Equipment For Sale

2008 Baker MDL BBR-O 2 HD Band Resaw S/N 08-4001

2013 Baker M4I DeDuster with hopper infeed and variable speed drive and three 2hp brush heads. Electric complete with 480 voltage, panel, and pedestal mounted start and stop station. $6,500.00

Baker 6-head resaw, electric drive, good working condition

BAKER Model 3640E Blue Streak Electric Sawmill Like New BAKER Model 3640E Blue Streak Electric Sawmill S/N 07-570. 36” diameter log x 24ft. maximum length 40 HP main motor with 10 HP HPU wired for 460 volts, separate control panel on pedestal to turn the system on/off. Includes an Inline Debarker cutter that travels with the head while it travels down the log. Has the Trailer Package, and 10” wide x 12ft. Roller Conveyor Model BCS-O S/N 07-642 for the outfeed, with manual foot pedals kickers to send the boards to the right or the left, and includes lots of extra sawblades. Current new price over $100,000. This was built in 2007 but has had very little use and has been stored inside. See photos of on our web site. Inventory No.KF1.

12" capacity 25HP motor 460 volt 3-phase

The Baker M4i DeDuster has been designed to be a super-high-performance dust removal machine that will accept and remove sawdust from the highest production multi-head horizontal band resaw today. The M4i DeDuster can operate at over 700 feet per minute! Boards drop into the M4i DeDuster hopper. The hopper’s height adjustment (for the amount of lumber), indexable stops (for the length of the lumber), and adjustable fence (for the width of the lumber) allow you to set it up for the most efficient operation. This virtually eliminates jam-ups. The hopper’s variable-speed conveyor sends the lumber through the M4i DeDuster chamber one piece at a time. The rear height adjustment of the conveyor can be adjusted from a minimum of 24" and up to 34" maximum. Inside the M4i DeDuster chamber, high-speed brushes clean all four sides of the boards. The independently powered brushes are fully adjustable for longer brush life. The specially designed chamber maximizes air flow, directing the dust out the dust chamber instead of back onto the boards. The entire side of the chamber easily opens for full open accessibility. The Baker M4i DeDuster comes with its own electrical panel and a stand-mounted, remote start/stop control station.

This is a slightly used 2022 model 26” air activated chop saw with a 15hp motor wired for 480 voltage. It comes complete with the electric panel and controls. It has a 10’ idler infeed roll case with fence and a 5’ idler outfeed with a 48” stop bar and 4 manual stops.

Baker model a bandsaw with return conveyor

Baker Band Resaw BBR-O Return Conveyor

Stationary Baker Blue Streak Baker Coresets computer set works with 8 board sets and 8 core sets 74HP Kohler Diesel (Does not require DEF) Large 28'’ precision machined solid steel band wheels I-Beam frame with solid steel bunks Up to 40'’ diameter logs Moveable guide opens to 36'’ wide cut Large easy to see measurement dial Standard 1.5'’ or 2'’ blade option Cutting length 20'6'’ Board drag back return Fully hydraulic, log loader, clamp, fence arm, toe rollers, variable speed dual chain drive. head raise and lower, log turner forward and reverse up and down, movable guide, built in 10 gallon tank, & controls Blade enters clean side of log after first cut and rotation operator controls in one convenient location Four post heavy duty tube frame head 23 gallon frame mounted fuel tank Hydraulic Blade tension 5 gallon tank with dual valves for blade lube drip baker bullet guides

2000s l 10HP l 220v/440v l 3 phase motor

BAKER Model ABX Horizontal Band Resaw Like New BAKER Model ABX Horizontal Band Resaw S/N 08-397. 12” wide x 12” high cutting capacity with 30 HP 460 volts main motor with build in HPU unit has the optional outfeed rubber conveyor roll down to run thin material, the tilting feature to run bevels with the Smart Tool digital readout, and it has 12” wide x 86” long belt conveyor on the Infeed run of the machines HPU it is stand alone. Machine is on casters so it is easy to move in & out of position, it also has Easy Quick Change Electrical plugs. Includes lots of extra sawblades. Machine was built in 2007 and has not been used and stored inside. Dimensions machine: Length 84" x width x 72 1/2" x height 68" Weight 2000 lbs., Current new price prox $29,000. See photos of on our web site. Inventory No. KF2 .

Baker complete run-around system for grade resaw, electric powered, includes cab and all controls, good working condition

Baker board deduster, 8" wide capacity, lineshaft ready, good working condition

2 - Baker Stacking Racks available

2019 Baker Ambi-Trim | 6 Heads | Infeed System w/ Unscrambler | 20' Max Length | Good Running Condition | 480V

Baker Dual Head Re-saw (horizontal) 1 1/4" band, 16" cant capacity. 2 Baker turn arounds with cant turners and 4 Baker brush de-dusters. All machinery has been stored in a building since we stopped sawing in 2008. Please call with any questions. $40,000 OBO

1997 Baker 4 HD Resaw with Full Return

Late 90's model | 480v