Equipment For Sale

Meadows board edger, 4" thick x 36" wide capacity, infeed rollers, outfeed is a tilt table, line-shaft ready, 2 blades-1 is movable, good working condition

Meadows #2 Sawmill w/ 50’ of track / (2) movable saw vertical edger, husk frame, carriage drive, log turner, mill is complete w/ (2) strand infeed log conveyor, green chain, barn sweep under head saw w/ outside incline stacking section, Detroit 450 KW genset, 150 HP head saw w/ all wire and conduit included, Ref #205

Meadows Mills 6” Spartan Gang/Edger

Meadows Mills Spartan 6" Edger Gang

Meadows #1 Mill, diesel power w/ Miner 332 edger, gas engine - Miner 332 portable edger – (2) saw, S/N 9700, rated 3” material, mounted on carriage, 4” rip fence, Kohler gas engine 25 HP w/ infeed & outfeed, (1) movable saw, additional saw plates, (4) adjustable legs that fold in, 20’ portable (2) strand log deck, hydraulic motor w/ hoist drive, H-78 chain, under carriage to relocate, Meadows # 1 24” (3) HB carriage, hand set works, hydraulic & electric dogs runs on phase converter w/ triple bearing husk frame, 56” inserted tooth saw, S/N 4MF-1439-94, chain type log turner w/ onboard hydraulics, foot control log dec, hand controls to actuate dogs & log turners, foot, blower under husk frame w/ discharge pipe, cuts 16’,14’ x 16” outfeed belt conveyor, (2) outfeed gravity roll case, axles for mobility w/ 60 Series 6-cylinder w/ PTO sheaves and fuel tank…$45,000 Also available with mill only both or one or the other can sell with mill. MILL MUST SELL FIRST Case 585E Construction King 4 x 4 forklift, S/N 409-05-9019, triple mast w/ rebuilt cylinder, 4,920 original hours…$16,500 International (early 90’s), gas engine w/ Serco 8000, S/N L3001 w/ outriggers w/ PTO & hydraulic motor & reservoir, 2,681 hours, 4BT Cummins engine…$16,500 Ref #207, Contact Ethan Mealer for more information (931) 607-4738

Meadows 4 headblock carriage, Model; #3 DELUXE, 43" center to center wheels, 110 volt over air solenoids, good working condition

#114 • Meadows Sawmill -- Specifications & Features -- Make: Meadows. Serial #: 3D004-98. Power Type: Electric. Power: yes. Manual: no. # of Headblocks: 4. Modular Mill Type: Hydraulic. Blade Size on Husk: 56”. Overall Dimensions: 53' long. Setworks: yes. Setworks Make: 110/Hyd. Automated: yes. Carriage Dimensions: 15’. Log Deck: no. Log Turner: yes. Dust Blower: no. Edger: no. -- Seller Statement -- 43” c-c of track, climate controlled cab. Computerized controls, tung dog, can’t kickers, chain type turner, includes support steel to ground, Rigging Fee $8,000, Does not include the support steel to the ground.

Portable 2HB Power Receder - Right-hand (can be converted to 4HB) - Hydraulic dogs and hydraulic feed - Includes 1 extra blade - In good condition ?? Call 270-218-2446 – Make your OFFER today!

MEADOWS MILLS 36 DELUXE STATIONARY BOARD EDGER -- Handset board edger, all mechanical functions, and fixed feed speed -- Welded steel frame constructed with 6 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 20 feet, bay is 36"; wide -- Four live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one shifting saw collar, each with a 16"; diameter split carbide saw -- 30 HP electric motor mounted on edger -- 480 volt magnetic motor starter -- Belt drive with belt guard -- Infeed and outfeed tables with dead rolls -- Laser lights aligned with each saw

Meadows Trojan 36" x 7" Fixed Arbor Gang Saw w/75hp Motor, 8' Gravity Roll Infeed with Powered Cant Positioner, Laser Light System with 6 Laser Lights & 36" x 13' 6" Powered Outfeed

MEADOWS MILLS 36 DELUXE STATIONARY BOARD EDGER -- Hydraulic board edger, all push button functions, and variable feed speed with flow control -- Complete hydraulic power source belt driven from mandrel of edger, includes oil tank and oil cooler -- Welded steel frame constructed with 6 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 20 feet, bay is 36"; wide -- Four live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one shifting saw collar, each with a 16"; diameter split carbide saw -- 60 HP electric motor mounted on edger -- 480 volt magnetic motor starter -- Belt drive with belt guard -- Infeed table and outfeed tables with dead rolls -- Laser lights aligned with each saw

For sale, one (1) reconditioned Meadows grits separator, bottom discharge. This unit is belt driven by a 3 HP 3 phase electric motor. Magnetic motor starter available for additional cost. You can pick up the grits separator in North Wilkesboro, NC or we can arrange for its shipment. If you’re interested please call 1-800-626-2282.

Meadows #2 - 3HB Modular Mill w/Husk Frame, Offing Belt, Overhead Mud Saw, 4 x 5 Control Cab, Computer Setworks & Hyd Drive System, Log Turner, 56" Saw Blade, 100HP Motor, Debarker for Saw Cut. Out and Ready to Ship

MEADOWS MILLS 3 STRAND DEBARKER STOP-N-LOAD LOG DECK -- Deck strands constructed with 4" x 8" x 1/4" wall tubing -- Chains run in 4" channel lined with UHMW wear strips -- Hydraulic Cylinder: One 2" x 12" with 1 1/2" rod -- Chain is WR-78 -- Front and rear crossbars are constructed with 6" wide flange beam -- Debarker style stop-n-load -- Hydraulic drive with Auburn (or equivalent gear box from alternate manufacturer) gear box -- Strand spacing is determined by buyer, standard is 6 feet -- Controls: not included in base price -- Legs may be included for an additional cost -- Log decks are disassembled and bundled for shipment

Meadows 5 HP Small Blower with Electric Motor

Meadows 16' 3 Strand Log Deck w/Drive

Meadows Chain Turner

The Model 120H log turner utilizes two (2) 2 inch by 12 inch hydraulic cylinders with 1 1/2 inch bores to lift its head. The log turner chain comes standard with 13 teeth that are 1 inch wide. The head is chain driven by a Char-lyn 104-1253 hydraulic motor (included). The drive includes a 13 teeth and 25 teeth sprocket and number 80 chain with chain guard included. Controls, not included, with hoses sell for $2,490.00. 20 GPM Hydraulic power sources, not included, sell for $7,320.00. All prices are FOB North Wilkesboro, NC 28659. For questions please send an email to [email protected] or call 1-800-626-2282, ask to speak with Brian Hege. To place an order please call 1-800-626-2282, ask to speak with Brian Hege.

Meadows Gang Edger

NEW Meadows 3 Saw Edger