Equipment For Sale

Doosan D32S | Engine Rebuilt Last Year | Diesel

2016 Doosan DX140LCR-5, Hydraulic Thumb, 36" Digging Bucket, 4320 Hours, Rubber Pads on Steel Tracks.

2017 Doosan 300, with Waratah 624, 14,000 hours

2016 Doosan 225 with rotobec 360 grapple. Weight 44,200 lb Transport length 31.5 ft Transport width 9.8 ft Transport height 9.78 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

DOOSAN DX-180LC-3 Crawler Excavator Specifications: -- Engine Model: DL06 -- Gross Power: 122 HP -- Track Size; 24" -- Bucket: 42" -- Max Cutting Height: 29.37ft inJ -- Max Loading Height: 20.54ft inK -- Max Reach Along Ground: 28.19ft inL -- Max Vertical Wall Digging Depth: 15.29ft inM -- Max Digging Depth: 18.77ft in -- Operating Weight: 38933 Lbs -- Fuel Capacity: 74 galEquipped with: -- Auxiliary Hydraulics -- Hydraulic Quick Coupler -- Hydraulic ThumbNote: Hours approx. 4,165 and being used.

Aluminum Open Top, Spring Suspension, Aluminum Top Hinge Door, Aluminum Floor, 22.5 Tires Slide Tarp, Extruded Aluminum Top and Bottom Rail, Side Post on 16" Center Settings, Aluminum Prepainted White Sides, Front and Rear Ladders Same trailer with Shurco Lock and Roll tarp $42,500 Same trailer with Live Floor $69,900 Prices are plus FET LMI is your go to source for semi-truck trailers located in Waverly, Tennessee! We have been family owned and operated since 1980. We are North America’s largest stocking dealer of lowboy trailers. We are proud to be ranked #1 in New Trailer Sales for Pitts Trailers since 2009, Dorsey’s Top Dealer since 2015, Jet’s largest detach dealer, and Landoll’s Top 3 Dealer since 2019. Our inventory also includes new and used forestry, scrap, and material handling equipment and trailers, and we’re proud to be an authorized dealer for Barko, Robotec, CSI, and Demco. We also carry parts for the equipment lines we carry. Give us a call today and we will get your parts shipped out quickly. Need your purchase moved? We have a network of over the road trucks to get your trailer to you ASAP! Need your purchase financed? We offer financing options to fit your needs. We accept and welcome used trade-in trailers, as well as purchase used trailers. Our location stocks and install on-demand the following: toolboxes, ramp kits, chains, binders, straps, bungees, bulkheads, headache racks, tarps, sliding tarp systems, aluminum wheels, new and used tires, everything you would need for your flatbed, drop deck or lowboy. Check out our inventory online. If you don’t find what you’re looking for, contact us and we’ll help you track it down. We look forward to serving you!

Aluminum Open Top Live Floor, Spring Suspension, Aluminum Rear Barn Style Doors, Aluminum Floor, 22.5 Tires, Shurco Lock and Roll Tarp, 4000 Series Hallco Floor, Extruded Aluminum Top and Bottom Rail, Side Post on 12" Center Settings, 12" Crossmembers, Aluminum Prepainted White Sides, Front Ladders Air Ride Sliding Tandem 48x102 $77,900 Air Ride 45x102 $72,500 Prices are plus FET LMI is your go to source for semi-truck trailers located in Waverly, Tennessee! We have been family owned and operated since 1980. We are North America’s largest stocking dealer of lowboy trailers. We are proud to be ranked #1 in New Trailer Sales for Pitts Trailers since 2009, Dorsey’s Top Dealer since 2015, Jet’s largest detach dealer, and Landoll’s Top 3 Dealer since 2019. Our inventory also includes new and used forestry, scrap, and material handling equipment and trailers, and we’re proud to be an authorized dealer for Barko, Robotec, CSI, and Demco. We also carry parts for the equipment lines we carry. Give us a call today and we will get your parts shipped out quickly. Need your purchase moved? We have a network of over the road trucks to get your trailer to you ASAP! Need your purchase financed? We offer financing options to fit your needs. We accept and welcome used trade-in trailers, as well as purchase used trailers. Our location stocks and install on-demand the following: toolboxes, ramp kits, chains, binders, straps, bungees, bulkheads, headache racks, tarps, sliding tarp systems, aluminum wheels, new and used tires, everything you would need for your flatbed, drop deck or lowboy. Check out our inventory online. If you don’t find what you’re looking for, contact us and we’ll help you track it down. We look forward to serving you!

2013 Dorsey 45’ walking floor chip van trailer. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Aluminum Open Top Live Floor, 48x102, Air Ride Sliding Tandem, Aluminum Rear Barn Style Doors, 22.5 Tires, Shurco Lock and Roll Tarp, Hallco 4000 Series Floor with 3/16 Slats, Extruded Aluminum Top and Bottom Rail, Side Post on 12" Center Settings, 12" Crossmembers, Aluminum Prepainted White Sides, Front Ladders Air Ride 45x102 $72,900 Spring Ride $69,900 Prices are plus FET LMI is your go to source for semi-truck trailers located in Waverly, Tennessee! We have been family owned and operated since 1980. We are North America’s largest stocking dealer of lowboy trailers. We are proud to be ranked #1 in New Trailer Sales for Pitts Trailers since 2009, Dorsey’s Top Dealer since 2015, Jet’s largest detach dealer, and Landoll’s Top 3 Dealer since 2019. Our inventory also includes new and used forestry, scrap, and material handling equipment and trailers, and we’re proud to be an authorized dealer for Barko, Robotec, CSI, and Demco. We also carry parts for the equipment lines we carry. Give us a call today and we will get your parts shipped out quickly. Need your purchase moved? We have a network of over the road trucks to get your trailer to you ASAP! Need your purchase financed? We offer financing options to fit your needs. We accept and welcome used trade-in trailers, as well as purchase used trailers. Our location stocks and install on-demand the following: toolboxes, ramp kits, chains, binders, straps, bungees, bulkheads, headache racks, tarps, sliding tarp systems, aluminum wheels, new and used tires, everything you would need for your flatbed, drop deck or lowboy. Check out our inventory online. If you don’t find what you’re looking for, contact us and we’ll help you track it down. We look forward to serving you!

1991 Dorsey open top walking floor trailer; swinging doors; spring ride; serial number 1DTV75W22MA200926

Doucet Clamp Carrier Model SRH-40-8.5-240-36 40 Section Clamp 8.5' Wide (240) 2-1/2" x 36" Clamps - Rapid Change Voltage: 480/3/60

- 16.5' long - 16 rotating arms and a total of 288 - 32" clamps

DOUCET DRAWER MASTER DWM-36 36" Universal Drawer Box Assembly Clamp Specifications: Assembles drawers with Standard Finger-Type Dovetails, Sliding-Type Dovetails, Bored & Doweled Drawers, and Tongue & dado box joints. Cap. 10" H x 24" W x 36" L. Equipped with: Fixed left jaw, Manually adjustable right jaw, with Rapid set jaw opening. Double-acting pneumatic cylinders. 2-Hand push-button operation. “Quick” Mode & "Progressive Compression" mode, Operates as a jog button to allow for easy fitting of bottom panel in lateral grooves. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

DOUCET BT3-30-5-23-G-PT Return Conveyor for Edgebanders Specifications: Right-hand feed, with Left-hand return. Min. part size 4" x 12". Max. panel size (with operator assistance supporting then turning panels) 45" x 96". Equipped with: 1-1/2’ L Infeed roller conveyor section, with (5) 23-1/4” W & (2) 34-1/4” W Rollers. 34-1/4” W x 5-1/2’ L x 35” H Receiving table, with Automatic/Manual height adjustment 2". (8) 3/8” Dia. transfer belts, (3) on 3” Centers, (2) on 6” Centers, & (3) on 9” Centers. 29-1/2” W x 5-1/2’ L x 34” H Return table. 29-1/2” W x 18’ L x 34” H 3-Section Return conveyor, with 5-1/2” W x 6’ L Gravity roller conveyor side extension. All rollers 1-7/8” Dia. covered line shaft on 3” centers. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

"NEW" Doucet RC - STOCK Gluer - Table top unit for glue applications on a smaller scale. Motorized stainless steel roller equipped with a 2 Litre capacity reservoir easily removable for clean up. -- Spread roller: Stainless steel with roller dimension 8" X 3 1/2"; speed of roller 50 FPM. -- Table top dimension: 20-1/2" x 13".

DOUCET SDM-M-30-72 Frame and Cabinet Door ClampDesigned for quick and accurate clamping & squaring of miter and regular cabinet doors.Specifications: -- 5-1/2" x 12-1/2" Min. door size, 30" x 72" max. door size. -- (1) Fixed vertical clamp, (2) mobile vertical clamps on roller bearings for effortless positioning. -- (1) Mobile horizontal clamp with a unique "gas spring" assisted lever for effortless centering; pressure is distributed with 4' dia. air cylinders. -- "Progressive Flow" clamping system @ 80 PSI; 675 Lbs of clamping pressure per clamp; operator working height adjustment.

DOUCET - DRAWER MASTER DWM-36: 36" Universal Drawer Box Assembly ClampSpecifications -- Assembles drawers with: Standard finger-type dovetails; sliding-type dovetails; bored & doweled drawers; tongue & dado box joints. -- Capacity: 10" H x 24" W x 36" L.Equipped with: -- Fixed left jaw, manually adjustable right jaw; Rapid set jaw opening. -- Double-acting pneumatic cylinders. -- 2-Hand push button operation. -- “Quick"; Mode & "Progressive Compression" mode; operates as a jog button to allow for easy fitting of bottom panel in lateral grooves.

DOUCET MFE 300 Lateral chain feeder for moulders and optimizers -- 3'0" x 16'-0" working deck for material length 2'0" - 16'0"; width 2" to 9.5" and thickness 1/2" to 4". -- Feed system: Hydraulic variable speed 50-300 FPM with a 20 HP power unit. In-feed (4) roller accelerator; (2) top steel rollers and (2) bottom drive roller. Additional idler rollers along feed fence to support lumber during feeding. -- Chains: Transport length of lateral chain feeder 3'0". (8) strands of C2060 chains on pneumatic up/down device to release lateral pressure on board when feeding. -- Pedestal: Feeder controls mounted to pedestal with extended cable. Interface relay to stop feeder when moulder is stopped. -- Adjustments: Tool less adjustment handles for quick setups. Easy access to for thickness adjustments at front side of feeder. -- AVAILABLE OPTIONSOne (1) set of four (4) feeding wheels made of steel with hardenedsurface teeth $ 1 000.One (1) set of four (4) feeding flat wheels made of steel, 2" wide insteadof 1" for wide material feeding $ 500.One (1) set of four (4) feeding flat wheels made of steel 1" wide $ N/C.Guiding Tunnel between feeder and moulder,Standard Guiding Tunnel (4' long) $ 1 650.Standard Short Guiding Tunnel (32" long) $ 2 100.Complete Guiding Tunnel (4' long) $ 2 700.Complete Guiding Tunnel with adjustable fence (4' long) $ 3 800.Motorized Guiding Tunnel (4' long) on request.Additional chain transfer length capacity (up to a maximum of 6additional feet) For MFE-300-16 sold per foot $ 1 685. Note: More than 6 add. feet: price upon requestSteel plates between chainsFor MFE-300-16 $ 1 050.Platen chains recommended for softwood speciesFor MFE-300-16 $ 2 850.One (1) additional chain for shorter material down to $ 1 750.18" min. lengthPressurized lateral guide with roller bearing end $ 1 400.Powered lateral guide with roller and side guides on request.Custom working height on request.

Doucet MSP-CR-19-48-15-TRF-C-8-7 Conveyor

DOUCET - 16-SECTION: Clamp Carrier (Hydraulic)Specifications -- (16) Sections; 8-1/2' width. -- (6) Clamps per section; (86) clamps total. -- 32" Clamp opening (rapid change) with: 2-1/2" High jaws.Complete with: -- 5 HP Hydraulic power pack and motor for rotation. -- Hydraulic clamp tightening. -- Pneumatic overhead panel flattener.NOTE: Tear down included!