Equipment For Sale

JOHN DEERE 324K Compact Wheel LoaderProductive for tight turns and extra agility in close quarters.Specifications: -- Engine Power: 70 HP -- Engine type: YANMAR Diesel -- Full-turn tipping load: 9,766 Lbs -- Bucket capacity range: 1.4–2.0 cu. yd -- Bucket breakout force: 2,364 Lbs -- Operating weight: 14,087 Lbs

2013 Deere 3754 With Waratah 625 Processor, Cab has Heat and AC, Frame Hours 14,000, New Long Block with Low Hours Undercarriage is 80%,One Owner, Ready for the Woods. Weight: 101,651 lbs Length: 32 ft 4 in Width: 11 ft 0 in Height: 9 ft 7 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1998 John Deere 892D-LC Excavator with 8444 hours, Thumb, The oil cooler needs some work. Weight: 65,983 lbs Length: 36.17 ft Height: 11.17 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Deere 548G-3 Grapple Skidder, Has Winch, 14,700 Hours, Well Maintained, Tires are 28L x 26, Good Tread, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Operating Weight 23,690 lb Overall Length 20.77in Overall Width 9.51ft in Height To Top Of Cab 9.88ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Deere 1910E Forwarder, Strong Engine, Has 27,000 Frame Hours, Motor Replaced at 13,000 Hours, Pumps at 7,000 Hours, Drive Motors replaced at 7,000 Hours for Preventative Measures, Slew Bearings and Brass replaced at 9,000 Hours, All Cylinders except Steering Cylinders Replaced at 5,000 Hours ago, Extension Boom and Bucket Replaced Newer Front Window Replaced, New Bucket, Good AC and Heat in Cab.7 New Nokian Tires Replaced the last 4.500 Hours, Boggies, Differential and Planetaries drain clean. Weight - 48,060 lb Length - 35' Height - 12.8' Width - 10.15' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Deere 703G Feller Buncher, Equipped with a FS 20 Cutter Saw Head, Enclosed Cab with Heat and AC Engine was rebuilt around 3,000 Hours ago, 15,000 Frame Hours Undercarriage is 75%, Hi/ Low Range needs some work Ready for the Woods. Weight: 45,325 lbs Length: 13' 7" Width: 10' 7" Height: 11'2" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 John Deere 244L, 3,090hrs., comes w/ bucket, 80% Rubber,

2015 John Deere 75G Mini Excavator with 1,700 hours. New thumb for additional cost. Operating Weight 17,952.3lb Transport Length 20 ft 11 in Transport Height 8 ft 10 in Width 7 ft 7 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc

360 Degree Cutter REDUCED Only 6525 Hours Woods Ready

2019 John Deere 748L2 -7739 hours (using daily) -Tight and dry -35.5 tires -Boom cylinder is being repacked -Grapple turn motor does not work grapple still functions

2016 Deere 853M Feller Buncher with 5,500 hours. Operating Weight 67,704lb Overall Width 10.83 ft in Length Of Track On Ground 12.7 ft in Ground Clearance 31 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Enclosed Cab Heat And Air 6200 Hours 75% U/C 1500 H JD series 4000 Winch LGP Package

2016 John Deere 648L Skidder Winch -Dual Arch with winch -8100 hours -Tight center -Tires 30.5-32 front:85% rear:25% -New bushings in grapple -Cold A/C -Joystick controls -Turn around seat -Heated seat

18445 Hrs Engine Rebuilt at 10,000 Hrs New Hydraulic Pump Last Year All New Cylinders Used Daily

FD22 Saw, 28L tires

2012 JOHN DEERE 848H SKIDDER Dual Arch Grapple Torque Drive Winch One Owner Low Hour 9K REDUCED Well Maintaned AC Works 35.5 3@70 1@ 50

John Maye D-53 Semi Automatic Strapping Machine S/N 84763

JOHNSON LOOSE BAGGING SYSTEMOne Set of (2) Loose Fill Bagging Systems -- Was Bagging Wood Chips in Plastic Bags. -- One Hopper receiving System for the (2) Units -- Two feeding systems -- Complete with Support Legs and Bag Conveyor -- Output Finish Bag Conveyors -- One Unit is Brand New and the Other is in Very Good Working Condition -- Production Rate 6 to 10 Bags Per Minute. -- Could Bag any Type of Free Flowing Material.Price is Loaded on your Truck.

(2)Jones Superior Machine No 54T Band Saws

50 HP Jordan Dual Shaft Shredder with Infeed Conveyor --Overall Length 141" --Overall Width 56" --Overall Height 98" --Cutting Chamber Size 42"x20" --Hopper Size 1.5 - 2 Cubic Yard --Cutter Assembly Height 13.5" --Motor Horsepower 50HP --Approx Chamber Weight 4570 Lbs --The MS-4220 is our most popular mid range shredder, with the power to handle your tougher jobs and a cost that can fit into your demanding budget. The MS-4220 can be used to shred paper, plastic, passenger tires, carpet and an many other materials. It is designed with counter rotating dual speed shafts and the cutting group continuously changes knife tip position. This helps the knives grab and pull through hard to hold materials. The MS-4220 Industrial Shredder offers mid size chamber capacity and the horse power to handle many of the most demanding applications. For a cost effective shredder, this unit can’t be beat for volume reduction and material shredding. The MS-4220 Industrial Shredder is a work horse.