Equipment For Sale

2014 Bandit Beast 4680 Track Horizontal Grinder, Equipped with a Tier 2 CAT C-27 1050 HP Turbo Diesel Engine with 3,500 Hours, Reverse Fan ,Compressor , Magnetic Pulley Head on Shorter Length Discharge Chute , Additional Screens all sizes, Undercarriage 95% Wireless Remote Control with Tether Cord Electric Winch for screen installation... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Bandit SG-40 Stump Grinder, Rev Wheel, 38HP EFI, Good Running Machine.

2021 Bandit 3680T Wood Grinder -147 Hours -5 Year CAT Warranty -Excellent Condition - More photos and info coming.

1994 Brush Bandit Model 250 Brush Chipper, Equipped with a Cummins 4BTA3.9 Turbo Diesel Engine, Engine reading 2,000 Hours, Rockford Clutch, Machine recently serviced and has a new turbo. Ready for work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Bandit 2400T Whole Tree Track Chipper , Only 3,021 Original Hours, Undercarriage is 95% Enclosed Operators Cab with Heat and Cold Air, Caterpillar 765 HP Turbo Diesel Engine, Cat Infeed Chain with 4 Roller Feed System., Autofeed , Hydraulic Swivel Discharge, Hydraulic Flapper Engine Pre Cleaners Hydraulic Oil Coolers Rotobec 360 Degree Grapple... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Bandit 3090 4,600 hours on the Cat C18 765 HP Engine, Tires are 11R x22.5 length of unit 39'7" width 9'9" Height 12'4" weight 54000 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Barberan UV Oven

BARKER 600 HP BOILER, BIOMASS-FIRED: -- BARKER Boiler and Fuel System built & tested in 2011 as a pilot unit. Successful testing has been completed. This surplus equipment includes the following main features: -- Combustion Temp Capability- 2,000 deg. F.; Steam Flow 24,000 lbs/hr saturated; Steam Pressure 1,500 PSI @ 600 deg. F. -- Fuel Feed rate - 3,000 Lbs/hr at 1/4" biomass (5% moisture) -- Heat Input - 7,500 btu/Lbs HHV @ 22 mmbtu/hr. -- All equipment has less than 2,500 actual operating hours since installation.EQUIPMENT MAJOR COMPONENTS: Combustor, Cyclonic combustion technology, Refractory lined Heat Recovery. Steam Generator. Rotary Drum Dryer for Fuel drying - capable of 30% moisture reduction (at the above combustion parameters) and 1.5 tons per hour (installed as used equipment).BALANCE OF PLANT FUEL FEED SYSTEM: Live-bottom bin, Bunker, Feed conveyors, Wood hog, Vibrating screen, Drag and screw conveyors. Boiler water system - feed pump, water and steam piping Emissions Control: All required bag houses (SJVUAPCD) California permitted. -- Now REDUCED PRICE from $1.5 million !!

2014 Barko 612 Forwarder, Volvo Engine, Original Hours are 8000 Hours, Enclosed Cab with Heat and Air Conditioning, New Front Tires in Front and Rear Tires are 90%, Centers Replaced, Kesla Loader, 28HD Bucket, Ready for the Woods. Length 33 ft 10 in Width 8 ft 8 in Height 11 ft 3 in Weight 35,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Barko 612 Forwarder, Volvo Engine, Original Hours are 8000 Hours, Enclosed Cab with Heat and Air Conditioning, New Front Tires in Front and Rear Tires are 90%, Centers Replaced, Kesla Loader, 28HD Bucket, Ready for the Woods. Length 33 ft 10 in Width 8 ft 8 in Height 11 ft 3 in Weight 35,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Barko 495ML Joysticks Delimber Good rubber Currently on the job working

2016 Barko 495B -9892 hours -Turntable bearing tight -Kodiak trailer -Tires and lights good -Cold A/c -Hot heat Woods ready

2022 Barko 595B, 2185 hrs., CSI 264 Ultra, Barko 5250 grapple, Pitts Hyd. trailer, CSI 4400 Slasher, $180,000

2021 Barko 595B, 3800 hrs., Hydrostatic, R squared 5628 Delimber, 52” barko grapple, CSI 4400 slasher ready for the woods, $185,000

Barko 160B Log Loader Cummins Engine Hyd Hookup For Ground Saw Lever Controls

2010 Barko 495 Epic Knuckleboom Loader, Joystick Controls, Slasher Package, 5th Wheel Trailer, Cummins Engine, Rotobec Grapple

2008 Barko 495ML, CSI Delimber, Good, Tight Machine

Barko 495 Log Loader Delimber 13,000 hours Bucksaw included

Barko 225 Log Loader Joystick Turntable is good Ctr delimber with topping saw Needs a grapple but we have one available

NEW Barko 295B Loaders, Carrier Packages Available - IN-STOCK!