Equipment For Sale

2018 Doosan DL250-5, Hydraulic Coupler, Aux Hyd, Bucket. Clean Machine.

DOOSAN DX300LC-3 Long Boom Hydraulic Crawler ExcavatorSpecifications: -- Engine Type: Doosan -- Horsepower: 213 HP (159 kW / 216 PS) -- Engine Cylinders: 6 -- Boom reach: 60' -- Track width: 33.5" -- Bucket Size: 72" Equipped with: -- Joystick Controls w/ Switchable Control Patterns -- Rearview Camera -- New Bushings & Pins in Bucket Knuckle -- Hours: Approx. 3,500 (still in use)

2011 Doosan 225DX Manuel thumb but is plumbed for hydraulic attachments UC is good (65-75%) Machine needs nothing Ready for the job site

2016 Doosan DX140LCR-5, Hydraulic Thumb, 36" Digging Bucket, 4320 Hours, Rubber Pads on Steel Tracks.

2017 Doosan DL250 Wheel Loader, 650 hours with scales. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

MLS Number 11411411 2016 Doosan DX300 LL Logging Processor 5967 hours Doosan 265HP Engine Forestry Cab with Hydraulic Tilt 28” DG pads on 80% Undercarriage Tight and Dry Very Good Condition SOUTHSTAR Processor Model QS600

DOOSAN portable lighting with only .2 hours.

2014 Doosan DX225LC Excavator with 4,800 hours. Length 32’ Height 10’ Width 10’ Weight 52,086 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

DOOSAN DL200-5 (US10) Wheel LoaderSpecifications: -- Engine Model: 1204F -- Gross Power: 142 HP -- Power Measured @ 2200 rpm -- Max. Speed - Forward: 24 mph -- Max. Speed - Reverse: 12 mph -- Fuel Tank: 45 galEquipped with: -- US10 Package -- GP Bucket -- Coupler

Aluminum Open Top, Spring Suspension, Aluminum Top Hinge Door, Aluminum Floor, 22.5 Tires Shurco Lock and Roll Tarp, Extruded Aluminum Top and Bottom Rail, Side Post on 16" Center Settings, Aluminum Prepainted White Sides, Front Ladder Same trailer with Slide tarp $41,900 Same trailer with Live Floor $69,900 Prices are plus FET LMI is your go to source for semi-truck trailers located in Waverly, Tennessee! We have been family owned and operated since 1980. We are North America’s largest stocking dealer of lowboy trailers. We are proud to be ranked #1 in New Trailer Sales for Pitts Trailers since 2009, Dorsey’s Top Dealer since 2015, Jet’s largest detach dealer, and Landoll’s Top 3 Dealer since 2019. Our inventory also includes new and used forestry, scrap, and material handling equipment and trailers, and we’re proud to be an authorized dealer for Barko, Robotec, CSI, and Demco. We also carry parts for the equipment lines we carry. Give us a call today and we will get your parts shipped out quickly. Need your purchase moved? We have a network of over the road trucks to get your trailer to you ASAP! Need your purchase financed? We offer financing options to fit your needs. We accept and welcome used trade-in trailers, as well as purchase used trailers. Our location stocks and install on-demand the following: toolboxes, ramp kits, chains, binders, straps, bungees, bulkheads, headache racks, tarps, sliding tarp systems, aluminum wheels, new and used tires, everything you would need for your flatbed, drop deck or lowboy. Check out our inventory online. If you don’t find what you’re looking for, contact us and we’ll help you track it down. We look forward to serving you!

Aluminum Open Top Live Floor, 48x102, Air Ride Sliding Tandem, Aluminum Rear Barn Style Doors, 22.5 Tires, Shurco Lock and Roll Tarp, Hallco 4000 Series Floor with 3/16 Slats, Extruded Aluminum Top and Bottom Rail, Side Post on 12" Center Settings, 12" Crossmembers, Aluminum Prepainted White Sides, Front Ladders Air Ride 45x102 $69,900 Spring Ride $69,900 Prices are plus FET LMI is your go to source for semi-truck trailers located in Waverly, Tennessee! We have been family owned and operated since 1980. We are North America’s largest stocking dealer of lowboy trailers. We are proud to be ranked #1 in New Trailer Sales for Pitts Trailers since 2009, Dorsey’s Top Dealer since 2015, Jet’s largest detach dealer, and Landoll’s Top 3 Dealer since 2019. Our inventory also includes new and used forestry, scrap, and material handling equipment and trailers, and we’re proud to be an authorized dealer for Barko, Robotec, CSI, and Demco. We also carry parts for the equipment lines we carry. Give us a call today and we will get your parts shipped out quickly. Need your purchase moved? We have a network of over the road trucks to get your trailer to you ASAP! Need your purchase financed? We offer financing options to fit your needs. We accept and welcome used trade-in trailers, as well as purchase used trailers. Our location stocks and install on-demand the following: toolboxes, ramp kits, chains, binders, straps, bungees, bulkheads, headache racks, tarps, sliding tarp systems, aluminum wheels, new and used tires, everything you would need for your flatbed, drop deck or lowboy. Check out our inventory online. If you don’t find what you’re looking for, contact us and we’ll help you track it down. We look forward to serving you!

1991 Dorsey open top walking floor trailer; swinging doors; spring ride; serial number 1DTV75W22MA200926

2018 Dorsey Trailer, Good tires, maintained well, located in Tazewell, VA Contact Zach for more information. Ready to hit the road. 931-224-0699

2013 Dorsey 45’ walking floor chip van trailer. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

DOUCET - 16-SECTION: Clamp Carrier (Hydraulic)Specifications -- (16) Sections; 8-1/2' width. -- (6) Clamps per section; (86) clamps total. -- 32" Clamp opening (rapid change) with: 2-1/2" High jaws.Complete with: -- 5 HP Hydraulic power pack and motor for rotation. -- Hydraulic clamp tightening. -- Pneumatic overhead panel flattener.NOTE: Tear down included!

DOUCET - 8-SECTION, ...Clamp Carrier (Hydraulic). -- (8) Sections, 8-1/2' width. -- (8) Clamps per section, (64) clamps total. -- 42" Clamp opening (rapid change) with 2-1/2" high jaws. Complete with: -- (1) Pneumatic fence w/manual valve. -- 5 HP Hydraulic power pack and motor for rotation. -- Hydraulic clamp tightening; mounted on rail. -- Pneumatic overhead panel flattener.Actual model is: SRH 08-8.5-64-42R.Note: Tear down and loading not included.

DOUCET SDM-M-30-72 Frame and Cabinet Door ClampDesigned for quick and accurate clamping & squaring of miter and regular cabinet doors.Specifications: -- 5-1/2" x 12-1/2" Min. door size, 30" x 72" max. door size. -- (1) Fixed vertical clamp, (2) mobile vertical clamps on roller bearings for effortless positioning. -- (1) Mobile horizontal clamp with a unique "gas spring" assisted lever for effortless centering; pressure is distributed with 4' dia. air cylinders. -- "Progressive Flow" clamping system @ 80 PSI; 675 Lbs of clamping pressure per clamp; operator working height adjustment.

DOUCET - DRAWER MASTER DWM-36: 36" Universal Drawer Box Assembly ClampSpecifications -- Assembles drawers with: Standard finger-type dovetails; sliding-type dovetails; bored & doweled drawers; tongue & dado box joints. -- Capacity: 10" H x 24" W x 36" L.Equipped with: -- Fixed left jaw, manually adjustable right jaw; Rapid set jaw opening. -- Double-acting pneumatic cylinders. -- 2-Hand push button operation. -- “Quick"; Mode & "Progressive Compression" mode; operates as a jog button to allow for easy fitting of bottom panel in lateral grooves.

DOUCET BT3-30-5-23-G-PT Return Conveyor for Edgebanders Specifications: Right-hand feed, with Left-hand return. Min. part size 4" x 12". Max. panel size (with operator assistance supporting then turning panels) 45" x 96". Equipped with: 1-1/2’ L Infeed roller conveyor section, with (5) 23-1/4” W & (2) 34-1/4” W Rollers. 34-1/4” W x 5-1/2’ L x 35” H Receiving table, with Automatic/Manual height adjustment 2". (8) 3/8” Dia. transfer belts, (3) on 3” Centers, (2) on 6” Centers, & (3) on 9” Centers. 29-1/2” W x 5-1/2’ L x 34” H Return table. 29-1/2” W x 18’ L x 34” H 3-Section Return conveyor, with 5-1/2” W x 6’ L Gravity roller conveyor side extension. All rollers 1-7/8” Dia. covered line shaft on 3” centers. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

Doucet MSP-CR-19-48-15-TRF-C-8-7 Conveyor