Mellott For Sale

84" maximum opening; 9" minimum opening on 90° trim; (2) 3 HP trim saw motors; 16" dia. saw blade capacity; 1" diameter saw arbor; (2) 3 HP boring units (boring heads not included); saws and boring units tilt 10° up, 23° down and swivel 90° for simple or complex miter work; .5 HP motorized open and close; (2) pneumatic holddown clamps; saw and boring units upgraded to hydraulic control; 5 HP hydraulic pump; retrofitted with electric brake system

1993 Bell Ultra T Track Feller Buncher, Engine Deutz 80 HP Diesel Engine, Hour meter showing 95 Hours,28" Dangle Head Saw, 3/4 " Bar and Chain, Enclosed Cab with heat Joystick Controls, Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Bell Industries Circle Saw Grinders (2) Available

2019 Bells 8000 Firewood Processor, Circular Saw, Engine has ONLY 1,100 Hours, Enclosed Cab with Heat No Air Conditioning, Wedges Include a 6,8,10,16, Has Conveyor from the rear to a Tumbler Screener, 7 Cords Per Hour, Has a 50' additional conveyor for $25,000.00 Ready for Firewood. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Bell 6000 Firewood Processor -2048 hours -4.4 liter cat engine -Enclosed cab with heat but no A/C -8. 12. and 16 way wedge -8' live deck with 5.5' spacing -Runs and operates as it should

2017 Bells Machining 8000 Firewood Processor -4895 hours -New box of teeth and saw tooth removal tool to go with machine!!! -Fully serviced and inspected by local CAT dealer -Has 32 ft conveyor that goes with it -Conveyor info: -New rims and tires -Had a wheel bearing seize on conveyor. They had it replaced, and rest of the conveyor was inspected. -All new metal on saw guard from Easton Made. Ready to go to work!!!!!!

2015 Bell 6000 Firewood Processor, Includes a 32' Conveyor, ONLY 1,400 Hours, 60 Ton Wedge, Enclosed Cab with Heat, No AC in Unit, Caterpillar 100 HP Turbo Diesel Engine, Ready to Work Will take 40' Logs, 6 Way and 8 Way Wedges. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Beloit ring type debarker, electric drive, working condition

BENCHMARK 205-HP3 Hot Melt Adhesive ApplicatorHot Melt Adhesive Applicator with: -- Bodine adjustable speed motor. -- Bead dispensing applicator. -- Also includes an extra Bodine adjustable speed motor regulator, for fine tuned glue application.

Benshaw 150Hp Soft Start

Benshaw 75HP Soft Start Mdl CBRDB6-124-12

Benshaw 200 hp. soft start

Benshaw 150HP Soft Start

2002 Benson Chip Trailer Open top 45'

20HP HYDRAULIC UNIT

(3) 60HP Motors (1) 75HP Motor with Large Hydraulic Holding Tank

Bertheson Press Platform size 51 Wide X 102 Long with 2 16 ft shuttle driven aluminum runner platforms. Pressure 2500 psi and we ran a temperature of 350 degrees for Tego and 165 degrees for plywood. The Press can laminate Tego Film glue or pva c glue. This press is a double shuttle and can laminate up to 14 ft by double pressing on shuttle. We can get the press operational if you are interested. We only have to hook up the power. Very good condition!

YM-800 1 YARD 4 OR 5 TINE Orange Peel GrappleSpecifications: -- Operating Weight 2,400lbs -- Opening Width 71 1/8" -- 4 or 5 Tine in stock - Ready to ship -- Rotating -- Hanger for Extra Cost

BIESSE AKRON 1440 SINGLE SIDE EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) + with "AIR FORCE" PUR & EVA TECHNOLOGY: -- Specifications: Latest Technology combines productivity, efficiency, and flexibility for all types of edgebanding material."AirForce" emits high temperature compressed air through a slot nozzle directly onto the reactive layer of laser banding. That layer is activated and bonds the banding to the panel fibers. This technology allows changes based on banding colors without any setup.Environmentally friendly providing a “clean - green"; technology that eliminates glue and fumes, which becomes timely & important. In addition, it features a conventional EVA (Hot Melt) Gluing System to cover the full range of edgebanding processes in use today!Working Capacity: -- Min. panel height: 10 mm; Max. panel height: 60 mm; Height of edgebanding material: 14 - 64 mm; Thickness of edgebanding material in rolls: 0.4 - 3 mm; Thickness of edgebanding in strips: 0.4 - 10 mm.Min. panel protrusion from the track: 25 mm; Panel length: 140 - 3200 mm; Min. panel width (with length 140 mm): 85 mm; Min. panel width (with length 250 mm): 50 mm.Multi-Feed speed 8-12-15 &18 MPM.Glue & Pressure Section: -- Infrared lamp IRL 700; Gluing unit Quickmelt QM 703 EVA melting glue. Special glue container for PU glue; Additional glue container for EVA gluing unit with melting device.Additionally equipped with the AirForce "VC-710", High pressure, hot air system to reactivate special pre-coated edge material (commonly referred to as laser edge.Automatic edge feed; Cutter knife; Pressure zone with 1-Drive & 2 pressure rollers.Working Units: -- Pre-milling unit with 2 x 0,8 kW, 12000 RPM motors, front/rear inclination 0° -15°. -- RT 02; Gluing, edge feeding, and pressing unit VC-511. -- End trimming unit with 2 x 0,8 kW, 12000 RPM, front/rear, inclination 0° -15°. -- Fine trimming unit 2 × 0,6 kW, 12000 RPM top/bottom. -- (2) Multifunction Corner Rounding unit, 0,65 kW each, for Corner Rounding, Straight Work pieces, Post and Soft-Forming 90° -180° degrees. -- Edge scraper unit; -- Glue scraper unit; -- Buffing unit 2 × 0,37 kW motors. Machine Features: -- Belt pressure beam. The top presser comprises a rubber belt with a stain-proof coating. The thrust exercised on the panel is provided by springs housed on techno polymer connecting rods. -- Auto adjustment of in feed fence. -- Automatic track lubrication system with dynamic track absorption. -- Manual infeed system for narrow pieces. -- One coil automatic edge feeding. -- Hybrid gluing head for granulated EVA and Polyurethane glue. -- Pre-Melter TM10 for Polyurethane glue in cartridges. On-demand top-loading pre-melter for PUR glues. -- Adaptive infra-red lamp to heat up the panel side before the glue application, in order to optimize the adhesion process. -- Independent pneumatic exclusion of the top/bottom fine trimming unit. Operator & Machine Control: -- Biesse, Windows-based "

BIESSE/ARTECH - SEKTOR 470 (SELCO SK4): Front Load, Automatic Panel Saw -- SpecificationsWorking capacity: 149.6" (3,800 mm) Max. rip cut cap. & 149.6" (3,800 mm) max. pusher stroke; 3.54" (90 mm) max. saw blade projection; 15 HP (11 kW) main & 3.6 HP (2.6 kW) scoring motor. -- Saw CarriageFeed speed from: 3 - 394 FPM (1 - 120 MPM); return speed: 394 FPM (120 MPM); automatic cutting length limiter adjusts the cutting length at the end of the workpiece; automatic saw carriage lubrication. -- Pusher Fence 196 FPM (60 MPM) Forward positioning speed; 196 FPM (60 MPM) return speed; rack & pinion movement on both sides to assure the pusher remains parallel. (7) Material gripper clamps open to 3.34" (85 mm). -- Operator InterfacePC Front-End controller: 19" Monitor display with real-time graphics: Virtually unlimited program storage via disk drives; function control keypad; USB & RS-232 serial port; keyboard, mouse & CD ROM drive.Diagnostic for errors or machine malfunction by means of an error signal code; incremental or absolute programming in mm or inches."Quick Opti" Software for optimization of cutting patterns directly on machine; all enclosed in an air-conditioned control cabinet. -- Complete with:Automatic side aligner device: 0 to 114" Stroke; automatic saw blade height adjustment; "PROLOCK" quick-change blade system; (3) air support tables: 78" x 24" (1,981 x 609 mm). -- Actual Model: BIESSE/ARTECH - SEKTOR 450 (SELCO SK4)