Equipment For Sale

2023 Bandit 2590 Track Whole Tree Chipper, Equipped with a Caterpillar C-18 755 HP Diesel Engine, ONLY 150 Hours, Air Compressor, Radio Remote Control System, 22" Whole Tree Chipper, Infeed Chute is 7.5'' Long, Caterpillar 4 Year Warranty and Bandit 1 Year Warranty in Effect. Ready for the Woods. Width. 10' 2" Height. 12' 8" Length. 38' 5" Weight. 44,000 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 Bandit SG40, Low Hours, 38HP EFI Kohler, Tracks, Rev Wheel, Ready to go to work.

2021 Bandit SG-75 Tracked Stump Grinder, 75HP Kohler, Remote, Blade, Clean Low Hour Machine, Can Ship Nationwide.

2022 Bandit INTIMIDATOR 15XP Chipper with 378 hours on a PSI 5.7L 165 hp Engine, No PTO, Gas Engine, Murphy PV380 Panel W/ Reversing Auto Feed. Length:15’ 7” Width: 6’ 6” Height 8’ 8” Weight: 8,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Bandit 2290 Track Chipper with 5,700 Hours, Deere 600 HP Turbo Engine, Caterpillar 325 Undercarriage, Infeed System 5-1/2' Wireless Remote System, Enclosed Cab with Heat and AC, Electronic Controls updated by Bandit, Pumps updated to a larger pump, 2nd Owner. Ready for the woods. Weight:40,000 - 46,000 lbs Length:21 feet Width:10 feet 2 inches Height:11 feet 6 inches Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Bandit 4000T 1,300 Hours Pre-emission CAT Diesel 84” Cutting Head Just Serviced New Teeth New Wear-bars Back up camera air ride seat Winch

2018 Bandit Beast 3680T Horizontal Grinder with 1,800 hours, 30 cutter bodies, Radio remote, Magnetic head pulley, Lot of spare parts goes with it. Length: 31' 10" Width: 11' 6" Height: 11' 4" Weight: 75,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Bandit 3590 Whole Tree Chipper, Equipped Currently as a Micro Chipper, Can be Changed, C-27 875HP TIER 2 Engine, NO DEF, Has Original 5200 Hours, Smaller Air Compressor Attached, Wireless and Tether Cord Remote Control, More Pictures Coming. Weight 76,000 lbs Length: 43' 5" Width: 11' 10" Height: 12’ 6” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Bandit 3090 Track Chipper -560 hours -800 hp -Like new Turn key chipper

New In Stock Bandit 3090 Tracked Whole Tree Chipper.

2012 Bandit 4000T W/Mulching Head, 2892 Hours, Deere 425 HP Engine, Please Call For More Info

2005 Bandit Model 4680 Horizontal Grinder, Tri Axle Machine, Cummins 1000 HP Engine, Hours Unknown, Will have hours soon, Radio Remote Control, 4 " and New 2" Screens for Regrind. Length: 36’ Width: 10’ 11” Height: 13’4” Weight: 93,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Bandit 15XP Chipper, 165HP Ford Gas, Hydraulic Winch. Nice machine ready to work.

2008 Bandit 255 Brush Chipper, Equipped with a Caterpillar 142 HP Turbo Diesel with 2500 Hours, Hydraulic Winch, Hydraulic Lift Cylinder, Autofeed System, Hand Crank Height and Swivel Chute, Ready for Work Length: 14' 4" Width: 7' 6" Height: 8' 9" Weight: 12,250 lbs (approximate) Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Bandit 1900 Track Whole Tree Chipper, Cummins 535 HP Engine, Has 3900 Hours, Joystick Controls/Foot Pedal, Several Extra Sets of Knives, Counter Knives and Anvil , Undercarriage 75%, Enclosed Cab with Heat and AC, AC needs a Charge, New Clutch Engagement Switch Ready for the Woods. Weight 66,500 lbs. Length 285” Width 130” Height 142” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Bandit Beast 4680 Track Horizontal Grinder, Equipped with a Tier 2 CAT C-27 1050 HP Turbo Diesel Engine with 3,500 Hours, Reverse Fan ,Compressor , Magnetic Pulley Head on Shorter Length Discharge Chute , Additional Screens all sizes, Undercarriage 95% Wireless Remote Control with Tether Cord Electric Winch for screen installation... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Bandit 2550 Self Propelled Stump Cutter with Deutz 44 HP Diesel Engine, 1,450 Hours, Tether Cord Remote and Wireless Control, Dual Rear Wheels, Hydraulic Swing Speed, Two Speed Drive, Front Grading Blade, Ready for Work. Width: 35” (89cm) Height: 53” (135cm) Length: 120” (305cm) WEIGHT: Approximately 820kg Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1994 Brush Bandit Model 250 Brush Chipper, Equipped with a Cummins 4BTA3.9 Turbo Diesel Engine, Engine reading 2,000 Hours, Rockford Clutch, Machine recently serviced and has a new turbo. Ready for work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 horizontal grinder/chipper mobile track 2800 hours New twin Disc clutch New conveyor New 3 stage pump New cutter mill drive belts Currently mill is converted to chip knives Have all cutterbodies, teeth, screens and gate to convert to grinding.