biomass Equipment For Sale

2005 Diamond Z 1460 Tub Grinder with Loader, Enclosed Cab with Heat and Red Dot AC. Air Conditioner needs some work, Engine has 7,500 Hours, Caterpillar 3412 1000 HP Diesel Engine, Has various Screens and extra teeth, Has NEW Radiator, Oil Cooler, Injector Pump, New Belly Conveyor, New Tires and Brakes, New Loader boom tunes and lines, Rotobec 270 Degree Grapple, Ready for Work. Weight 63,000 Lbs. Length 35'10" Width 11'11" Height 13'6" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Diamond Z 5000 -10,200 hours -Belts good -Mill has been serviced -Machine is serviced regularly Turn key unit if the machine needed it the issues has been fixed.

CAT C32

2011 Diamond Z DHZ 7000 -1100 hours on new C32 -New mill Chain -New Chain deck -New drum and Bearings -1/2 the hammers are brand new -New BRG -New Radiator Machine was gone through with a comb MORE PICTURES COMING SOON!!!!!!!

2001 DIAMOND Z 1460B-15 TUB GRINDER REDUCED All new joy couplers new tires new hoses cat 3412 engine remote everything works currently used 1-2 times per week

2006 Diamond Z 1463B Tub Grinder, Cat 1050hp, 1000 hours on remain engine and rebuild, Radio remote, Magnetic head pulley. Weight 98,000 lb Length 46' Width 11'11" Height 14' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2001 Diamond Z 1463B Tub Grinder, Frame hours are unknown at this time. 400 hours since 3412 rebuild. Everything runs as it should. Grates supports will need to be address as some point. Weight 98,000 Length 46' Width 11'11" Height 14' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Doosan DX225LX-3 Excavator with a Fecon Mower Attachment along with Stump Grinding Attachment. Fecon Model BH80 Pony Motor with Caterpillar C-7 with 300 Hours. The Doosan has 4,000 Original Hours, Bearings on Mower were done 100 Hours Ago, Good Undercarriage, Enclosed Cab with Heat and Air Conditioning. Operating Weight 48,281.3 lb Ground Clearance 1.58ft in Height To Top Of Cab 9.77ft in Length Of Track On Ground 14.59ft in Tail Swing Radius 9.16ft in

2023 DuraTech 6010 -Brand New Can be on Wheels or on Tracks -Cat C-15 540 HP Tier 4 -2 year full Cat Warranty -One year end to end duratech warranty -10’ wide tub with foldable sides for transport under 8’6” -27’ Stacking Conveyor, swings 45 degrees, with magnet roller and chute -Can be 5th wheel or pintle hitch -Will be ready within 6 weeks with deposit -Machine is built, just waiting for customer decided options for assembly Many machine options available with different price ranges to suit your needs!!!!!!

2013 Duratech 3010 Tub Grinder -2567 hours -CAT engine -Hour meter is foggy but still functions -Will install new mill bearing Prior to Shipment Reduced

2009 Duratech 3010 10’ Tub Grinder, Cat C-15 575hp with 5500 hours, PT Tech Clutch, Mill is in excellent condition, 4” Round Screens, Was used to regrind bark mulch, Ready to Grind. Weight 44,620 lbs Length 36'4" Width 8'6" Height 11'4" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

The VORTEX® V18-32 has the largest infeed throat of any brush chipper measuring at 18 inches high by 32 inches wide .... 15% to 35% more chipping capacity than any in its class. This makes it suitable for multiple markets others can't handle. Tree care, municipalities, utility line maintenance, golf course management, and even light land clearing are all better suited to the VORTEX® V18-32 than others in its class. Hand fed or machine fed, the "oversized" opening makes feeding and operating best in class. While operators of other brands must "cut to the opening", VORTEX® V18-32 operators can process limbs, branches, and even small whole trees as-is, bringing truth to the statement of "less trim time" that others claim. Another feature of the VORTEX® V18-32 design is the ability to throw chips wet or dry, in ANY direction, with velocity unequaled by any other drum-style chipper in its class. This model matches and can even exceed the throwing capability of a disc-style chipper. Add in the revolutionary skinless-no pocket drum, you have the highest capacity, most productive machine in the 18-inch class available in today's market.

While most chippers in this class have openings 12 inches high and from 15 inches to 20 inches wide, the VORTEX® V12-31 has an opening of 12 inches high by 31 inches wide .... 50% to 80% bigger. This makes it suitable for multiple markets others can't handle. Tree care, municipalities, utility line maintenance, golf course management, and even light land clearing are all better suited to the VORTEX® V12-31 than others in its class. Hand fed or machine fed, the "oversized" opening makes feeding and operating best in class. While operators of other brands must "cut to the opening", VORTEX® V12-31 operators can process limbs, branches, and even small whole trees as-is, bringing truth to the statement of "less trim time" that others claim. Another feature of the VORTEX® V12-31 design is the ability to throw chips wet or dry, in ANY direction, with velocity unequaled by any other drum-style chipper in its class. This model matches and can even exceed the throwing capability of a disc-style chipper. Add in the revolutionary skinless-no pocket drum, you have the highest capacity, most productive machine in the 12-inch class available in today's market.

2013 Conehead 585 22" Whole Tree Chipper with 500hp John Deere Power Unit

Eagle’s Pack 720 PRO delivers superior contaminant detection of large packaged products at high-line speeds. It has a detection coverage of 720 mm (28.3";) at the belt and is capable of high-speed imaging up to 76 meters per minute (250 FPM). With the use of a bar code reader, the x-ray machine can run mixed cases for complete inspection. It is also capable of multilane inspection which enables manufacturers to inspect multiple lanes of the same or dissimilar products, or alternatively use one lane for production and the other for rework. The Pack 720 PRO is simultaneously capable of performing following inline quality control checks: Contaminant detection Mass measurement Package integrity Component countTechnical Specifications:(27.9″) wide at the belt, 375 mm (14.7″) wide at the top of aperture; 381 mm (15″) overall height --15″ TFT color touch screen; Windows 10 Enterprise LTSB with Eagle SimulTask™ 4 PRO Control & Imaging Software; TeamViewer™ service tool for remote machine diagnostics & product set-up services --762 mm (30″) wide belt by 1829 mm (72″) long with no reject; 2743 mm (108″) long with 1 reject -- XRAY Power Single vertical beam; 140W (140kV, 1mA); 420W (140kV, 3mA); 420W (84kV, 5mA)

EARTH CARE PRODUCTS, INC. "DB-1030" (10.5 Ft. x 32 Ft.) TRIPLE-PASS DRYING SYSTEM, W/GAS BURNER:Complete with the following major components: -- 10.5 Ft. x 32 Ft. (despite the model DB-1030) Triple-pass Insulated drum. -- Trunnion Bases, and 30 HP Drum Drive. -- High efficiency Cyclone, Cyclone outlet Airlock. -- 100 HP Dryer Main Fan, and Ducting. -- 25 MM BTU Gas Burner complete with Refractory Lined Furnace and Gas Train. Notes: The Trunnion Tracks and Trunnion Wheels are in good condition as is the drum interior. The system was renovated in 2015 and not used much after the work was done. The equipment is still in-place.

VALVE BAGGER ECC 770MODEL 770 FORCE FLOW PACKER: -- Pressurematic Gross weighing air actuated valve bagger with positive air pneumatic circuit, air operated pinch tube cutoff, manual bag chair, mild steel construction.STANDARD SPECIFICATIONS: -- Manual start switch, 12″ butterfly valve, and actuator, Dust collection connection, Scale beam weighing, 3-way separate exhaust, Filling spout as per your bag specifications, 8″ x 12″ sight glass in the upper chamber.AVAILABLE OPTIONS, PRICE QUOTED ON REQUEST; -- (1) Low-pressure air pump assembly, consisting of 5 HP motor and "Roots 36" rotary pump, complete with inlet filter silencer and discharge silencer, pressure weighted relief valve. 197 CFM @ 6 PSIG maximum air requirements. Does not include a starter. Uses 3-phase power. -- (1) Electronic weighing, with Rice Lake 920i digital controller, 500# “S"; load cell. -- (1) Bulk and dribble cylinder, interfaced to electronic weighing controller. -- (1) Power discharge chair, for use with a conveyor. -- (1) 304ss Contacting surfaces. -- (1) Bag seal circuitry on filling spout, to inflate within bag's valve for dust control.

ECC SR 206 AUGER VALVE BAGGERGross Weighing Auger Valve Bagger with Air Actuated Bag Clamp, Manual Bag Chair, Mechanical Scale Weighing, Mild Steel ConstructionSpecifications: -- 5 HP TEFC Motor -- Nema 12 Electrical Controls, with Forward and Reversing Starter. -- Scale Beam Weighing (mechanical weighing), Weight range 20 Lbs to 110 Lbs -- Filling Spout as per Specification (Recommend 3" OD for 5-1/4"+ Valve Bag) -- Manual Chair -- V-Hopper for Free Flowing Products. -- Loaded on your truckOptions Available ( not included in selling price) -- Electronic Weighing -- Spike Agitator in Primary Hopper -- 304SS Contacting Surfaces -- Loaded on your truck

2018 Edge TRT516 Trommel Screen -3000 hours -16' drum with brush -Tracked unit -Intelligent load sensing and variable speed controls Turnkey unit working daily!!!!!

EHW ITALIA designs, manufactures and supplies belt dryers, single or double-decker (one above the other), of several size from 500 up to 30000 kg/h of dried product, in order to dehydrate different types of materials such as biomass in general, industrial sludge, etc., characterized by low dust emissions in the environment. They can be combined with cogeneration plants, designed and built for quality drying and performed in optimal times depending on the raw material and removing the risk of fire during the working cycle. EHW can supply belt dryers of several size, 3 – 4, 5 – 6 meters wide and long according to request and therefore to be defined, in order to dehydrate materials with low dust emissions into the environment. Our dryers are designed and built for quality drying performed in optimal times depending on the raw material, type of wood, humidity, size and required hourly output. The high performance EHW dryers are equipped with the best components and require low maintenance. Each machine is specifically designed for the requests of our customers, and supplied in different sizes based on the type and quantity of product to be dried, adapting perfectly to the residual energy created through cogeneration plants. EHW dryers are distinguished by their strength and long life, their optimal thermal efficiency,extreme ease of use and a high level of functional safety. They guarantee optimal drying of the product, using low temperatures with significant energy saving, low impact on operating costs and an important economic revenue. The dryers are equipped with auger loading bunkers, ensuring a homogeneous distribution of the product on the belt, a crossed belt, a drying tunnel complete with systems for dust extraction, belt centering and cutting-edge product handling, and a structure made of sturdy steel profiles. EHW dryers are perfectly suited to our customers’ heat generators, whether they use hot water with heat coming from cogeneration plants or from hot smokes recovered from production plants, using increasingly advanced and modern systems to desiccate the raw material. We also offer a wide range of equipment such as automatic belt washing – making the cleaning process quick and efficient and ensuring perfect performances with reduced operating times, fire-fighting devices, and heat recovery systems, significantly limiting the request for thermal energy of the plant, and much more.