Mellott For Sale

2015 Cascadia Day Cab DD15 Engine DT 12 Transmission 551,638 Miles

2010 Freightliner M2 Crane Truck National 400B Crane New Cable 49648 Miles

MLS Number 12709353 2007 Freightliner M2 Flatbed Truck 271,372 miles Mercedes Benz engine Allison 6 speed automatic Not CDL 27'3" bed Air brakes spring suspension

2021 Freightliner M2 Bucket Truck Odometer38,296 miles Stock#1367 VIN 1FVACWFD1MHMR2977 Engine Make- Cummins Engine Model-6.7L ISB 240 Engine HP -240 Fuel Type Diesel Drivetrain Trans Make- Allison Trans Model- 2500RDS Trans Speed- Auto Boom Make Altec Boom Model LR7-60E70RM Boom Serial# 1120FF13027 Capacity/Full Reach 75' Boom-Type Rear Mount Class 7 Delivery is available at the buyer’s expense

2011 Freightliner M2 Chip Truck, 116,000 miles, 6 Speed Manual Transmission. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2003 Freightliner M2 106 12ft flatbed Bed is almost new Bed has gooseneck ball Pintle hitch and receiver hitch Airlines have been routed to the back Has backup camera that shows gooseneck ball and rear camera for backing/hooking up trailer Cat C7 engine Allison auto transmission 241k miles No AC from factory

Frick 4 Head Block Carriage With Track & Carriage Drum Drive, Husk, Cab & Controls

Frick 38" 4 Head Block,Track, Paneagraph,Husk frame cab controls, Top Saw 36" and 56" Blade on Husk, Carriage & Track with T-Berry carriage Drive.

Frick 3 HB carriage, track, husk, cab & controls

Parts machine log turner hydraulic power pack other parts

1980's Frick O1C Circular sawmill -2 saw 50 H,P Vertical edger -150 H.P electric motor -Deck is a 4 strand 25' Melot and Turner -Carriage has 4 Head Blocks with air dogs and tapers. -Mill is disassembled and ready to move now. Will have machinery on site to load mill up.

Frick 00 Sawmill 4 head block 471 Detroit (missing radiator) 4 saws Steel track New wheels and bearings Needs some work

Frick Timber-Tiger 10" Double Arbor Gang Rip Saw 36" opening includes 15' shifting infeed with 10" ladder back chain. (2) 300hp 1775 RPM electric motors

Frick Gang Edger (no motor) 636 S/N 160 with Gang of Blades.

Frick Saw Husk with Top Saw

Frick Sawmill 4 Head Block Mounted on a drop deck trailer. Everything folds up for transport. Includes: Cummins motor

Friulmac Floormat EQ Double end TenonerEach side equipped with top & bottom trims and (1) cope heads.Capacity: -- 1,500 mm ( 59") Max. x 225 mm ( 8.86") min. opening; -- Width 30 mm (1.18"), 250 mm (9.84") -- Thickness: 10 mm (.39") min. 35 mm (1.38") max.Includes: -- Motorized opening with LCD touch screen on the control panel, -- Hopper feed Each side equipped with: -- 1st Head: Top scoring or trim saw, 4 HP motor, saw blade max 150 mm diam. with 30 mm bore, rotation 8,500 RPM. -- 2nd Head: Bottom scoring or trim saw, 4 HP motor. saw blade max 150 mm diam. with 30 mm bore, rotation 8,500 RPM -- 3rd Head: High speed Vertical cope head, 7.5 HP - 6,800 RPM, minimum tool diameter 160 mm, maximum 220 mm, arbor diameter 40 mm. -- Variable speed feed from 4 to 25 meter/min. -- SIEMENS "Simatic" Touch-screen control for most machine functions; important station adjustments with mechanical digital readouts; manual hopper feed with 9" max. width. -- Feed system with: Rubber top chain pads, overhead holddowns with continuous V-type belts.Complete with: -- Full safety sound enclosure and separate operator control console. -- Voltage transformewr for 460 volts (to be confirmed)

FRIULMAC - Dual-Feed, ...Double End Cut-Off SawFor squaring workpieces and for transportation to a Planer or Moulder with a straightening table.Specifications: -- 79" Max. (2,000 mm) opening from Saw to Saw. Motorized opening with LED readout on the control panel; left-hand fixed with left-hand fence line. -- Hopper Magazine - material capacity: Min. length: 7.87" (200 mm), max.: 79" (2,000 mm); width: 1-1/8" (30 mm) to 6-3/4" (170 mm); and thickness: 0.59" (15 mm) min. up to 2-3/8" (60 mm) max.; hopper stack height: 23-1/2" (600 mm).Each side is equipped with: -- (2) Trim saw motors, 5.36 HP each; saw blade dia. 9.84" (250 mm). -- Hydraulic feed drive unit: 4 HP (3 kW) motor. -- Trimming & throughput capacity: Up to (55) pieces/Min.NOTE: Voltage transformer for 600 Volts available with the machine

Friulmac Rondamat E End Matcher