Equipment For Sale

New take out air suspension seats with base from 2022 Freightliner

2006 Freightliner Classic, Nice! 46,000 full locking rears, 12,000 steer, air ride, sliding 5th wheel, 24.5 rubber @ 90%, extra light, dual wetline, 18 speed, integrated sleeper, new leather seats. $38,000 OBO 315-408-8249

2006 Coronada, 46,000 rears w/diff lock, 14,000 steer, Air Ride, heavy frame, 550HP series 60 Detroit, 14L, deleted, 18 speed, dual wetline, setup to run log loader. $38,000 OBO 315-408-8249

1980's Frick O1C Circular sawmill -2 saw 50 H,P Vertical edger -150 H.P electric motor -Deck is a 4 strand 25' Melot and Turner -Carriage has 4 Head Blocks with air dogs and tapers. -Mill is disassembled and ready to move now. Will have machinery on site to load mill up.

Frick Sawmill 4 Head Block Mounted on a drop deck trailer. Everything folds up for transport. Includes: Cummins motor

Frick 00 Sawmill 4 head block 471 Detroit (missing radiator) 4 saws Steel track New wheels and bearings Needs some work

Parts machine log turner hydraulic power pack other parts

Frick 4 Head Block Carriage With Track & Carriage Drum Drive, Husk, Cab & Controls

Frick Saw Husk with Top Saw

Frick 3 HB carriage, track, husk, cab & controls

Frick Gang Edger (no motor) 636 S/N 160 with Gang of Blades.

Frick Timber-Tiger 10" Double Arbor Gang Rip Saw 36" opening includes 15' shifting infeed with 10" ladder back chain. (2) 300hp 1775 RPM electric motors

Frick 38" 4 Head Block,Track, Paneagraph,Husk frame cab controls, Top Saw 36" and 56" Blade on Husk, Carriage & Track with T-Berry carriage Drive.

FRUILMAC - RANDOMAT-E: Random Length End MatcherFor end matching flooring or cabinet & entry door rails; the feed through system allows continuous feeding of random length parts with any kind of profile.Specifications -- Width cap.: 1-3/16" - 9-7/8"; length cap.: 6-5/16" x 137" length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness capacity. -- (10) Cycles/Min (approx.): Depending on part length & width. -- Feed system in/out with: (2) 156" Long x 11" wide powered infeed & outfeed belt conveyors; parts automatically fed & positioned with sensors; positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle: Automatic; driven by (2) 1-1/2 HP motors. -- Parts: Conveyed past the 1st & 2nd shaper head; automatically reversed; positioned to a positive stop for the 2nd cut on the other end of the part. - At the same time, 1st shaper head would be copying the 1st end of another part.Equipped with: -- Twin 7-1/2 HP - 7,500 RPM high-speed shaper motors, which pneumatically traverse in tandem for each cutting cycle. -- Touchscreen SIEMENS Controller; PLC controlled conveyor & shaper cut cycle for automatic operation. -- Variable feed speed conveyor line; shaper head advance with led readout on the controls. -- Cutting station with: Overhead holddown wheels; 4-point pneumatic clamping with: (2) Overhead & (2) horizontal clamps.

FRIULMAC - MULIREX: End Matcher with: Stackable SpindlesEnd Matcher with: Stackable Spindle for fast Changeover!Equipped with: -- (2) Profiling Motors: 10 HP (7-1/2 kW). -- (2) Tool changer motors: 1/2 HP (0.25 kW). -- (2) Infeed/Outfeed conveyor belt motors: 1-1/2 HP (1.10 kW). -- Central conveyor belt: 3/4 HP (0.55 kW). -- Min. part length: 4-7/8" (120 mm). -- Min. part width: 1-3/16" (30 mm). -- Max. part width: 9-7/8" (250 mm). -- Min. part thickness: 1/2" (10 mm). -- Max. part thickness: 1-3/16" (30 mm). -- Min. cutter diameter: 6-5/8" (170 mm). -- Max. cutter diameter: 7-7/8" (200 mm). -- Diameter spindles: 50 mm. -- Spindle length: 11-1/4" (285 mm) under the nut for stackable tooling. -- Cutter speed: 9,000 RPM. -- Dust ports: (4) 4-3/4" for each spindle (2 on the top & 2 on the rear side).

FRUILMAC - RANDOMAT E: End MatcherFor end matching flooring, cabinet & entry door rails, or tongue & groove. The feed through system allows continuous feeding of random length parts with any kind of profile. -- Capacity & Description -- Width cap.: 1-3/16" x 9-7/8'; Length cap.: 6-5/16" x 137" (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness cap. -- Approx. (10) cycles/Min depending on part length & width. -- Feed System with: (2) 120" Long x 10" wide powered infeed & outfeed belt conveyors; parts are automatically fed & positioned with sensors. -- Positive stop to the 1st vertical shaper head (2nd shaper head is next to the 1st one); cope cycle is automatic. -- Parts are conveyed past the 1st & 2nd shaper head; automatically reversed & positioned to a positive stop for the 2nd cut on the other end of the part. - At the same time, the 1st shaper head would be coping the 1st end of another part.Equipped with: -- Twin 7-1/2 HP - 7,500 RPM high-speed shaper motors, which pneumatically traverse in tandem for each cutting cycle. -- Cutting station with: Overhead holddown wheels; 4-point pneumatic clamping with: (2) Overhead & (2) horizontal clamps. -- Controller & Operator Interface: Keypad: SIEMENS Controller; PLC controlled conveyor & shaper cut cycle for automatic operation; variable feed speed conveyor line; shaper head advance with LED readout on the controls. -- Includes Infeed & Outfeed Conveyors.

Friulmac Rondamat E End Matcher

FRUILMAC RANDOMAT-E End Matcher;For end-matching flooring or cabinet & entry door rails; the feed-thru system allows continuous feeding of random-length parts with any kind of profile.Specifications: -- Width cap. of 1-3/16" to 9-7/8"; length cap. of 6-5/16" x 137" length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness capacity. -- Approx. (10) cycles/Min depending on part length & width; -- Feed system with (2) 120" long x 10" wide powered infeed & outfeed belt conveyors, parts are automatically fed & positioned with sensors, and a positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle is automatic. -- Parts are conveyed past the 1st & 2nd shaper head, automatically reversed, and positioned to a positive stop for the 2nd cut on the other end of the part. At the same time, the 1st shaper head would be coping the 1st end of another part.Equipped with: -- Twin 7.5 HP - 7,500 RPM high-speed shaper motors, which pneumatically traverse in tandem for each cutting cycle. -- Touch-screen SIEMENS Controller, PLC controlled conveyor & shaper cut cycle for automatic operation. -- Variable feed speed conveyor line; shaper head advance with led readout on the controls. -- Cutting station with overhead holddown wheels and 4-point pneumatic clamping with (2) overhead & (2) horizontal clamps.Includes:(4) set of used tooling

FRUILMAC RANDOMAT E - End Matcher; -- For End Matching flooring or cabinet & entry door rails or tongue and groove. The feed-thru system allows continuous feeding of random length parts with any kind of profile.÷Capacity & Description: -- Width cap. 1-3/16" x 9-7/8'; length cap. 6-5/16" x 137" length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness cap. -- Approx. (10) cycles/Min depending on part length & width; -- Feed system with (2) 120" long x 10" wide powered infeed & outfeed belt conveyors, parts are automatically fed & positioned with sensors. -- Positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle is automatic. -- Parts are conveyed past the 1st & 2nd shaper head, automatically reversed and positioned to a positive stop for the 2nd cut on the other end of the part. At the same time the 1st shaper head would be coping the 1st end of another part.Equipped with: -- Twin 7.5 HP - 7,500 RPM high-speed shaper motors which pneumatically traverse in tandem for each cutting cycle. -- Cutting station with overhead hold-down wheels and 4-point pneumatic clamping with (2) overhead & (2) horizontal clamps. -- Controller & Operator Interface: Key Pad SIEMENS Controller, PLC controlled conveyor & shaper cut cycle for automatic operation, variable feed speed conveyor line, and shaper head advance with LED readout on the controls. -- Includes Infeed and Outfeed Conveyors

Friulmac Floormat EQ Double end TenonerEach side equipped with top & bottom trims and (1) cope heads.Capacity: -- 1,500 mm ( 59") Max. x 225 mm ( 8.86") min. opening; -- Width 30 mm (1.18"), 250 mm (9.84") -- Thickness: 10 mm (.39") min. 35 mm (1.38") max.Includes: -- Motorized opening with LCD touch screen on the control panel, -- Hopper feed Each side equipped with: -- 1st Head: Top scoring or trim saw, 4 HP motor, saw blade max 150 mm diam. with 30 mm bore, rotation 8,500 RPM. -- 2nd Head: Bottom scoring or trim saw, 4 HP motor. saw blade max 150 mm diam. with 30 mm bore, rotation 8,500 RPM -- 3rd Head: High speed Vertical cope head, 7.5 HP - 6,800 RPM, minimum tool diameter 160 mm, maximum 220 mm, arbor diameter 40 mm. -- Variable speed feed from 4 to 25 meter/min. -- SIEMENS "Simatic" Touch-screen control for most machine functions; important station adjustments with mechanical digital readouts; manual hopper feed with 9" max. width. -- Feed system with: Rubber top chain pads, overhead holddowns with continuous V-type belts.Complete with: -- Full safety sound enclosure and separate operator control console. -- Voltage transformewr for 460 volts (to be confirmed)