Equipment For Sale

2019 Freightliner 122SD X15 500 HP 18 Speed Air Ride

2011 Freightliner M2 Chip Truck, 116,000 miles, 6 Speed Manual Transmission. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

MLS Number 12709353 2007 Freightliner M2 Flatbed Truck 271,372 miles Mercedes Benz engine Allison 6 speed automatic Not CDL 27'3" bed Air brakes spring suspension

Parts machine log turner hydraulic power pack other parts

Frick Timber-Tiger 10" Double Arbor Gang Rip Saw 36" opening includes 15' shifting infeed with 10" ladder back chain. (2) 300hp 1775 RPM electric motors

Frick Saw Husk with Top Saw

Frick 38" 4 Head Block,Track, Paneagraph,Husk frame cab controls, Top Saw 36" and 56" Blade on Husk, Carriage & Track with T-Berry carriage Drive.

Frick 3 HB carriage, track, husk, cab & controls

Frick 4 Head Block Carriage With Track & Carriage Drum Drive, Husk, Cab & Controls

Frick 00 Sawmill 4 head block 471 Detroit (missing radiator) 4 saws Steel track New wheels and bearings Needs some work

Frick Sawmill 4 Head Block Mounted on a drop deck trailer. Everything folds up for transport. Includes: Cummins motor

1980's Frick O1C Circular sawmill -2 saw 50 H,P Vertical edger -150 H.P electric motor -Deck is a 4 strand 25' Melot and Turner -Carriage has 4 Head Blocks with air dogs and tapers. -Mill is disassembled and ready to move now. Will have machinery on site to load mill up.

Frick Gang Edger (no motor) 636 S/N 160 with Gang of Blades.

FRUILMAC RANDOMAT-E End Matcher;For end-matching flooring or cabinet & entry door rails; the feed-thru system allows continuous feeding of random-length parts with any kind of profile.Specifications: -- Width cap. of 1-3/16" to 9-7/8"; length cap. of 6-5/16" x 137" length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness capacity. -- Approx. (10) cycles/Min depending on part length & width; -- Feed system with (2) 120" long x 10" wide powered infeed & outfeed belt conveyors, parts are automatically fed & positioned with sensors, and a positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle is automatic. -- Parts are conveyed past the 1st & 2nd shaper head, automatically reversed, and positioned to a positive stop for the 2nd cut on the other end of the part. At the same time, the 1st shaper head would be coping the 1st end of another part.Equipped with: -- Twin 7.5 HP - 7,500 RPM high-speed shaper motors, which pneumatically traverse in tandem for each cutting cycle. -- Touch-screen SIEMENS Controller, PLC controlled conveyor & shaper cut cycle for automatic operation. -- Variable feed speed conveyor line; shaper head advance with led readout on the controls. -- Cutting station with overhead holddown wheels and 4-point pneumatic clamping with (2) overhead & (2) horizontal clamps.Includes:(4) set of used tooling

FRUILMAC RANDOMAT E - End Matcher; -- For End Matching flooring or cabinet & entry door rails or tongue and groove. The feed-thru system allows continuous feeding of random length parts with any kind of profile.÷Capacity & Description: -- Width cap. 1-3/16" x 9-7/8'; length cap. 6-5/16" x 137" length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness cap. -- Approx. (10) cycles/Min depending on part length & width; -- Feed system with (2) 120" long x 10" wide powered infeed & outfeed belt conveyors, parts are automatically fed & positioned with sensors. -- Positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle is automatic. -- Parts are conveyed past the 1st & 2nd shaper head, automatically reversed and positioned to a positive stop for the 2nd cut on the other end of the part. At the same time the 1st shaper head would be coping the 1st end of another part.Equipped with: -- Twin 7.5 HP - 7,500 RPM high-speed shaper motors which pneumatically traverse in tandem for each cutting cycle. -- Cutting station with overhead hold-down wheels and 4-point pneumatic clamping with (2) overhead & (2) horizontal clamps. -- Controller & Operator Interface: Key Pad SIEMENS Controller, PLC controlled conveyor & shaper cut cycle for automatic operation, variable feed speed conveyor line, and shaper head advance with LED readout on the controls. -- Includes Infeed and Outfeed Conveyors

Friulmac Rondamat E End Matcher

FRUILMAC - RANDOMAT E: End MatcherFor end matching flooring, cabinet & entry door rails, or tongue & groove. The feed through system allows continuous feeding of random length parts with any kind of profile. -- Capacity & Description -- Width cap.: 1-3/16" x 9-7/8'; Length cap.: 6-5/16" x 137" (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness cap. -- Approx. (10) cycles/Min depending on part length & width. -- Feed System with: (2) 120" Long x 10" wide powered infeed & outfeed belt conveyors; parts are automatically fed & positioned with sensors. -- Positive stop to the 1st vertical shaper head (2nd shaper head is next to the 1st one); cope cycle is automatic. -- Parts are conveyed past the 1st & 2nd shaper head; automatically reversed & positioned to a positive stop for the 2nd cut on the other end of the part. - At the same time, the 1st shaper head would be coping the 1st end of another part.Equipped with: -- Twin 7-1/2 HP - 7,500 RPM high-speed shaper motors, which pneumatically traverse in tandem for each cutting cycle. -- Cutting station with: Overhead holddown wheels; 4-point pneumatic clamping with: (2) Overhead & (2) horizontal clamps. -- Controller & Operator Interface: Keypad: SIEMENS Controller; PLC controlled conveyor & shaper cut cycle for automatic operation; variable feed speed conveyor line; shaper head advance with LED readout on the controls. -- Includes Infeed & Outfeed Conveyors.

FRUILMAC - RANDOMAT-E: Random Length End MatcherFor end matching flooring or cabinet & entry door rails; the feed through system allows continuous feeding of random length parts with any kind of profile.Specifications -- Width cap.: 1-3/16" - 9-7/8"; length cap.: 6-5/16" x 137" length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness capacity. -- (10) Cycles/Min (approx.): Depending on part length & width. -- Feed system in/out with: (2) 156" Long x 11" wide powered infeed & outfeed belt conveyors; parts automatically fed & positioned with sensors; positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle: Automatic; driven by (2) 1-1/2 HP motors. -- Parts: Conveyed past the 1st & 2nd shaper head; automatically reversed; positioned to a positive stop for the 2nd cut on the other end of the part. - At the same time, 1st shaper head would be copying the 1st end of another part.Equipped with: -- Twin 7-1/2 HP - 7,500 RPM high-speed shaper motors, which pneumatically traverse in tandem for each cutting cycle. -- Touchscreen SIEMENS Controller; PLC controlled conveyor & shaper cut cycle for automatic operation. -- Variable feed speed conveyor line; shaper head advance with led readout on the controls. -- Cutting station with: Overhead holddown wheels; 4-point pneumatic clamping with: (2) Overhead & (2) horizontal clamps.

FRIULMAC - MULIREX: End Matcher with: Stackable SpindlesEnd Matcher with: Stackable Spindle for fast Changeover!Equipped with: -- (2) Profiling Motors: 10 HP (7-1/2 kW). -- (2) Tool changer motors: 1/2 HP (0.25 kW). -- (2) Infeed/Outfeed conveyor belt motors: 1-1/2 HP (1.10 kW). -- Central conveyor belt: 3/4 HP (0.55 kW). -- Min. part length: 4-7/8" (120 mm). -- Min. part width: 1-3/16" (30 mm). -- Max. part width: 9-7/8" (250 mm). -- Min. part thickness: 1/2" (10 mm). -- Max. part thickness: 1-3/16" (30 mm). -- Min. cutter diameter: 6-5/8" (170 mm). -- Max. cutter diameter: 7-7/8" (200 mm). -- Diameter spindles: 50 mm. -- Spindle length: 11-1/4" (285 mm) under the nut for stackable tooling. -- Cutter speed: 9,000 RPM. -- Dust ports: (4) 4-3/4" for each spindle (2 on the top & 2 on the rear side).

FRIULMAC - Dual-Feed, ...Double End Cut-Off SawFor squaring workpieces and for transportation to a Planer or Moulder with a straightening table.Specifications: -- 79" Max. (2,000 mm) opening from Saw to Saw. Motorized opening with LED readout on the control panel; left-hand fixed with left-hand fence line. -- Hopper Magazine - material capacity: Min. length: 7.87" (200 mm), max.: 79" (2,000 mm); width: 1-1/8" (30 mm) to 6-3/4" (170 mm); and thickness: 0.59" (15 mm) min. up to 2-3/8" (60 mm) max.; hopper stack height: 23-1/2" (600 mm).Each side is equipped with: -- (2) Trim saw motors, 5.36 HP each; saw blade dia. 9.84" (250 mm). -- Hydraulic feed drive unit: 4 HP (3 kW) motor. -- Trimming & throughput capacity: Up to (55) pieces/Min.NOTE: Voltage transformer for 600 Volts available with the machine