Pneumatic Top & End Pressure -- All Units Include Push-Button ControlsNote: Purchase used in 2022 after being cleaned and checked, now replaced with a larger system