Mellott For Sale

Fulghum 10x90 Drum Debarker Includes Infeed

air exchange horizontal tank mount air compressor, (2) 15 HP dual compressor, Ref #204, Call 931-797-6284 New coupling and electrical switch repair ready to work. Dual Air compressor (2) 15 HP pumps

Furnas MCC Panel 800 Amp (14) Starters and Breakers

G & P - EPN, ... Pump Sander (Double-Sided), -- Double-end direct-drive pneumatic Drum Sander. -- 2 HP Motor - 3,600 RPM motor speed. -- (2) 1-1/4" Dia. x 10" long shafts.

G-Tek Band Resaw with 12"x12" Capacity, 40hp Motor s/n: 84.124.0804.27.C.0.B.0.0.1.1.36 model: Runaround

G-Tek Band Resaw with 12"x12" Capacity, 40hp Motor s/n: 84.124.0804.27.C.0.B.0.0.1.1.36 model: Runaround

G Tek Single Head Grade Band Resaw With Complete Run Around System, Cab and Set works, 5 Way Seperator. Just about the Same as a Brewco B-1600. Additional Pictures available on Request

G Tek Grade Runaround Band Resaw with Complete Runaround System

New Galvanized or painted 47’ 3 Axle 5 Bunk Log Trailer All Alum. Wheels, Front and Rear Axles Lift, 30k Axles and Suspension, LED Lights - Lighter and Stronger!

Complete 5 Bunk Kit with easily removable Aluminum Stakes and End Gates for Flatbed or Rail Trailers Kit includes: 10 Galvanized Bunk Bottoms, (20) Alum. 8’ Stakes, Alum, Front and Rear Gates, Mounting Kit, $7,750 Galvanized Bunk Bottom w/(2) 8’ Aluminum Stakes and Hardware $620 Alum. Stake 8’6..........$145

LOG BUNKS - GALVANIZED STEEL BOTTOM WITH ALUMINUM STAKES - EASY TO INSTALL - Lighter and Stronger!

Complete Truck Rack Bunk System Kit 4 Galv Bottoms w/Up To 9’ Alum Stakes, Winches, Alum Front Rack Up To 9’ Tall, Galv Low Grapple Carrier, 2 8’ Alum Grapple Guards for in Between Bunks. Includes Mounting Lighter and Stronger!

CUSTOM LOG BUNKS FOR TRUCKS AND TRAILERS - GALVANIZED STEEL BOTTOM WITH TWO ALUMINUM STAKES - Lighter and Stronger!

New Crib & Rail Pup Trailers Lightweight, high strength 130ksi beams. Rail or Crib style available

Gannomat Pro-Line 50 • Row of holes as well as line drilling in the SYSTEM 32 mm • 50 (2 x 25) holes in one drilling cycle

Boring/Inserting aggregate travel on profile bearing guides with: 3 spindle boring unit – Horizontal 1 Spindle Routing unit – Horizontal 1 Blowing, gluing, dowel inserting unit for a single selected dowel 6 – 12mm diameter, 25 – 60 mm length – Horizontal Barcode reader Fully automatic electronically controlled central lubrication Closed gluing system with variable setting of glue amount by touch screen Selector switch GLUE/WATER for quick rinsing of entire system 1½ gallon glue Stainless steel container 1½ gallon water Stainless steel container Glue control warning light 1 Right-hand stop, 1 left-hand stop, and 1 center stop, all removable (3) Starting buttons for individual processing of 1-4 work pieces (8) Pneumatic clamping cylinders for work piece thickness max 80mm, work piece length minimum 70mm 1 Exhaust ducting, with connection diameter 80mm Programming by menu-based software; Beckhoff 15? Touchscreen display Operating system: WINDOWS 7

GANNOMAT INDEX 280 TREND CNC BORE, GLUE & DOWEL INSERTER: -- Specifications:CNC Controlled horizontal Point-to-Point Drilling, Gluing & Dowel Inserting Work Center for absolute, incremental, variable (parametric) programming of boring patterns. -- Working Field(4) Independent zones for individual processing of (1 - 4) pieces. Pneumatically activated Stop system (side fences) consisting of: Right-hand, left-hand, and center stop. Max. single part Length 2,800 mm (110"). As a 2-zone: LH & RH is 1,400 mm (55") each part. As a 4-zone with center fence: LH/RH is 700 mm (27.5") each part.Min/Max. Material Thickness 0.50" - 3.125" "X" Axis Positioning Speed 246 FPM (75 MPM) and driven by rack & pinion for fast acceleration/deceleration of working unit. "Y" Axis is set by mechanical digital counters. "Z" Axis is NC controlled height adjustment for boring/inserting units. -- Hold-down Clamps:Total of (10) pneumatic, "quick change" Hold-down Clamps. -- Dowel driving & horizontal boring:Integrated into (1) station; the Dowel Driving Unit is located alongside the Boring Station; both units are mounted on (1) support. -- Horizontal Drilling Spindle:Can be setup for 6 - 8 or 10 mm; dowel length from 25 - 50 mm. -- Doweling Station includes:Vibrating hopper with: (1) Single drop device and (1) outlet tube; insertion head & dowel driving with air impulse.Mechanical dowel diameter & dowel length control prevents the insertion of any oversized dowels. -- Glue Valve/Amount:Controlled via software and can be adjusted by milliseconds; (2) standard separate stainless steel 1.5 gal. pressurized tanks (one for glue, one for water to clean/purge the glue tubes. -- Operator Interface:GANNOMAT + BECKHOFF "C3640 Twincat" PLC Operating System.15" Touch-Screen color monitor; network card (for online operation); serial, parallel, USB ports. -- Actual model is: GANNOMAT INDEX 280 TREND. NOTE: Machine is currently setup for 8 mm dia. x 35 mm long dowels.

GANNOMAT - INDEX 470 TB: CNC Bore, Glue & Dowel InserterSpecifications -- GANNOMAT "Index 470 TB": CNC Controlled Point-to-Point Drilling/Gluing/Dowel Insertion Machine for variable programming of boring patterns. -- X-Axis CNC Controlled via: Precision ball screw Servo drive; Y- & Z-Axis adjusted via mechanical spindles; set by manual digital indicators.Working Width -- 1,300 mm (51") x 3/4" to 7-3/4" Width x 1/2" - 3-1/8" material thickness with: (2) Fields; LH/RH (mirror image). -- (8) Vertical holddown cylinders: Horizontal part processing. -- Dowel driving & horizontal boring integrated into: 1-Station; dowel driving unit is located alongside the Boring Station; both units are mounted on (1) support. -- Horizontal Drilling & Boring Station head setup for: 6 - 8 or 10 mm; dowel length: From 25 - 50 mm.Dowel Station -- Vibrating hopper; insertion head & dowel driving with: Air impulse; setup for: 8 mm dia. x 50 mm long dowels. -- Glue valves controlled individually at Control Cabinet; central adjustment for the amount of glue by means of digital timer.Operating System -- MS-XP & GANNOMAT Production software; 15" color touchscreen monitor interface; USB drive; bar code capable; Controller & Drive:BECKHOFF - "C3620: TwinCAT V2.10".Complete with: -- (1) Glue tank; (1) water tank; auto lubrication system.

GANNOMAT - CONCEPT 70/170 EASY: Case Clamp (Semiautomatic)Specifications: Solid platen Case Clamp specially designed to save space; time & labor in all production situations.Whether your only Clamp or a 2nd Clamp, "Easy 70" is a faster cabinet assembly production Clamp.Features -- Minimal floor space required; length: 79"; width: 32"; height: 82.6". -- Pressing force exerted along the horizontal axis of the dowel joint by the side pressure beam. -- Continuous working surfaces: Fixed sidewall & side pressure beam; eliminates setup time for carcasses with: Fixed shelves, stretcher rails, etc., and small carcasses like drawer boxes.Working Capacity -- Min. clamping width: 6";; max. clamping width: 51.2";; max. clamping height: 66.9". Equipped with: -- Adjustable Clamping cycle time w/auto. opening. -- Simple operation by directional push buttons. -- Potentiometer for stepless adjustable pressing force. -- (3) Pressing velocities & adjustment rates: 5, 10, & 25 MPS (with fine positioning or creep feed). Actual Model: GANNOMAT - CONCEPT 70/170 EASY

GANNOMAT INDEX 230 TREND CNC BORE, GLUE & DOWEL INSERTER: -- SpecificationsCNC Controlled horizontal Point-to-Point Drilling, Gluing & Dowel Inserting Work Center for absolute, incremental, variable (parametric) programming of boring patterns. -- Working FieldStop system (side fences) consisting of: Right hand, left hand, and center stop (all removable).(4) Independent zones for individual processing of (1 to 4) pieces. -- "X" Axis:Positioning speed: 246 FPM (75 MPM); CNC controlled and driven by rack & pinion for fast acceleration/deceleration of working unit. -- "Y" Axis:Set by mechanical digital counters. -- "Z" Axis:CNC Centering height adjustment of boring/inserting from the control. -- Working Length:2,300 mm (90-1/2") x 1/2" - 3-1/8" Material thickness; use as 2-field, LH & RH @ 1,150 mm (45-1/4") wide or 4-field with center fence, LH/RH - LH/RH @ field 570 mm (22.4") wide to increase throughput on smaller parts like drawers, stretchers, etc. -- Hold-down Cylinders:Total of (8) pneumatic, "quick change". -- Dowel Driving & Horizontal Boring:Integrated into (1) station; the dowel driving unit is located alongside the boring station; both units are mounted on (1) support. -- Horizontal Drilling Spindle:Can be setup for 6 - 8 or 10 mm, dowel length from 25 - 50 mm. -- Doweling Station includes Vibrating Hopper with: (1) Single-drop device and (1) outlet tube; insertion head & dowel driving with air impulse; mechanical dowel diameter & dowel length control prevents the insertion of any oversized dowels; setup for 8 mm dia. x 35 mm long dowels. -- Glue Valve/Amount:Controlled via software and can be adjusted by milliseconds; (2) standard separate stainless steel 1-1/2-gallons pressurized tanks (one for glue, one for water for occasional rinsing cycle). -- Operator & Machine Control: Windows "XP Pro" Operating System interphase and BECKHOFF "C3640 Twincat" PLC; easy to program GANNOMAT production software.Equipped with 15" Color monitor, CD-ROM drive, network card (for online operation); serial, parallel & USB interphase & soft-foil covered keyboard. -- Options include:A new backup PLC that is unused. -- Actual model is: GANNOMAT INDEX 230 TREND.