Equipment For Sale

New Fuses | New Main Breaker | Hydraulic Drive | Comes with 50 Blades

Late 90's model | 480v

Baker 6-head resaw, electric drive, good working condition

Baker Pallet De Stacker

2 - Baker Stacking Racks available

Baker Products’ Self-Dumping Steel Hoppers can be used to collect almost anything. It has a reinforced base and continuous weld. When the hopper is full, you can easily pick it up with almost any forklift and dump it simply by pulling a lever. It has a lock, so the load will not dump by mistake. The Baker Self-Dumping Steel Hopper is a convenience every company should have. A. 2 yd (1,828 mm) 603 lbs. (274 kg) B. 2 yds (1,828 mm) 805 lbs. (365 kg) C. 3 yds (2,743 mm) 971 lbs. (440 kg) A. 44” (111.8 cm) 59” (150 cm) 69½” (176.5 cm) B. 45½” (115.6 cm) 57½” (146 cm) 64½” (163.8 cm) C. 55” (139.7 cm) 58” (147.3 cm) 71” (180.3 cm) Forklift Opening: 2½” (6.4 cm) high by 48½” (123.2 cm) wide

3650 Baker Super Streak Mills

Baker Chamfer Machine

Baker Furnace Inc Dry Kiln 3 phase 110V

Dry Kilns (cream), Conventional Heating System, 600,000 BTU Propane, single phase, 120V control voltage, 3 phase 208V motor voltage, open volume: 672 cubic feet, max operating temperature: 500F, owners manual included, excellent condition, 2 units available

Baker Furnace Inc Kiln 110V 3 Phase

Complete Drying System, 10.5’ x 32’ Triple Pass Drum Dryer, Wood Or Gas Dryer, 300 HP Fan & Cyclone, Excellent Condition!

BALEMASTER - 48 X 72, ...Horizontal Closed Door Baler -- Designed for baling of whole or flattened corrugated boxes. -- Large feed opening to accommodate feed of larger material. -- Large 48" x 36" x 72" bale; weighs up to 1,700 pounds. -- Perfect for a Qarehouse application. -- 25 HP Moroe

BALEMASTER E-1290 Auto-Tie Horizontal Baler with AMERISHRED AMS-7500 Shredder/Conveyor/TipperBaler Specifications: -- Cylinder: 10" -- Bale size: 36" x 40" x variable -- Motor: 75 HPShredder Specifications: -- Cut: 5/8" -- Motor: 75 HPSystem equipped with: -- Enduraveyor Baler Feed Conveyor -- Discharge Conveyor -- Metering Feed Conveyor -- Cart Tipper

BALEMASTER - 4550G-10: Auto-Tie Horizontal BalerSpecifications: --27"; x 40"; Opening. -- 50 HP. -- 10"; Cylinder. -- 30"; x 40"; x Variable Bale.

BALEMASTER - EO-650: Horizontal Auto-Tie Baler Specifications: • 25 HP Motor.• 8"; Main Cylinder.• Hopper Opening: 46";x 50";.• Bale Size: 48"; x 30"; x (variable).• Main Ram Face Pressure: 75 PSI.• System Pressure: 2,000 PSI.• Total Compression Force: 100,500 Lbs.

BALEMASTER 772 AO WIDE MOUTH HORIZONTAL BALER -- 25 HP motor -- Dual door cylinder -- Bale size 48" W x 26" H x 48" L -- Feed chute cross section 46" W x 48" L -- Air to Oil cooler included -- Number of bale ties 5 -- Loaded on your truck

BALESTRINI MINI C 2500 DOUBLE SIDED TEMPLATE PROFILE SHAPERSpecifications: -- (2) Offset shaping heads with 10 HP (7.5 kW), 230/460 volt three phase drives. (1 each side) -- Maximum reciprocating length 98" (2500 mm). -- Maximum height 7" (180 mm). -- Maximum width between spindles 8", and shaping heads are staggered for full end rounding. -- 1¼"; Diameter work arbors with 7″ under the nut capacity, and Spindle speed of 8400 RPM -- Hydraulic stroke of 9-3/4″ wide x 110″ long tee slotted work table, with feed speeds of 3 - 49 feet per minute (1-15 m/Min.) powered by 3 HP, 230/460 volt three phase hydraulic pump -- Overhead beam clamp bar with (4) adjustable clamps. -- Push button operator control station.

Balestrini "PICO" Round End Tenoner:Specifications -- Left & right "twin" tilting tables (one table is always in the cutting position); 14" x 9" tables tilt 0ø - 20ø, both table fences with pin stops for indexing stile and rail doors. -- Fences swivel up to 45ø, each table with vertical pneumatic holddown; 4 HP cutter block motor, 1 HP cutter block rotation motor, 9,000 RPM spindle speed. -- Capacity: 3-15/16" (100 mm) Max. tenon length, 1-3/16" (30 mm) max. thickness, and 1-31/32" (50 mm) max. depth. - Hourly production rate of (600 - 700) tenons.

Balestrini "MICRON" Slot Mortiser:Sprcifications -- Dual spindle system, (1) each side with tables and overhead holddown, 3 HP - 9,000 RPM spindles, (60 - 350) oscillations/Min, 18 mm collet dia. -- Capacity: 4-23/32" (120 mm) Max. length of slot, 3-1/8" (80 mm) max. slot depth, 1-3/16" (30 mm) max. slot thickness. - Hourly production rate of (500 - 800) slots.