Equipment For Sale

Baker 12" resaw w/ cross over chains and return. Machine has four sets, all manual, line shaft ready. Located in PA. #C916

Baker Stack Rack. #00870

Baker single head resaw, Model; BBR-O, Serial#; 04-3371, has tilting infeed belt w/ digital display, electric drive, includes spare parts/ blades, excellent condition

2 - Baker Stacking Racks available

New Fuses | New Main Breaker | Hydraulic Drive | Comes with 50 Blades

2 strand transfer deck, 28" wide x 14' long, #80 roller chain, no drive, good condition

Baker Mill Like NEW

Baker board deduster, up to 8" wide capacity, electric drive, price includes all new brushes, feed belt and gone through completely, very good condition

Baker 16" Blue Streak Grade Resaw w/Cab & Setworks

Baker 2-Head Resaw 20 HP Motors Return Conveyor

2016 Baker 3665D Bandsaw Mill Two owner 65HP diesel Loaded 3500 hours New tracks, chains, wheels, sprockets, many hoses and bearings, lots of welding and straightening, new blade guides Spare wheels and parts included

3650 Baker Super Streak Mills

2015 Baker Dominator Band Sawmill, Model 3650E with Baker (3) Strand Infeed Deck. Excellent condition, hooked up to power and ready to be demonstrated. Low use.... Good Track Infeed deck has new cylinder Hydraulic over electric general factory networks. ref# 119 Call Jackie 931-698-3342. Make us an offer Seller is negotiable on this machine that is over $100,000 new

1993 Baker 4 Head Resaw Approx. 50 blades Size: 13' 2" x 1" x .035" x 1/2" Tooth Carbon Resaw Blade Saw 1 needs a new spindle. Hydraulic drive. New Main Breaker New Fuses A couple of Starters have been replaced. Approximately 6,240 Hours Baker 4 Head Resaw Specifications Guide System: Baker Low-Profile Flat Guide System with steel guide plates for enhanced precision. Saw Dust Outlet: Dimensions: 6"x6" (15.24 cm x 15.24 cm) square. Outlet Adapter: 90° adapter chute to a 4” (10.2 cm) diameter outlet. Rotation: Can be rotated for discharge in four directions. Recommended Airflow: 600 CFM (17 m³/min). Motors: Main Motors: 20 HP, 3-phase motor on each head. Inline Hydraulic Pump Motor: Cutting Capacity: 6" x 12" (15.24 cm x 30.48 cm). Feed System (3-Sided Feed Works): Rough-top belting for traction. Powered side feed rollers for smooth material handling. Non-powered hold-over wheels. Feed Speed: Fully variable, adjustable from 20 to 120 feet per minute (6 to 36 meters per minute). Delivery is available at the buyer’s expense

Baker Products’ Self-Dumping Steel Hoppers can be used to collect almost anything. It has a reinforced base and continuous weld. When the hopper is full, you can easily pick it up with almost any forklift and dump it simply by pulling a lever. It has a lock, so the load will not dump by mistake. The Baker Self-Dumping Steel Hopper is a convenience every company should have. A. 2 yd (1,828 mm) 603 lbs. (274 kg) B. 2 yds (1,828 mm) 805 lbs. (365 kg) C. 3 yds (2,743 mm) 971 lbs. (440 kg) A. 44” (111.8 cm) 59” (150 cm) 69½” (176.5 cm) B. 45½” (115.6 cm) 57½” (146 cm) 64½” (163.8 cm) C. 55” (139.7 cm) 58” (147.3 cm) 71” (180.3 cm) Forklift Opening: 2½” (6.4 cm) high by 48½” (123.2 cm) wide

Brand new...never used...still on the original pallet.

Baker Pallet Notcher 2020 or 2021 Single head 3 stringer Has hyd but was line shaft driven when used Used very little

Baker Single Head Band Resaw With Return

Baker Model D Resaw 16" Wide capacity Heavy Duty Return Conveyor

1992 Baker 6 Head Resaw Six-Head "C" Saw 1 needs a spindle and wheel replacement. Approximately 8,320 Hours Serial Number 92-379 6 Motors (30) HP (37) Amps Mechanical Drive