Mellott For Sale

Uknown Chop Saw End Feed Table

10' Heavy Duty Turn Table With Electric Drive

Portable Tire Shredder with: Grapple -- DETROIT Diesel motor. -- NOTE: Needs hydraulic hoses replaced.

10' Turn Table With Electric Drive

Paul Automatic Ripsaw Infeed

11' ENDWISE LOG TROUGH CONVEYOR W/LOG KICKER, HYD DR

Hyd power unit, 7 1/2 hp electric power, vane type pump, good condition

Several Lumber Carts

8x10Ft Auger W/HYD Drv

LOG TROUGH OUTFEED CONVEYOR W/LOG KICKERS

10' Skate Rollers Great for Tie Sorters Unknown Mfg.

24' ENDWISE LOG TROUGH W/CONVEYOR

UNTHA RS 30 QUAD SHAFT SHREDDERSpecifications: --Conveyor Brand Battery Recycling System 2,000 LB --UPENDER SCISSOR Lift Table HYDRAULIC Discharge Conveyor -- 30hp -- Auto Reverse push button controls -- Base support structure -- Feed Hopper -- Unique 4-shaft design & integrated screen process. -- Most materials in one pass, where other machines require multiple stages of processing

UNTHA RS40-1000-37 QUAD SHAFT SHREDDER -- 1000 mm (39") cutting chamber -- (2) 30 HP motors -- 480 volts UL controls -- Wear lined, cast steel sidewalls -- 29 mm cutting system with 2 tooth main cutters -- Mechanical seals -- 60 mm screen with Hardox baskets -- Shimmed screen for position control -- Automatic central lubrication -- Quick change screen -- Brand new with warranty -- Loaded on your truck

UNTHA RS 40 QUAD SHAFT SHREDDERSpecifications: -- 60hp -- 40" x 30" Opening -- Auto Reverse push button controls -- Base support structure -- Feed Hopper -- Unique 4-shaft design & integrated screen process. -- Most materials in one pass, where other machines require multiple stages of processing -- Approx 1700 hours

Up-Right XL24 Man Lift Battery Operated over Hydraulics

US CONCEPTS FAS-COBRA Handrail Router with 90° tilt and auto feed. Can handle the squaring and dimensioning of the laminated glue-ups, as well as profile shaping of the spiral, curved and straight handrails. Designed to use corrugated back profile knives in a 100 mm dia. head. -- Capacity/Drive: 5" Max. handrail height, 4" max. handrail width, 6-1/2" max. cutter diameter; powered by 7.5 HP spindle motor at 6,200 RPM; spindle has 1-1/4" diameter. -- Standard equipment includes: Automatic starter with motor overload protection; variable feed speed controller; (2) 0.5 HP SUMITOMO Cycloidal gearmotors; 0 - 30 FPM variable speed feed. 2-axis adjustment; cast iron dovetail slides; spindle tilts to 90°; cutterhead guard and UL/CSA electrics. -- Handrails are machined laying on their side. The horizontal cutterhead with profile knives shapes the inside edge first from the top and the outside edge from underneath. -- Vertical spindle position can be used for squaring of the glued edge (bottom of the handrail) with straight knife or squaring and grooving with profile knives. -- Options available: Dynamic braking, Electronic scale for up/down adjustments. Electronic scale for in/out adjustment, Motorized up/down adjustment, Export crating, Please call for current prices.

US CONCEPTS CHB-16 HauncherThe CHB-16 Hauncher-Notcher is designed to notch along the edge of the board or across the end.Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. Equipped with: a 40 mm horizontal spindle that moves up hydraulically past the table with the clamped material. -- A backup board in the table and climb cut ensure the clean-cut, even on cross grain. -- Material air clamps and spindle motion are actuated by a foot switch. Specifications: -- Spindle Dia. 40 mm, Spindle Length 16". (Also available in 20" capacity) supported on both ends; -- Max. Cutter Dia. 10" (254 mm); max. Cutting Depth 2-1/2" (64 mm); max. Material Stacking Height 8" (200 mm). -- Spindle Speed 4,300 or 6,200 RPM; Feed Speed (Air/Oil) 0 - 25 FPM; 15 HP motor; Dust Outlet 2 x 6" (150 mm).Complete with: -- (2) Air Clamps, Back Fence, Side Pivot stop, and Stop Bar. -- Table Size 42" x 16"; Machine Weight 1,650 Lbs (750 kG). -- OPTIONS: Electric; 20 or 25 HP motor; Additional Air Clamps; Additional Side Stop; Center Fence mounted to the Table; Horizontal Clamps; Extended Stop Bar. -- Other Options: Fixture for 45° Cut (Mitered cabinet Doors or Stretcher Bars).

US CONCEPTS FAS-106, 6" Shaper MoulderSpecifications: -- 31" X 49" Table size -- 10 HP main motor -- 1-1/4" spindle, 6,500 RPM spindle speed -- 6" max. cutting weight, 3-3/4" max. part thickness, 6-1/2" max. cutter dia. -- 3/4 HP variable speed DC feed motorEquipped with & Features -- (5) horizontal feed rolls -- Cast iron table -- Digital cutting height adjustment.

US CONCEPTS CHB 12 HauncherThe CHB-12 Hauncher-Notcher is designed to notch along the edge of the board or across the end.Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. Equipped with: a 40 mm horizontal spindle that moves up hydraulically past the table with the clamped material. -- A backup board in the table and climb cut ensure the clean-cut, even on cross grain. -- Material air clamps and spindle motion are actuated by a foot switch. Specifications: -- Spindle Dia. 40 mm, Spindle Length 12". (Also available in 16" & 20" capacities) supported on both ends; -- Max. Cutter Dia. 10" (254 mm); max. Cutting Depth 2-1/2" (64 mm); max. Material Stacking Height 8" (200 mm). -- Spindle Speed 4,300 or 6,200 RPM; Feed Speed (Air/Oil) 0 - 25 FPM; 15 HP motor; Dust Outlet 2 x 6" (150 mm).Complete with: -- (2) Air Clamps, Back Fence, Side Pivot stop, and Stop Bar. -- Table Size 36" x 16"; Machine Weight 1,650 Lbs (750 kG). -- OPTIONS: Electric; 20 or 25 HP motor; Additional Air Clamps; Additional Side Stop; Center Fence mounted to the Table; Horizontal Clamps; Extended Stop Bar. -- Other Options: Fixture for 45° Cut (Mitered cabinet Doors or Stretcher Bars).