Mobile Wood Chippers For Sale

2018 Morbark M12R chipper, 12" capacity chipper, 89 HP GM gas engine, live hydraulic pump, auto feed, twin crusher cylinders, hand crank swivel discharge, excellent tires, new knives, fresh service, ONLY 410 hours! Gross Weight (approximate): 6,400 lbs Length: 13'9" Width: 6'3" Height: 8' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Morbark M18R Drum Chipper, 200 HP John Deere with 4,900 hours, Hydraulic front jack and discharge chute, 5000lb winch, Manual rear outriggers. Gross weight: 11,000 lbs Length:21 ft 2 in Width:7 ft 7 in for single or tandem axle, 8 ft 5 in for single axle dual wheel Height:9 ft 6 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Morbark 40/36 Whole Tree Chipper, 600hp Deere with 8994 hours, A3 Drum, Light package, Remote, Rear stabilizers. Length 37'5" Height 12'4.25" Width 8'6" Weight 52,500 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Morbark 50/48X -5,591 hours -Brand new wet clutch -New gearbox -New EGR Cooler -The drum has new knife holders, clamps, and bolts. -Comes with 5 sets of knives and 2 sets of counter knives Hours will rise as it is a working unit!!!!!!

2011 Morbark 40/36 Drum Chipper 7400 hours. John Deere 600 HP engine , It has been through shop completely. Width: 8'6" Length: 37'5" Height: 12'4.25" Gross weight: 52,500 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2002 MORBARK 30RXL WHOLE TREE CHIPPER ENCLOSED CAB WITH HEAT AND AIR CAT V-12 MORLIFT 1000 BOOM READY TO GO

MORBARK 27RXL WHOLE TREE CHIPPER BAD MOTOR V-12 CAT LOTS OF NEW PARTS DISC SHAFT BEARINGS DECK CHAIN AND SPROCKETS JUST WENT THRU CHIPPER AND MOTOR THREW A ROD LOTS OF NEW PARTS JUST NEEDS MOTOR

2016 Morbark Beever M12D 1,237 Hours Auto Feed 89hp Power Solutions International (PSI) 3.0L gas motor TorqMax Feed Wheel Compression System Hydraulic Lift Yoke Cylinder 53" Folding Feed Table 18" x 12" Throat Capacity Fully serviced with new fluids, filters, tires, wheels, knives, battery and rain cap 360 Degree Rotating Adjustable Chute LED lights

1992 Morbark Model 27 Whole Tree Chipper Cat V12 800 HP Engine Currently in production PRICE REDUCED

Morbark 30-36 Portable Chipper 350HP Cummins Approx 4000 Hrs self Feeding Grapple Up to 18" Dia Material

2008 MORBARK TYPHOON 20 CHIPPER -400 horsepower John Deere(rebuilt within the last five hundred hours) -new injectors and new injection pump new fuel pump -new head -new belts -hydraulic pumps -replaced all hydraulic valves -new brakes -all new fluids and filters -new paint chipper has remote control to that works -recently put on 12000 pound winch on back

1996 Morbark Model 20 Whole Tree Chipper ,Caterpillar 425 HP Engine, Enclosed Cab with Heat and AC, Needs a Condenser for the AC, Machine has Separator ,Ready for the Woods... Overall Length 21’6” Overall Width 8’0” Overall Height 13’6” Weight 10,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Morbark Flail 223 Debarker, has a Caterpillar 9.3 that's been deleted. It has 9,249 frame hours and 600 on the engine rebuild. New Hydraulic Clutch Last Year, New Rear Feed Wheels 23" Capacity Ready for the Woods. Length (transport) 33'5" Height (transport) 9'11" Width 9'10" Weight 46,700 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Cat 3412E 860hp Engine status report shows 43% average load factor, 3317 idle hours. 8899 hours on original engine. Completely serviced and runs properly. Morlift 500 loader with tight grapple, A/C cab all nicely fitted. Auxiliary air compressor Michigan model 40 knife grinder Extra knives Very sound, tidy chipper throughout. Call for complete condition report.

1050 HP C27 engine, Morlift 500, 3 flail with bark conveyor. Boom cylinder being repacked, one owner, rebuilt engine

1983 MORBARK RXL 27 TOTAL CHIP HARVESTOR 5,110 HOURS 600 CUMMINS UPDATED SPREAD BEARINGS RUNS GREAT WORK READY FINANCING AVAILABLE WITH NO MONEY DOWN GRANITEHE.COM

Rebuilt Deere 600HP engine, 6 pocket 3/4" chip drum. Wireless Remote

600HP, Advantage 3 drum, Wireless Remote, compressor, rebuilt turbo, serviced, nice machine for age

2021 Morbark 30/36 whole tree chipper -1884 hours -Cat Engine -Pintle hitch towed -Extra sets of knives and parts -Factory Engine warranty remaining PRICE REDUCED!!!!!!!

-400 horsepower John Deere(rebuilt within the last five hundred hours) -new injectors and new injection pump new fuel pump -new head -new belts -hydraulic pumps -replaced all hydraulic valves -new brakes -all new fluids and filters -new paint chipper has remote control to that works -recently put on 12000 pound winch on back