Klamath For Sale

TIMESAVERS - 2321-23-21: Planer Sander (2) Heads2-Head; 36" width cap.Specifications -- 1st Head. 6" Dia. Helical head with: (6) Spirals of 4-sided carbide inserts; 25 HP motor. -- 2nd Head. Combination head with: 5-1/2" Dia. contact roll and 2-1/2" wide finishing platen; 20 HP motor; sanding head with 37" x 75" Abrasive belt with "POSI-TRAK" electronic tracking. -- Dial indicators for height adjustments. -- Conveyor belt feed with Variable feed speed 20 - 45 FPM; automatic conveyor belt tracking. -- Anti-kickback fingers on infeed; planer head with sectional infeed shoe and double hold-down rolls on outfeed; double infeed and outfeed rubber-covered hold-down rolls on the sanding head. -- Motorized part thickness adjustment: 0" - 5" With mechanical digital readout. -- Minimum part length: 15"; Pass line height: 33" - 38". Complete with: -- Controls mounted on belt loading side; air activated caliper disc brakes on all heads; load meters for each head; 14" infeed loading area. -- Dust extraction: 3,500 CFM; compressed air usage: 3 CFM @ 90 PSI. -- Total load amps at 230 Volts: 145 Amps.

Timesavers 37" Planer Sander Helical Planer Head

TIMESAVERS 36" SPEEDSANDER WIDE BELT SANDER1-Head; 36" width cap.; combination sanding head with: 4" Dia. contact roll & 1-1/2" wide polishing platen; 7-1/2 HP, 1-phase motor. -- Abrasive belt size: 37" x 60" with: Electronic abrasive belt tracking; 4" max. thickness with: 34" - 38" pass line; rough-top conveyor with: 5 - 20 FPM variable feed via AC Frequency drive. -- Equipped with: Air activated emergency brake; outboard door interlock; infeed emergency stop bar; emergency stop buttons on outfeed. -- Includes: (1) 4" Dust outlet; ProScale digital readout; casters.

Only 697 hours, taken from service (2) top heads - one orbit, one brush (1) 3HP main orbit motor (1) 3HP feed motor (1) 1HP brush motor (1) 1HP oscillation motor 460V Max. stock width 36" Max. thickness 6" 32-38" variable passline height 2,000 CFM @ 5,000 FPM exhaust air requirements

Timesaver Mdl 337-6 36" Belt Sander S/N 18395

Tipton Iron Works Sharp Chain Scragg Mill

22" blade Manual operated 460v 3phase 15 HP motor

2024 TMC CANCELA Forestry Mulcher, DCR Style Rotor, Knife Teeth, Hydraulic Door, 2800#, Please Call For More Info.

60' Toledo 100 Ton Truck Scale with Digital Reader. S/N 1000796-1RP Out and Ready to Load

Position 1 005023 Panel Feeding and Loading TOMASSINI-RAPID/C 100-130 DOP Position 2 005024 Roller Conveyors TOMASSINI-TA CINGHIE-SPEC Position 3 005029 Roller Conveyors TOMASSINI-TA CINGHIE-SPEC Position 5 005030 Roller Conveyors TOMASSINI-TA 78 130 S-SPEC Position 7 005031 Brushing Machines MECCANICA VIESSE-SP 1300 Position 8 005032 Panel Stacking and Offloading TOMASSINI-RAPID/S 100-130 DOP

Pneumafil – New Style 10’ ·· Pneumafil – Old Style 12’, 10’, 8’ ·· Torrit – 8’, 10’, 12’ ·· Carter Day – 10’ or can be cut to less ·· Airlanco – 10’ ·· Mac – 10’ MCF Style ·· Call for Availability

DONALDSON TORIT - 232 RF-8: 24,000 CFM Baghouse Dust Collector (refurbished 2017) with: Rotary Air Lock & AIRCOM 32" Dia. Explosion Isolation Flap Valve (New 2017) -- Specifications. Approx. 10-1/2' Dia. x 24' H Baghouse with: 7-1/2' H Cone bottom & (232) 8' L cloth filter bags totaling appx. 2,414 sq./ft. of cloth area.Air-to-cloth ratio: 9.94:1; Overall system footprint: 25' x 25'. -- AIRCOM - "SNR 800" 32" Dia. SNR (Safety Not Return) Explosion Isolation Flap Valve: S/N 0977003 (2017); certified ATEX EN 15089; Class 2, NFPA Compliant with: Max. air speed 30 m/Sec; max. dust concentration: 4 LEL; KST max. 299 bar m/Sec; pred. max. 0.25 bar; Pmax. 9 bar; pipe structure to withstand pressure: 0.25 Bar; explosion resistance of flap 850: mbar.Min. ignition energy: 3 - 10 mJ; min. ignition temperature 420° C (788° F); temperature range: –20° C to +60° C (-4° f to 140° F); range of applicable volumes: 10 - 60 Cu. meters (33 - 196 cu./ft.); anti-opening locks on both flaps. -- 75 HP - 1,780 RPM, TEFC Motor Driving Blower. Rated at 24,000 CFM @12" SP with: 36" Dia. inlet & 30" x 36" outlet. -- KOGER - Size 12, Rotary Air Lock with: 12" Dia. inlet & 1 HP outlet motor. -- MURPHY-RODGERS - MRT-12: 10 HP Blower. S/N 1272 with: 12" Dia. inlet & 8" x 11" outlet. -- ROOTS - 32 U-RAI: 5 HP Lobe Blower; s/n 0802963165. -- Electrical controls included. -- Actual model: "232FRW8" (Walk-in unit); estimated shipping weight: 15,500 Lbs. -- Available NOW!

DONALDSON-TORIT: 376RFW-10 or 12: Dust Collector45,000 CFM @ 9.7:1 Air-to-cloth ratio; 140" dia. round baghouse with: (376) filter bags of 10' length (oval bags provide for radial movement of bag during cleaning for longer life); total 4,632 sq./ft. filter area. -- Filtration media cleaning via: Floor mounted 7-1/2 HP medium pressure Air Pump (eliminates the need for compressed air; can be susceptible to condensation & freezing); 36" x 65" return air outlet; 48" x 48" inlet for dust laden air. -- Includes: Rotating cleaning air manifold driven by 1/3 HP motor; (1) NEMA-9 solenoid & diaphragm valve, which rotates over the bag openings; walk-in plenum for bag access/maintenance. -- Galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride up of bags once installed; walk-in access door at top of ladder. -- Equipped with: Structural steel support; maintenance platform; caged ladder; bolt-on involute arm; explosion doors (need to be replaced). -- Includes Backward inclined FAN EQUIPMENT: Size 7 BCS floor-mounted Fan set at 45,000 CFM @ 15" SP; belt driven at 1,485 RPM; powered by a 200 HP TEFC Motor via OMRON/IDM E7 Series Inverter. -- 24" Rotary Air Lock at the bottom of the 60° hopper. -- Complete with: Pictured electrical controls are included. -- NOTE: New 200 HP electrical motor was replaced recently. -- Unit had an accidental fire at bottom section near Hopper causing the explosion doors to burst. Unit still working as they are not returning the air. Can be sold with or without replacement of doors; cost of which is negotiable. -- Professional dismantling and rigging available at extra cost. Please call!

TORIT 460-IRD-20 Dust CollectorAn easy and economical solution for a wide range of wood dust collection applications. Downflow air pattern allows airflow & gravity to move filtered dust to collection receptacles for longer bag filter life and reduced pressure drop.Specifications -- 20 HP Direct drive; floor mounted blower. -- 1/3 HP Shaker motor with auto controls. -- Fan inlet: 17". -- CFM: 7,000. -- Set of filter bags. -- Steel elbow from fan to collector. Motor Starter included. -- Existing ductwork available as shown in photos.

Dust Collection System

Reconditioned Torit 156RF10 baghouse

Torit Bag House Dust collecting System

TORIT-DONALDSON ADMC AD8 DRYFLO Cartridge Dust Collector. A Mist collector designed for long-lasting high collection efficiency capture of coolant and machining oil mists in metalworking applications. Even smaller amounts of dust can be filtered in the dirty air stream. -- DRYFLO is a proprietary cartridge which outperforms electrostatic precipitators and mist collectors utilizing standard HVAC envelope and cassette filters. Filter unit features a unique air-side filter retention system allowing for quick filter changes with minimal worker contact with collected oil. -- Also feature three-stage Filtration via a.) prefilter, b.) wrap allowing, c.) the filter cartridge to drain and coalesce smaller coolant mist droplets in to larger droplets. Plus optional fourth stage HEPA filters available for applications where smoke exists or additional efficiency of discharge air is required. -- Overall data: Capable of 17,600 CFM; (8) Filter Cartridges, 1,760 sq. ft. of filter area, -- Complete with: Ground mounted fan powered by a 40 HP motor, belt-driven. Fan includes a variable volume inlet. In prior application clean air was not retruned to building. -- Blower currently setup for approx. 15,000 CFM with 40 HP, Baldor Super-E, 324T frame, 1.780 RPM motor. -- Enclosure dimensions: 133" long, 68" deep, 160" high. Filter weight is 7,300 lbs.

Belfab Dust System Control Starter Panel Control Panel Disconnect Control Panel Transformer Main Blower Stop/Start with running pilot light VFD with air flow control Environmental Rating: NEMA 12 Timebard Type: 22 PIN Cleaner Sensor Type: Delta P+ 2-20 MA Fan Outlet Silencer Fan Stand Timer Pulse Control Pulse Relays 460V/3PH No fan or motor supplied...can be obtaned at an additional price.

TORIT 360-IRD-15 Dust CollectorAn easy and economical solution for a wide range of wood dust collection applications. Down flow air pattern allows airflow and gravity to move filtered dust to collection receptacles for longer bag filter life and reduced pressure dropSpecifications: -- 15 HP direct drive, floor mounted blower. -- 4,800 CFM @ 8" wg, 4,050 CFM @ 9" wg, 2,400 CFM @ 10" wg -- (21) Dura-life filter bags with a cloth area of 192 sq. ft. -- (3) Collection points for plastic collection bags.