Mellott For Sale

BLUE GIANT SFSRH33/575 Scissor LiftHydraulic 3,000 Lbs. scissors lift -- 34" x 108" platform with idle roller -- Low 9" x high 53",Hydraulic pumping unit with 3 HP motor.

BLUM - Mini Press: Hinge Borer -- Tabletop "Mini Drill" unit for BLUM Hinge Boring; 1.5 HP (1.1 kW) - 2,450 RPM drill head assembly for hinge cup boring. -- Head assembly rotates for several hinge & drawer system boring patterns; pneumatic drill cycle with air blow-off. -- Includes: 48" x 24" Tabletop. -- Machine also used for line boring by purchasing an auxiliary BLUM spindle head; not included. Complete with: 3-Drawer mobile storage base for all hinge components.

MLS Number 12171481 BM&M 12X20 Chip Screen Rebuilt with new bottom pan Rebuilt motor and new belts Main bearing tested good Screen size buyer option A new bearing can be installed at an additional price.

MLS Number 13495390 BM&M 8 x 10 2 Deck Chip Screen Owner purchased the screen but never installed in the mill. Screen is still wrapped in shipping plastic.

2 available

BMT B 700 Pin Router referbished in 2010

BOARKE (HOLZ-HER) - BKM-37RK2: 2-Head Wide Belt Sander37" Width cap. Drum & Combination Head.Head Configuration1st Head. Rubber-covered contact roll; 6-1/4" dia.; 20 HP motor.2nd Head. Combination head with: 6-1/4" Dia. rubber covered contact roll (50-Shore); 3-1/8" wide finishing platen; 15 HP motor.Specification -- Abrasive belt size: 37" x 75". -- Air tensioning & electronic abrasive belt tracking. -- Conveyor belt feed with: 2 HP Variable feed drive. -- 9 - 45 FPM Feed speed with inverter.Equipped with & Features: -- Infeed & outfeed rubber covered holddown rollers. -- 1/8" - 7" Max. motorized thickness opening. -- LED Readout thickness. -- Part "over-thickness" protection. -- Automatic conveyor belt tracking. -- Emergency stop button. -- Motor load meters. -- Magnetic controls.NOTE: Very clean machine; low hours: Only ran prototypes; replaced with 3-head machine for production.

BOARKE - BKM-43103RRK: (3) Head 42″ Wide Belt Sander (3 NEW Drums)43" Width cap.: Drum, drum, platen.Head Configuration1st Head: 30 HP; 10″ Helical grooved drum.2nd Head: 25 HP; 10″ Helical grooved drum.3rd Head: 20 HP; Helical grooved (idler) with a platen. Specifications -- 42″ Width capacity; 5″ height capacity running. -- 43″ X 103″ Abrasives. -- 1st Head: 30 HP; 10″ helical grooved drum. -- 2nd Head: 25 HP; 10″ helical grooved drum. -- 3rd Head: 20 HP Helical grooved (idler) with a platen. -- 1st & 2nd Heads: Dial indicators to dial in abrasives; has optional 5 HP vacuum feed bed.Equipped with & Features: -- Feed: Variable from 7 - 45 FPM via a 2 HP motor; VFD for speed control. -- Feed Mat: Thick; with usual crazing, but plenty of life. -- Elevation: Handled by a 1/2 HP motor. -- Machine includes: Digital readout; touchpad control combined with auto thickness calibration unit on the right.

Boarke 43" 2-Head Sander

Manufacturer’s Specification ( to be confirmed) - With its powerful 3 HP motor can delivers the performance professional demand. - Coupled with an industrial quality eccentric oscillation mechanism that delivers more efficient sanding, less tendency to burn and less belt loading. - Heavy duty spring system allows easy adjustment for the front aluminum table for full use of the abrasive surface. - Aluminum auxiliary contour table allow use of 4” idler roller as a drum sander. - 9” Dia. Drive drum, 4” Dia. Idler drum. - 9-1/2” x 48” cast iron platen with graphite pad. - Rugged bearing – assisted belt torsion devise.. - Aluminum table travels 8” and tilts – 5 to 45 degree. - Dual 4” dust ports. Belt speed: 4200 RPM - Sanding belt oscillate distance: 1/4” (6 mm) Motor5HP / 220V / 60Hz Belt Size230 x 3520mmn Frint Table Size (L x W)1210 x 300mm Dust Port 4”

37” Capacity single head 230 volt 3phase

Bob Hanna Double Head Notcher -The notcher has been in production -Replaced electrical -Replaced Bearings and anything that was needed to make the machine run flawlessly -Production rate is 1 notched stringer per second -Hard to find and extremely reliable

Bob Hannah Board Chamfer

2019 Bobcat T870 Hi-Flow -838 hours -Brand new wide zig zag tracks -Forestry Package -Enclosed cab with heat and A/C -Joystick with 2 speed -Standard and hi flow -Power quick attach -Self level bucket -Reverse fan -Deluxe screen with keyless start -Air ride seat -Foot throttle

Bobcat Mulcher M#FRST CT TR FRC50, Double Carbide, 62 Wide, 2200#

MLS Number 13686545 2019 Bobcat S570 T4 Skid Steer 679 hours Gauges work Enclosed cab Diesel Tires 60% Ready to go. No repairs needed.

Bobcat skid steers Believed to be mid 70s Parts machines 2 available Make offer

BOBCAT T-595 Compact Track LoaderAll the material-handling performance and attachment versatility you need to accomplish more is ready for your command.Specifications: -- Horsepower: 74 HP -- Engine Fuel: Diesel -- Rated Operating Capacity (ISO): 2,100 Lbs -- Operating Weight: 7,822 Lbs -- Ground Pressure (Rubber): 5.1 PSI -- Auxiliary Std Flow: 17.1 GPM -- Auxiliary High Flow: 26.7 GPM -- Engine Cooling: Liquid -- Hours: 1,587Equipped with: -- A/C and Heat -- Power attach -- Rubber Tracks -- Keyless Coded Access -- Pilot Controls -- Standard Hydraulics -- Standard Bucket -- Joystick Control -- Backup Alarm -- Operating Lights -- Suspension Seat -- Engine Shutdown -- Bob-Tach Attachment System -- Top Window -- Spark Arrestor Muffler

2017 BOCAT T740 TRACKED LOADER 2,500 HOURS 75% U/C GOOD TRACKS HEAT AND AC AUX HYD GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTH DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM