Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 8 of 502
10035 Results Found
Sort By 
Call for Price

Left Hand Double End Trim Saw

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

(4) 200 HP High RPM Motors Your Choice or take all Four. Look at Tags

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Several C-Faced Motor & Gear Reduction Box Drives

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

ACCE TIRE BALERSpecifications: -- 30 HP motor --Overall Dimensions - 18' X 16.5' X 12.5' --13,000 lbs --Dual Cylinder

EX-FACTORY INC.
704-841-2001
Call

Call for Price

15" color "Touch Screen" with Industrial Computer for setup and running CNC control of machine setup in less than one minute All components sized to handle 6x30 dowels Three v-groove heads with minimum 4" center to center Three banks of nine spindles for drawer front drilling One additional nine spindle bank to handle four sided drawers Two nine spindle horizontal banks for dowel drilling Runs up to 22 parts/minute in production Application Ability to v-groove drawer parts from 25" to 96" in length Ability to run parts as short as 10" without v-groove Ability to handle parts from 2-1/2" to 13-3/4" in width Ability to handle material thicknesses of 7/16" & 1/2" Makes box drawers with dowel construction Makes box drawers with 3 miters & 1 butt joint CNC Setup of machine Hopper loading of parts Parts feed through to the rear of the machine Like New Machine has run less than 100 parts. NEW PRICE: $235,000

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

15" color "Touch Screen" with Industrial Computer for setup and running CNC control of machine setup in less than one minute All components sized to handle 6x30 dowels Three v-groove heads with minimum 4" center to center Three banks of nine spindles for drawer front drilling One additional nine spindle bank to handle four sided drawers Two nine spindle horizontal banks for dowel drilling Runs up to 22 parts/minute in production Application Ability to v-groove drawer parts from 25" to 96" in length Ability to run parts as short as 10" without v-groove Ability to handle parts from 2-1/2" to 13-3/4" in width Ability to handle material thicknesses of 7/16" & 1/2" Makes box drawers with dowel construction Makes box drawers with 3 miters & 1 butt joint CNC Setup of machine Hopper loading of parts Parts feed through to the rear of the machine Like New Machine has run less than 100 parts. NEW PRICE: $235,000

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 12,000

ACCU-SYSTEMS H49 CNC BORE, GLUE & DOWEL INSERTER: -- Specifications: (2) Working zones and an overall 49" max. width capacity. --(1) CNC Controlled head assembly with rapid (side-to-side) traverse, assembly with boring, gluing & insertion unit, 1 HP - 18,000 RPM drill motor. -- (4) Vertical pneumatic hold-down clamps, function selector control for boring only or doweling, adjustable drilling speed. -- 1-9/16" (40 mm) Max. dowel length, setup for 8 mm dowel dia.; height adjustment up to 1-1/8" material thickness with digital readout. -- Operator Interface: CNC "Color Touch-Screen" Controller for function & part programming and program storage. -- Complete with:(1) 12" Dia. vibratory feed hopper. Totally sealed electronically metered glue system with 1-button flushing. -- 100 PSI high power glue pump, 2-1/2-gal. glue tank. Anti-slip table surface. 49" "X" axis cap. -- Rack & pinion drive, and centralized dust collection manifold.

EX-FACTORY INC.
704-841-2001
Call

Call for Price

Accu-Systems MMTJ Door Machine

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 32,500

The Accu-Cut Edger is an efficient and reliable machine designed specifically for sawmill operations, focusing on optimizing board edging tasks. This equipment is brand new and features minimal operating hours, ensuring a long service life and dependable performance for industrial applications. Produced by AccuCut, a well-regarded manufacturer in the field, this edger is constructed to meet the demands of modern sawmills with precision and efficiency. Although the model number is unspecified, this machine represents the latest innovations in board edging. Its design focuses on maximizing productivity while maintaining precision, providing a seamless operation that easily integrates into your production line. With minimal hours clocked, the Accu-Cut Edger is essentially new, making it an ideal choice for businesses looking to expand or update their sawmill equipment. Crafted with high-quality materials, the Accu-Cut Edger promises durability and excellent performance. It's an excellent investment for businesses aiming to enhance their operational capabilities and improve the efficiency of their board processing tasks.

Showcase Equipment
260-250-4645
Call

$ 162,000

This is for a pair of fully enclosed and drive through Semi Downdraft paint booths with On The Roof of the booth heated air make-up that are connected by a cross passage room/ paint room. There are actually (2) two booths that are assembled end to end making the overall length of Each tunnel 55' 9" long (see layout drawings) Also a Paint mixing room with presurization and heat is included connecting the two long booths. There is also a presurized and heated paint mixxing room (see specifications below) that comes with this equipment. See layout drawings in this listing attachments,The equipment has low usage and is currently set up. price does not include tear down but that can be quoted. Booth Description:Dual Skin Space Saver - 28’ l x 14’4"; w x 13’1"; h External DimensionsDrive ThruSide Service Door with Observation Window IncludedHorizontal Intake - DF 1.2 Mil BTU / 14,000 CFM / 10 HP / ADH 500 / UPGRADEExhaust Bridge - 30"; Tube Axial Fan / 5 H.P. Motor / 12,500 CFMSmart Pad Control Panel - (1) 10 HP / (1) 5 HP / Burner Voltage OutputSmart Pad Control PanelVFD for a 5 HP Single Motor 480 V Three PhaseVFD for a 10 HP Single Motor 480 V Three Phase480 / 277 V Three Phase with 120 V Single Phase Burner Circuit(10) Upper Gable and (4) Lower Vertical Lights - 4’28"; Duct Work Package - 15’ (Intake & Exhaust)LED Upgrade per FixturePass Between Room:AccuMix Dual Skin Mixing Room 8’ w x 16’ d - Attached Two Sided12"; Duct Work Package - 15’ (1 Exhaust)LED Upgrade per FixturePaint Mixing Room:AccuMix PRO Mixing Room 8’ w x 10’ d GalvanizedWhite on White Option for a Mixing RoomPRO Prep - 24’ l x 24’ w x 12’ h Above Ground Solid Back with (1) ExhaustPRO Stand Alone Unit - 1.2 Mil Btu Burner / 10 HP Motor / 14,000 CFMRear Wall Exhaust - 30"; Tube Axial Fan / 5 H.P. Motor / 14,000 CFM UpgradeSmart Pad Control PanelVFD for a 5 HP Single Motor 480 V Three PhaseVFD for a 7.5 HP Single Motor 480 V Three Phase480 / 277 V Three Phase with 120 V Single Phase Burner Circuit(4) Ceiling Mounted Lights Inside Access - 4’ Four Bulb28"; Duct Work Package - 15’ (Intake & Exhaust)Curtains - 12’ l x 9’ h SolidCurtains - 24’ l x 9’ h Solid9x24 wallLED Upgrade per FixtureLED Upgrade per Fixture12"; Duct Work Package - 15’ (1 Exhaust)

EX-FACTORY INC.
704-841-2001
Call

$ 4,200

NEW Accuracut Band Saw Guide Dresser - Safer and More Accurate! 4" to 14" - 110 Bosch, $3,900. 20V Dewalt, $4,250. 20V Milwaukee, $4,800 - no batteries or chargers included - Call Jeff for more info at 574-370-5050

 White Pigeon, MI
Jeff Miller Inc.
574-370-5050
Call

$ 11,500

Remote Gas Honda Power—No Electric Needed. Coupler, Counterbore, and drill not included@ this price additional $1,450.00 for a ready to drill machine - Call Jeff for more info at 574-370-5050

 White Pigeon, MI
Jeff Miller Inc.
574-370-5050
Call

$ 2,500

USED CTR DELIMBERS, STARTING AT $2,500.00 CALL GAVIN 601-410-3416 OR TIM AT 251-366-3237

 State Line, MS
AlaMiss, Inc.
601-848-7811
Call

$ 10,500

L model crosshead damper new in crate

 State Line, MS
AlaMiss, Inc.
601-848-7811
Call

$ 7,500

437D MAIN HYDRAULIC PUMP SN# 254106- HAS A 1400.00 CORE NEW IN CRATE Hydraulic pumps without circular saw / no splitter

 State Line, MS
AlaMiss, Inc.
601-848-7811
Call

Call for Price

Acme Carbide Saw Grinder

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

75 KVA 480 volt to 240 volt

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Acrowood Mdl CHIPR 6K Chipper S/N CHPR001

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Good Used Acrowood 8424-6K Slant disc chipper w/ drive

 Talladega, AL
Woodland Parts & Service Inc
256-362-5097
Call

Call for Price

10' x 12' Chip Screen 1 5/8" x 1 5/8" Top Screen And 1/4" Bottom Screen

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved