Equipment For Sale

Morbark 58" 3K Chipper w/150Hp 1725 RPM Motor

2016 Morbark 4600XL Horzontal Track Grinder, Cat C27 with 7,500 hours, Magnetic Head Pulley, Radio Remote. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1994 Morbark Model 1200WCL Tub Grinder, Caterpillar 3412 Engine, hours unknown, Joystick Controls, Square Wear Plates, Enclosed Cab with Heat, Clutch replaced recently, 4" Screen and 2" Round Secondary Screens. Length 36 ft 0 in Width 11 ft 11 in Height 13 ft 6 in Weight 50,020 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1993 Morbark 1000 Tub Grinder -Hours unknown -3406B CAT engine 425 HP -No blowby -Rods and spacers been replaced with oem parts -Clutch new -Hammers new Turn key good little grinder !!!!!!!!!!!

Morbark Debarker/Post Peeler Owner has interchangeable heads from Morbark 30 foot Infeed conveyor

2019 Morbark MXG42 Wheeled Stump Grinder, 399 Hours.

16' Log Trough with Kicker. #00890

2011 Morbark 40/36 Drum Chipper 7400 hours. John Deere 600 HP engine , It has been through shop completely. Width: 8'6" Length: 37'5" Height: 12'4.25" Gross weight: 52,500 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 Morbark 6600 Horizontal Grinder, Cat C32 1200hp with 5,596 hours, Radio remote, Magnetic head pulley. Weight: 91,440 lbs. Length: 44'11" in transport Height: 13'6" in transport Width: 11'10" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Morbark M18R Drum Chipper, 200 HP John Deere with 4,900 hours, Hydraulic front jack and discharge chute, 5000lb winch, Manual rear outriggers. Gross weight: 11,000 lbs Length:21 ft 2 in Width:7 ft 7 in for single or tandem axle, 8 ft 5 in for single axle dual wheel Height:9 ft 6 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Morbark 40/36 Whole Tree Chipper, 600hp Deere with 8994 hours, A3 Drum, Light package, Remote, Rear stabilizers. Length 37'5" Height 12'4.25" Width 8'6" Weight 52,500 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Morbark M12R chipper, 12" capacity chipper, 89 HP GM gas engine, live hydraulic pump, auto feed, twin crusher cylinders, hand crank swivel discharge, excellent tires, new knives, fresh service, ONLY 410 hours! Gross Weight (approximate): 6,400 lbs Length: 13'9" Width: 6'3" Height: 8' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2024 Morbark 1821 Eeger Beaver Wood Chipper, 165hp Ford Gas Engine with 69 hours, Winch, Lift Cylinder, Hydraulic Turn Discharge, Like new with Warranty, Excellent condition. Weight 8,900 lbs Height 8'11" Width 7'3" Length 18'1" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1996 Morbark 1200 -CAT motor approximately 3500 hours -Motor was replaced at 7000 hours -Engine runs great -Rollers and the Chain that turns the Tub need some work -Have the rollers for it Budget Grinder !!!!

2018 Morbark 4600xl Horizontal Grinder, Cat 1050hp, 6952 hours, Radio Remote, Magnetic Head Pulley. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Morbark 4600XL Track Horizontal Grinder, Cat 1050hp 8003 hours, Pt tech clutch, Radio Remote, Magnetic Head Pulley. Weight 88,640 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1983 MORBARK RXL 27 TOTAL CHIP HARVESTOR 5,110 HOURS 600 CUMMINS UPDATED SPREAD BEARINGS RUNS GREAT WORK READY FINANCING AVAILABLE WITH NO MONEY DOWN GRANITEHE.COM

2017 Morbark 4600XL Track Horizontal Grinder, Cat 1050hp 8003 hours, Pt tech clutch, Radio Remote, Magnetic Head Pulley. Weight 88,640 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

The Morbark 950 Tub Grinder is a reliable choice for handling your grinding needs, equipped with a powerful Cat C8.8 engine. With 3525 hours of operational use, this unit has been maintained in good working condition, offering efficiency and reliability for a range of applications. Ideal for industries requiring heavy-duty grinding capabilities, the Morbark 950 is designed to handle various materials efficiently. This used grinder provides excellent value for money, with a recently reduced price enhancing its appeal. It's a dependable machine for professionals seeking quality and performance in their operations.